Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Palm Springs
Custom windows and doors in Palm Springs, FL usually means one of two things: you’re replacing original aluminum jalousies that can’t meet Palm Beach County wind-borne debris code, or you want something shaped, sized, and built for an older CBS home that standard off-the-shelf units will never fit. Most jobs run $900 to $4,800 per opening depending on size, impact rating, and what our crew finds behind the old frame. TruePane Windows & Doors handles the whole job, permit to final inspection, and a live person answers when you call (561) 708-6771. We serve Palm Springs daily, and our Custom Windows & Doors team has spent years opening up these 1950s and 1960s block homes. If you live in Palm Springs, you already know the old aluminum frames don’t come out clean. We plan for what’s behind them before we quote.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Custom Windows & Doors Company
Palm Springs homeowners call us because we know what a jalousie-to-impact swap actually entails. This village is dense with single-story CBS homes built between 1950 and 1975, and the original window and door openings were never flashed the way current Florida Building Code demands. Our crews have opened enough of those walls to know where the rot hides and how to correct it without turning a Palm Springs Window Replacement into a six-week ordeal. Local customers see that difference on the estimate, not just in the finished opening.
Our installers are background-checked and uniformed, and they measure every opening twice before a quote is written. We’re not a franchise operation. We’re owned by Dale Kessler, a second-generation glazier who founded this company in 2008 on a simple rule: if the pane is not true, the job is not done. That standard governs every permitted impact window we set in Palm Springs, from a single custom shape window to a full curtain wall on a commercial storefront along Congress Avenue.
We register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it means you know the exact duration and coverage on your Andersen, Pella, Marvin, or Milgard units the day they’re installed, not buried in a file you never see. Backing it up is our Done Right Promise. If something isn’t right, we fix it. No paperwork fights, no arguing.
Our Custom Windows & Doors Services in Palm Springs
Custom Shape Windows
Older Palm Springs homes don’t always have rectangular rough openings. Arched openings, octagon frames, and odd trapezoids from the original CBS pour are common, especially in the neighborhoods east of Military Trail. We order custom shape windows sized to the exact opening, built with the same impact-rated laminated glass the FBC requires for this wind-borne debris region. A single custom arch or angle-top unit in Palm Springs typically runs $1,400 to $3,600 installed, depending on size and whether the surrounding block needs repair.
Commercial Storefront Glazing
Congress Avenue and Military Trail have their share of aging storefronts with aluminum framing that’s corroded badly in the Lake Worth Lagoon salt corridor. We replace and rebuild commercial storefront glazing with thermally broken aluminum and impact-rated glass that keeps the space dry and code-compliant. Most Palm Springs storefront jobs run $180 to $420 per linear foot for full frame replacement, and we can usually keep the business operating while the old glass comes out and the new units go in.
Curtain Wall Systems
For larger commercial and multi-story buildings in Palm Springs, we install and service curtain wall systems engineered for wind loads that Florida’s coastal-influenced codes demand. Curtain wall work in this market generally starts around $90 per square foot for a straightforward impact-rated glazing package and climbs based on structural anchoring and drainage design. We coordinate engineering, fabrication, and the permit package so the building owner isn’t juggling three vendors.
Architectural Grilles & SDLs
Palm Springs homeowners who want the look of divided-light windows without sacrificing impact performance ask us about architectural grilles and simulated divided lites (SDLs). We install true SDL bars between the glass panes and exterior grilles matched to the home’s original style, so a 1965 CBS ranch keeps its character while meeting FBC wind-borne debris standards. Interior grilles between the glass add roughly $180 to $400 per window depending on pattern and finish. Exterior aluminum grilles run $120 to $300 per opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We’re an authorized installer for more than a dozen manufacturer lines, which means we can put side by side on paper with actual numbers instead of forcing you into whatever one supplier stocks. For Palm Springs impact applications we quote PGT and CGI regularly because their laminated glass packages hold up to the salt-influenced humidity and the wind-borne debris testing Palm Beach County requires. We keep common hardware, weatherstripping, and sill track parts for these brands on the truck, so most service calls in Palm Springs end with a working window the same visit.
Common Custom Windows & Doors Problems We See in Palm Springs Homes
- Jalousie frames that corrode and seize. Salt-laden humidity from the Lake Worth Lagoon corridor oxidizes the original aluminum louvers until the crank mechanisms bind and the glass won’t close tight. That’s a code failure in a wind-borne debris region, not just a comfort issue.
- Door frames set directly into CBS block. Original doors in 1950s and 1960s Palm Springs homes were often bedded into the block opening with no flashing tape and no capillary break. Moisture wicks through the rough opening, rust eats the jamb from the back, and the rot only becomes visible once the old unit is pulled.
- Hidden framing deficiencies behind old windows. We take out original aluminum windows on a regular basis and find undersized or rotted wood bucks, termite damage, and framing that was never fastened to the block properly. A permit pull triggers correction, which is why we write framing allowances into every Palm Springs estimate before we start.
- Water intrusion around improperly flashed replacement units. Homes that got cheap replacement windows fifteen or twenty years ago often show staining below the sills and along the drywall corners. Palm Springs’s heavy summer downpours push water through the gaps the last installer left behind. We pull the unit, repair the opening, and flash it correctly this time.
Pricing for Custom Windows & Doors in Palm Springs, FL
Here’s what Palm Springs homeowners should expect to pay. A standard impact-rated single-hung replacement in a CBS home runs $900 to $1,800 per opening. Custom shape windows start around $1,400 and climb to $3,600 for large or complex geometry. Full-frame door replacement with impact glazing runs $2,200 to $5,000 depending on side lites and hardware. Architectural grilles and SDL packages add $180 to $400 per unit. What changes the number most is what’s behind the old frame. Rotted bucks, failed flashing, and undersized headers are common in this housing stock, which is why we write a realistic allowance into every quote instead of surprising you with a change order. Call (561) 708-6771 and we’ll come out, measure, and give you a written line-item estimate before you commit to anything.
We Also Serve Cities Near Palm Springs
We run crews into Palm Springs daily, but the same impact-rated window and door work goes into Boynton Beach, South Palm Beach, Golf, and Lantana. Same permits, same Palm Beach County wind-borne debris requirements, same Done Right Promise on every opening.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Palm Springs
You need a permit because Palm Beach County places the village of Palm Springs inside the wind-borne debris region of the Florida Building Code, which means every replaced opening must meet current impact protection standards. Jalousie windows do not, so the village requires a permit pull and inspection for any replacement. We handle the permit application, drawings, and inspection scheduling as part of the job. Call (561) 708-6771 and we’ll walk you through the whole process.
Expect three things: rotted or undersized wood bucks, no flashing tape behind the old frame, and possibly corroded anchor fasteners that snap during removal. The block opening itself is usually fine, but the sill underneath a jalousie bank often has years of water staining and soft wood. We write a framing repair allowance into each Palm Springs Door Installation estimate so those corrections are approved in writing before we touch them, not sprung on you mid-job.
We can come close with a single-hung unit sized to the full opening and dressed with architectural grilles, but no code-approved impact window replicates the look of aluminum louvers exactly. The grille pattern we spec most often for Palm Springs ranchers is a three-over-one SDL layout that echoes the horizontal lines of the old jalousies. You bring us a photo and we’ll show you the closest match from Andersen or Pella before you commit.
Most Palm Springs homeowners see a 15% to 30% reduction in cooling costs after swapping jalousies for insulated impact units, because louvered glass offers almost no thermal barrier and the old frames leak conditioned air constantly. The drop is steeper for homes with east and west exposure along Military Trail corridors. The exact number depends on your AC efficiency and ceiling insulation, but the improvement is immediate once the new units are sealed and flashed.
No. The Florida Building Code allows either impact-rated glazing or an approved shutter system over standard glass, as long as the shutter product carries a Miami-Dade or Florida Product Approval number. That said, most Palm Springs homeowners choose impact glass anyway because shutters require deployment during every storm and impact windows protect the home 365 days a year without any action on your part. We’ll quote both paths so you can compare the actual numbers.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.