Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Royal Palm Beach
Impact window and door replacement in Royal Palm Beach runs $1,100 to $3,800 per opening for most homes, with full-house projects on 1980s CBS construction typically landing between $18,000 and $45,000. The schedule follows lead times, not labor, on higher-end lines like PGT and Simonton. If you live in a Royal Palm Beach home built between 1978 and 1995, you’re likely sitting on original single-pane aluminum windows that no longer pass wind-mitigation inspection and are pushing your property insurance premium up every year. TruePane Windows & Doors has worked these block-and-stucco houses long enough to know what’s behind the trim before we pull it. Call (561) 708-6771 and we’ll schedule a free estimate with a written line-item quote.
Why TruePane Windows & Doors Is Royal Palm Beach’s Preferred Impact Windows & Doors Company
We didn’t build our reputation in Royal Palm Beach by rushing jobs. We built it by showing up on time, measuring every opening twice, and registering both manufacturer warranty layers before the truck leaves the driveway. Homeowners on streets like Crestwood Boulevard, La Mancha Avenue, and throughout the 33411 and 33414 ZIP codes have seen our crews patch spalled concrete behind old window anchors, set fusion-welded frames square, and then come back when the inspector needed something clarified. Dale Kessler founded this company in 2008 on a rule that still governs every install: if the pane is not true, the job is not done.
Our Impact Windows & Doors work in Royal Palm Beach carries The Keystone Standard. That means both warranty layers registered in writing, durations stated, before we leave the property. It means a Done Right Promise that does not ask you to file paperwork or argue your case. And it means a live person picks up the phone whenever you call, because a company that plans to be here in thirty years does not hide behind a voicemail tree.
Our Impact Windows & Doors Services in Royal Palm Beach
Hurricane Impact Windows
Most Royal Palm Beach homes from the 1978 to 1995 build-out still have their original single-pane aluminum single-hungs and sliders. These units were never impact-rated. They were set directly into block bucks with minimal sealant, and after four decades of humidity, the concrete around the anchors has often spalled. We remove them, patch and cure the block, and install fusion-welded impact-rated replacements sized to the opening. In the Crestwood neighborhood, a 1983 CBS home gave us exactly this problem. Anchors were loose in rotted-out pockets, and the inspector flagged it before we even set the first new frame. We patched, cured for the required time, then installed low-E argon-filled casements that brought the house into wind-mitigation compliance and cut the owner’s insurance premium.
Wind Mitigation & Code Compliance
Royal Palm Beach sits roughly 15 miles inland, but the Florida Building Code still puts the village in a design wind-speed corridor of approximately 140 mph Vult. Inland homeowners routinely underestimate this because they associate impact glass with beachfront condos. A wind-mitigation inspection looks at every opening, and pre-code windows or unrated doors will fail it. We handle the correction side honestly. This means replacing what must be replaced, documenting code compliance with the village’s building department, and telling you plainly if a shutter system handles a secondary opening cheaper than a full impact window.
Impact Entry & French Doors
The original fiberglass and hollow-core entry doors on Royal Palm Beach’s 1980s stock fail Florida Product Approval wind-load tests outright. Thresholds rot where afternoon thunderstorms drive water against the south-facing entries. We replace them with impact-rated doors set on properly flashed sills, shot into cured block after we’ve confirmed the anchor zones are sound. French door retrofits are common on homes off Royal Palm Beach Boulevard where owners want the light but still need the rating. We coordinate with the manufacturer on lead time first, because custom sizes on PGT or Simonton lines set the calendar long before the installation date.
Impact Garage Doors
A garage door is the largest opening in a Royal Palm Beach home, and on most pre-1994 houses the original door is not wind-load rated. When a storm comes through western Palm Beach County, garage door failure pressurizes the house and blows out windows from the inside. We survey the door and the surrounding framing, then price either a full impact-rated replacement or a bracing retrofit depending on what the wind-mitigation report actually requires. The difference matters to your premium, and we put both options on paper so you can see it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Royal Palm Beach
We’re an authorized installer for more than a dozen manufacturer lines, and for Royal Palm Beach customers we keep PGT, Simonton, and Jeld-Wen at the front of the quote sheet because these models match the thermal and code requirements of inland Palm Beach County CBS homes. When a homeowner wants a side-by-side comparison, we put the actual manufacturer specs and warranty durations on paper next to each other. There’s no brand-agnostic talk. You see what each unit costs, what it’s rated for, and how long the warranty runs before you sign anything.
Common Impact Windows & Doors Problems We See in Royal Palm Beach Homes
- Oxidized aluminum frames and binding sashes. Afternoon thunderstorms and high humidity attack 1980s aluminum at the jamb first. The frame swells and the sash binds, then the seal fails and the glass fogs. This is not a temporary sticking door. It’s the frame giving out.
- Concrete spalling behind old window anchors. Windows set directly into block bucks without back-bedding let humidity wick behind the frame for decades. The anchors sit in degradated concrete that won’t hold new impact windows at required pullout strength until patched and cured.
- Rotting entry door thresholds. South and west-facing doors catch the full force of Royal Palm Beach’s storm cycle. Fiberglass and hollow-core doors from the original build warp at the jamb and rot at the sill. They fail wind-load testing during insurance inspections.
- No flashing tape or sill pan on original openings. Pre-code homes rarely had modern flashing details. Water that gets past an old window tracks down the block wall and into the footer. On a replacement, we remove the old frame, inspect the rough opening, and install proper flashing before the new impact unit goes in.
Pricing for Impact Windows & Doors in Royal Palm Beach, FL
A single impact window replacement in Royal Palm Beach typically runs $1,100 to $3,800 depending on size, frame material, and whether we’re patching block behind the anchors. Impact sliding glass doors range from $4,500 to $9,000 installed. Entry and French doors average $3,500 to $7,500, and an impact-rated garage door lands between $2,800 and $6,000. A full-house retrofit on a 1980s CBS home in the village commonly falls between $18,000 and $45,000. The two things that move the number most here are whether hidden spalling requires block repair and what the lead time is on your chosen manufacturer line. We price the job in writing before ordering, and we don’t change that number after the work starts. Call (561) 708-6771 for a free estimate.
We Also Serve Cities Near Royal Palm Beach
Our crews cover Royal Palm Beach every week, and we take the same measured, documentation-first approach in Wellington, Greenacres, West Palm Beach, and Palm Beach. See the full scope of our Royal Palm Beach coverage area to confirm we’re nearby.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Royal Palm Beach
The pre-code block construction adds a hidden cost layer that newer homes don’t carry. On 1978 to 1995 CBS houses, original aluminum windows were often set directly into block bucks with no back-bedding, and decades of humidity have spalled the concrete around the anchors. That block work must be patched and cured before the new impact window can achieve the pullout strength required for inspection. Expect $150 to $400 per opening in block repair on homes built before 1994. Call (561) 708-6771 and we’ll tell you what your specific openings actually need.
Yes, in most cases it will, and the reason is specific to this village’s pre-code housing stock. Insurers write inland Palm Beach County policies based on wind-mitigation inspection results, and a house with impact-rated openings plus proper anchoring documentation earns credits that can reduce the wind portion of the premium materially. We provide the paperwork your carrier needs, including the product approval numbers and the installation photos. The exact credit depends on your carrier and your home’s full mitigation profile.
The original windows on pre-1994 CBS homes had no flashing, and that’s precisely why we find water damage behind them. Impact windows are set with a different anchoring method that creates new moisture pathways if the rough opening isn’t properly flashed and sealed. Flashing tape at the jambs and head directs water away from the block and prevents the exact spalling problem that plagues 1980s installs. The building department in Royal Palm Beach expects to see it, and so do we.
Look for a permanent etched mark in the corner of the glass, typically with a code and the manufacturer’s name, or a label on the frame showing a Florida Product Approval number. If you find neither, the windows are almost certainly not impact-rated. On original single-pane aluminum units from the 1978 to 1995 build-out, there is no ambiguity. They predate the rating system entirely. We can inspect the openings and tell you exactly what you have, and we’ll do it during a free estimate call.
Lead time. Labor we control. Manufacturer lead times on lines like PGT, Simonton, and Jeld-Wen run anywhere from four to fourteen weeks depending on the line, the glass package, and the size of the order. Custom sizes on French doors and large sliding units push toward the long end of that range. The honest schedule is set the day we submit the order, and we build a written timeline so you know when the truck hits your driveway. Call (561) 708-6771 for a real number on your specific project.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Royal Palm Beach through four decades of glasswork and code-correction on the village’s pre-1994 housing stock.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.