Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Ocean Ridge
Door installation in Ocean Ridge isn’t a generic job you can quote off a price sheet from Delray or Boynton. This town sits on a barrier island less than a quarter-mile wide in places, with the Atlantic on one side and the Intracoastal on the other. That means every exterior door here has to meet Florida Building Code Exposure Category D wind-load ratings, a spec most door companies don’t stock and many don’t fully understand. TruePane has been installing Impact Windows & Doors - Ocean Ridge and marine-grade doors in coastal Palm Beach County for years, and we know what Ocean Ridge’s building department is going to check. Call (561) 708-6771 and we’ll send a technician who measures twice and quotes the right product the first time.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Door Installation Company
We’re not the cheapest bid in Ocean Ridge, and we don’t try to be. We’re the company homeowners call after a cheaper door install fails a plan review or starts corroding at the hinges three years in. Our crew has worked on homes from the oceanfront stretch of A1A to the west lots along the Intracoastal, and we understand that a door on the east side of the island and a door on the west side face nearly identical salt and wind exposure here. That’s not true in Boca, and it’s not true in Lake Worth. In Ocean Ridge, it’s the reality of building on a sandbar.
Every TruePane job is covered by the Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated, before our truck leaves your driveway. We hire background-checked, uniformed technicians who work in your home the way they’d work in their own mother’s. And a live person answers the phone 24 hours a day, 7 days a week at (561) 708-6771. Not a call center. Not a voicemail tree.
Our Door Installation Services in Ocean Ridge
Our Door Installation team handles everything from a single entry door to a full set of custom impact sliders. Here’s what we install most often in Ocean Ridge.
Entry & Swing Doors
A front door in Ocean Ridge has to do two jobs at once: look right on a luxury home and hold up to a Category D design pressure rating, which is why we also offer Energy-Efficient Windows - Ocean Ridge for the full opening. We quote manufacturers side by side on paper so you see exactly what you’re paying for. Most entry door installs in town run $1,800-$4,200 depending on material, glass package, and whether the existing rough opening needs a deeper buck added to meet current code.
Double & French Doors
French doors facing the Intracoastal in neighborhoods like Country Club Shores take a beating from west winds that pick up speed across open water. We specify marine-grade hinges and stainless hardware as standard, not as an add-on. A double French door replacement in Ocean Ridge typically runs $3,200-$6,800 installed, including the reinforced buck work older CBS homes usually need.
Bifold & Folding Doors
Sliding & Patio Doors - Ocean Ridge and folding glass doors are popular on the newer custom builds along A1A and the oceanfront. They’re also the most demanding product to install correctly in an Exposure D zone. Track alignment, header load, and flashing detail all have to be right or the door will bind and leak. TruePane has installed bifold systems from PGT and Jeld-Wen in Ocean Ridge for years, and we pull the permit and meet the inspector on site so you don’t have to take a day off work.
Pivot Doors
A pivot door on a beachside home is a statement piece, but it’s also a wind-load liability if the hinge system isn’t engineered for uplift and negative pressure. We don’t install pivot doors in Ocean Ridge without verifying the header capacity and specifying hardware rated for the actual design pressure of your specific lot. Expect $4,500-$9,000 for a properly installed impact-rated pivot unit, depending on size and finish. If a bid comes in well under that, ask them to show you the design pressure calculation. Then call us.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
TruePane is an authorized installer for more than a dozen manufacturer lines, including PGT, Ply Gem. We keep local inventory and parts access for Ocean Ridge customers, which means a warranty service call doesn’t turn into a three-week wait. When you sit down with our technician, you’ll see quotes for the lines that actually match your home’s exposure requirements, side by side, with the design pressure ratings printed on the page. We don’t sell you just one brand we happen to carry. We show you what fits and let you choose.
Common Door Installation Problems We See in Ocean Ridge Homes
- Coastal corrosion on Intracoastal-side doors. Homeowners expect the oceanfront door to corrode. They don’t expect the west-facing slider to fail just as fast. But Ocean Ridge is so narrow that salt spray travels clear across the island, and we regularly replace west-side hardware that’s pitted and seized within five years. Marine-grade stainless is a baseline requirement here, not an upgrade.
- Undersized frames in original 1950s-1970s rough openings. The mid-century concrete-block ranch homes in Ocean Ridge were built for thin aluminum door frames. Modern impact units need a deeper buck to sit properly in the wall. Skip that step and the jamb distorts under negative wind load, the seals fail, and the door stops closing square. We see it all the time on retrofits that charged less upfront.
- Design pressure mismatches at plan review. A door tagged as “impact-rated” at a Palm Beach County supply house may not carry the Exposure D rating Ocean Ridge requires. If the product approval doesn’t match the zone, the plan review kicks it back or the inspector fails it in the field. We check the rating before we order anything.
- Flashing failures on east- and west-facing exposures. Wind-driven rain hits both sides of this island. A door that’s flashed for a standard inland installation will leak in Ocean Ridge. We use flashing tape and sill details rated for high-wind coastal exposure on every opening, and we document it with photos before the trim goes up.
Pricing for Door Installation in Ocean Ridge, FL
Here’s what we actually see in Ocean Ridge, not a generic Palm Beach County range. A standard single entry door install runs $1,800-$4,200. French or double door replacement runs $3,200-$6,800. A bifold folding door system starts around $6,000 and goes up from there, depending on panel count and glass package. Pivot doors run $4,500-$9,000. Storm doors are the entry point at $600-$1,400 installed. The variance comes from rough opening condition, design pressure requirements, glass upgrades, and whether we’re pulling a permit and meeting an inspector. Every quote we give is a fixed, line-item price in writing. No change orders, no surprise add-ons. Call (561) 708-6771 to schedule a free estimate. For the broader market, see Door Installation in Ocean Ridge on our city page.
We Also Serve Cities Near Ocean Ridge
TruePane works throughout the coastal corridor. Along with Ocean Ridge, we serve Ocean Ridge neighbors in Boynton Beach, South Palm Beach, Golf, and Lantana. Each town has its own building department and its own exposure quirks, but the same crew and the same standards apply. If you’re on the barrier island or just inland, the phone number is the same: (561) 708-6771.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Ocean Ridge
Yes. Ocean Ridge falls under Florida Building Code Exposure Category D because the town sits on a narrow barrier island with open water on both sides. Doors here must meet higher positive and negative design pressure ratings than what’s typically stocked for inland Boynton Beach projects. A door that passes in Boynton may still fail plan review in Ocean Ridge if its product approval doesn’t list the higher rating. Call (561) 708-6771 and we’ll check your specific lot’s requirements before you spend a dollar on product.
A compliant quote should state the product’s design pressure rating, the manufacturer’s product approval number, and confirmation that the rating meets or exceeds Ocean Ridge’s Exposure D requirement. It should also itemize the buck work or rough-opening modification needed to seat the deeper impact frame. If a quote doesn’t list the design pressure number on the page, it’s likely not a compliant quote. We include it on every bid.
Why do west-facing Intracoastal-side doors corrode as fast as oceanfront doors in Ocean Ridge?
Because the island is too narrow to provide any wind or salt buffer between the two waterfronts. At less than a quarter-mile wide in places, Ocean Ridge lets salt-laden wind cross from the Atlantic side all the way to the Intracoastal stretch, so the west-facing exposure gets nearly the same corrosive load as the oceanfront. We specify marine-grade hardware on both sides of the island as standard. Call (561) 708-6771 if you’re seeing pitting or rust on your Intracoastal-side door.
After installation, the town inspector will verify that the door and frame match the approved plans, that the product approval documentation is on site, and that the anchoring and flashing details match the wind-load requirements for Exposure D. If any part of the rough opening work wasn’t permitted, the inspector can flag it. TruePane pulls the permit and meets the inspector on site, and we keep the documentation in writing so you have it for insurance records. Call (561) 708-6771 to walk through what your specific project will need.
In many cases, yes. Insurers in Ocean Ridge look for documented impact-rated openings, and having the right design pressure rating on paper is part of what they evaluate. We provide written documentation of the product approvals and installation details so you can submit them with your wind mitigation form. It’s not a guarantee of a discount, but it’s the documentation an insurer wants to see. Call (561) 708-6771 and we’ll explain exactly what paperwork you’ll receive.
Call TruePane for Door Installation in Ocean Ridge
If your door binds in July, leaks in a squall, or won’t pass a wind-mitigation review, we’re the call to make. TruePane has been installing doors in coastal South Florida since 2008, and Dale Kessler’s founding rule still runs the place: if the pane is not true, the job is not done. We stand behind every install with the Done Right Promise and The Keystone Standard, both warranty layers registered in writing before the truck leaves your driveway. A live person answers the phone 24/7. Call (561) 708-6771 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Dale has spent years installing and servicing windows and doors across South Florida’s coastal communities, and he still checks the design pressure ratings on every Ocean Ridge quote himself.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.