Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Ocean Ridge
Custom windows and doors in Ocean Ridge come down to one question: will the product survive two-sided salt air and the town’s Exposure D wind loads? The answer depends on materials, pressure ratings, and how the opening is flashed. TruePane has handled our Door Installation in Ocean Ridge along Old Ocean Boulevard, on the Intracoastal side, and throughout the island for years. Call (561) 708-6771 for a free estimate. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway.
Ocean Ridge is not Boynton Beach. It’s not Lantana. The town sits on a barrier island barely a quarter-mile wide in places. That changes what belongs in your walls and what will fail early. We’ll walk you through it before you spend a dollar.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Custom Windows & Doors Company
We have been called out to Ocean Ridge homes enough times to know the pattern. West-facing sliding glass doors on the Intracoastal side fog almost as fast as oceanfront openings. Original single-pane aluminum windows on 1960s CBS ranches will not pass current Exposure D pressure tests at permit. Homeowners who bought inland-spec Impact Windows & Doors in Ocean Ridge from a big-box retailer sometimes find out at inspection that the design pressure rating was too low. We stop that before it starts.
Our reputation in Ocean Ridge rests on the Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated, before our crew leaves. No paperwork fights. No arguing. Dale Kessler founded Custom Windows & Doors at TruePane on a rule that still governs every install: if the pane is not true, the job is not done.
Background-checked, uniformed technicians handle every job. We answer the phone 24/7 with a live person. We quote fixed pricing upfront and most jobs finish in a single visit. That is the standard we bring to Ocean Ridge.
Our Custom Windows & Doors Services in Ocean Ridge
Custom Shape Windows
Ocean Ridge’s older ranch homes often have unusual rough openings: arched transoms, angled jalousie banks, trapezoid windows over entry doors. Big-box catalogs don’t carry these. We order Ocean Ridge Window Replacement units cut to the exact opening, fabricated with impact-rated laminated glass and marine-grade frames rated to Exposure D pressures. You keep the architectural character. You gain a window that actually closes and seals.
Commercial Storefront Glazing
Ocean Ridge has a small commercial corridor along A1A and a few condo association offices along the Intracoastal. Storefront glazing here takes salt spray from two directions and constant UV. We replace failed storefront systems with thermally broken aluminum and insulated impact glass selected for coastal exposure. We also reglaze existing storefronts when the glass is fogged but the frame is still sound, which saves associations real money.
Curtain Wall Systems
Newer custom builds and some mid-rise condos in Ocean Ridge use curtain wall systems for floor-to-ceiling glass. These systems are unforgiving: a small miscalculation in anchoring, shimming, or expansion joint design causes leaks and fogging within a couple of hurricane seasons. We install curtain wall with stainless steel anchors and butyl-sealed joints, and we check every mullion against the project’s design pressure requirements before ordering glass.
Architectural Grilles & SDLs
Many Ocean Ridge homeowners want the divided-light look on a mid-century ranch or a new coastal build. Simulated divided lites, or SDLs, give you true muntin bars applied inside and outside the glass over a single insulated impact unit. That means the window still meets impact standards and is easy to clean, unlike true divided lites which are harder to seal against salt-driven humidity. We quote SDL configurations from several manufacturers so you see the cost difference on paper.
Oversized Glass Panels
Oversized glass is the single most common request on Ocean Ridge’s newer homes. A 12-foot-wide impact-rated panel facing the Atlantic or the Intracoastal is a serious engineering item. The panel itself weighs hundreds of pounds. The frame must carry it through a Category 5 gust while deflecting within limits that keep the seal intact. We specify the glass thickness, the interlayer, the frame alloy, and the anchoring as a matched system, not a set of parts. That is the difference between a wall of glass that lasts and one that fogs and leaks in four years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
We are an authorized installer for more than a dozen manufacturer lines, and in Ocean Ridge we most often quote for coastal impact work. Andersen’s marine-grade aluminum cladding holds up well against two-sided salt spray. Marvin’s extruded aluminum frames and stainless hardware are a solid choice for Intracoastal-facing sliding doors. Pella’s impact lines offer strong design pressure ratings for larger openings. We quote manufacturer lines side by side on paper, with the same opening, so you see exactly what you are buying and why one costs more than another. You don’t choose from a brochure; you choose from written numbers.
Common Custom Windows & Doors Problems We See in Ocean Ridge Homes
- Fogged insulated glass on west-facing Intracoastal doors. Homeowners assume only oceanfront glass fogs. In Ocean Ridge the island is too narrow to buffer the Intracoastal side. Salt-laden humidity eats the seal, argon leaks out, and the unit fogs permanently. Marine-grade sealants and quality edge seals stop this, but only if they’re specified from the start.
- Binding casement and sliding sashes from corroded hardware. Standard aluminum hardware in salt air pits and swells within five years, especially on the Intracoastal side where homes sit close to the water. Stainless steel rollers, hinges, and handles are a baseline requirement here, not an upgrade.
- Original jalousie and single-pane aluminum windows failing permit review. Mid-century CBS homes in Ocean Ridge often still have their original windows. When a homeowner replaces a roof or does a major remodel, the permit triggers a review, and those windows don’t meet current Palm Beach County impact requirements. The rough openings often need to be modified to accept deeper bucks for impact-rated units.
- Leaks around large glass panels in newer custom homes. Floor-to-ceiling glass looks right until a summer squall drives rain horizontally off the Atlantic. If the flashing, sill pan, and joint design weren’t done for Exposure D conditions, water finds the opening. We re-flash and re-seal these properly with butyl tape and stainless fasteners.
Pricing for Custom Windows & Doors in Ocean Ridge, FL
What you pay in Ocean Ridge tracks the exposure. A standard impact-rated aluminum single-hung in an average opening may run $900 to $1,400 installed. A marine-grade aluminum double-hung sized for an older CBS rough opening typically runs $1,400 to $2,200 per unit once the opening is modified and re-flashed. A large west-facing sliding glass door in stainless hardware and high-DP impact glass often falls between $6,500 and $12,000, depending on width and design pressure rating. Curtain wall and oversized glass panel work is quoted per project; on Ocean Ridge custom builds it commonly runs $150 to $350 per square foot installed, glass, frame, and anchoring included.
The marine-grade version of the same window costs 15% to 30% more than the inland spec. It buys you a frame alloy and hardware that will not pit and bind within a decade. The cheaper spec, installed in Ocean Ridge, often needs hardware replacement or full replacement inside of ten years. We would rather quote the right thing the first time and stand behind it in writing. Call (561) 708-6771 for a free estimate with line-item pricing.
We Also Serve Cities Near Ocean Ridge
Our crews cover Ocean Ridge and the surrounding barrier island and mainland communities, including Custom Windows & Doors in Ocean Ridge, Boynton Beach, South Palm Beach, Golf, and Lantana. If you’re a mile inland in Boynton Beach, your Exposure D requirements may drop, but the salt air does not disappear. We quote every job to the actual street, not the ZIP code’s worst case.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Ocean Ridge
Because the island is too narrow to create a real buffer between the two waterfronts. Ocean Ridge is under a quarter-mile wide in places, so the Atlantic and the Intracoastal both push salt-laden air across every home. West-facing doors and windows on the Intracoastal side see nearly the same salt load as east-facing oceanfront glass. We spec marine-grade frames and stainless hardware on both sides of the strip. Call (561) 708-6771 for an exact quote on your opening; estimates are free.
Yes, in many cases you can keep the original windows if you install code-approved hurricane shutters or panels over them. The Florida Building Code allows shutter-protected openings as an alternative to impact-rated windows. But the shutter route does nothing for the salt corrosion on the frames and hardware, and those jalousie windows will still fog, bind, and leak air. If the windows are original to a 1950s or 1960s CBS home in Ocean Ridge, you will likely replace them eventually anyway. We can quote both paths: impact-rated replacement now, or shutters now and a window plan later. Call (561) 708-6771 to schedule a free estimate.
Exposure Category D means the building is in open, unobstructed terrain directly exposed to wind off a large body of water, so the windows and doors must be tested and approved for higher positive and negative design pressures than inland openings. In Ocean Ridge, virtually every structure falls into Exposure D because the town is a narrow barrier island. That directly affects product selection: a window rated for Boynton Beach may not pass permit review in Ocean Ridge. We check the design pressure rating on every quote against your specific opening and the current code before you order anything. For specifics on your home, call (561) 708-6771.
Marine-grade window packages in Ocean Ridge typically run 15% to 30% more than the inland-spec version of the same size and style, because the frames use a higher-grade aluminum alloy or cladding, the hardware is stainless steel instead of plated steel, and the sealants are formulated for continuous salt exposure. On a standard opening, that’s often $200 to $500 more per unit. Over ten years, the inland-spec version in Ocean Ridge usually needs hardware replacement or full replacement, which costs more than the marine-grade upgrade would have. In this town, the cheaper spec becomes the expensive one. Call (561) 708-6771 for a written line-item quote so you can see the actual numbers for your opening.
If the fog is on the outside of the glass and wipes away with your hand, it’s condensation from warm humid air hitting cooler glass, and the window is doing its job. If the fog is between the two panes of glass, cannot be wiped, and does not clear on a dry day, the seal has failed and the insulating gas has leaked out. In Ocean Ridge, failed seals are common on west-facing Intracoastal doors and on any unit that was not built for constant salt-laden humidity. Once the seal is gone, the window’s energy performance is gone and replacement glass is the fix. Call (561) 708-6771 and we will tell you which one you’re looking at; the assessment is part of a free estimate.
Call TruePane Windows & Doors for Custom Windows & Doors in Ocean Ridge
We have been repairing and replacing the windows and doors that real people live with in Ocean Ridge long enough to know what fails here and what does not. The salt air off the Atlantic and the Intracoastal decides the materials. The town’s Exposure D code decides the pressure ratings. We handle both so you don’t have to think about either. Call (561) 708-6771 for a free estimate. A live person answers. We will measure your openings, quote the right marine-grade products in writing, and register both warranty layers before the truck leaves your driveway. If it is not done right, we make it right. That is the deal, in writing, for every Ocean Ridge job we take on.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge and surrounding communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.