Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Golf
Door installation in Golf, FL typically runs $1,800 to $9,500 depending on the door type, size, and whether impact-rated glass is required, and most single-door jobs are completed in one day. But Golf is not a typical market. Every address here sits inside the Palm Beach Country Club loop, which means your doors answer to two masters: Palm Beach County’s wind-borne debris code and the very real daily hazard of an errant golf ball. TruePane has been setting doors in this enclave long enough to know what both demand. Call (561) 708-6771 and we’ll walk you through exactly what your opening needs.
Why TruePane Windows & Doors Is Golf’s Preferred Door Installation Company
We’re a second-generation glazier’s company, founded by Dale Kessler, and we’ve built our name on one rule: if the pane is not true, the job is not done. That standard matters more in Golf than almost anywhere else we work, because the homes here don’t accept stock anything. Most were built mid-century, then renovated into custom estates with oversized entry systems, arched openings, and millwork you won’t find in a catalog. Measuring an opening twice before ordering isn’t a slogan with us. It’s the only way to make sure a $6,000 custom pivot door doesn’t arrive with a half-inch gap at the threshold.
We know Golf’s permitting path runs through Palm Beach County rather than a municipal office, and we know the inspectors check Florida Product Approval against the county’s own wind-speed contour maps, not Miami-Dade’s. We’ve seen contractors stumble on that difference and leave a homeowner with an open hole and a stalled inspection. We don’t let that happen. Background-checked, uniformed technicians do the work. A live person answers our phone 24 hours a day. And every job carries our Done Right Promise in writing, with both manufacturer warranty layers registered before the truck leaves your driveway.
Our Door Installation Services in Golf
We handle the full range of Door Installation work, but the doors Golf homeowners actually ask for tend to cluster around a few tough configurations. Here’s what we set most often in this village.
Double & French Doors
Double French doors account for more of our Golf jobs than any other single category, and the reason is simple: these homes are built for light and fairway views. But a double door opening is twice as many chances for air to leak and salt-air humidity to work its way into the jamb. In Golf, we insist on impact-rated insulated glass for any French door facing the course, and we pre-check the threshold grading so water never pools at the saddle. Expect to budget $3,200 to $8,500 for a quality impact-rated double French installation, more if the opening needs reframing.

Pivot Doors
Golf’s larger custom homes favor pivot doors, the oversized, hinge-free entry systems that make a statement but punish sloppy installation. A pivot door off by a quarter degree will bind in July when the humidity swells the frame. We set these with laser alignment and allow for seasonal movement upfront, because the last thing a Golf homeowner needs is a $7,000 door that won’t close smoothly by August. Typical pivot door installations here run $4,500 to $12,000 depending on size and finish.

Arched & Custom Doors
Many Golf homes still carry their original arched entryways from the mid-century build or a later Mediterranean remodel. You don’t special-order an arched door off a stock sheet; you template the radius, match the millwork, and fabricate to the opening. That’s the work we love doing, and it’s the work that separates a craft shop from a parts-chaser. Custom arched door jobs in Golf generally start around $2,800 and climb based on material and glazing. Dale Kessler’s standard on these is uncompromising: template twice, cut once, set true.

Entry & Swing Doors
Standard entry and swing doors still make up a healthy share of our Golf work, particularly on service entries, garages, and rear doors away from the fairway exposure. But even a “simple” front entry here deserves more than a hollow-core swap. We quote wood, fiberglass, and steel side by side on paper so you see what you’re buying. A straightforward entry door replacement in Golf runs $1,800 to $4,200 installed, including hardware and weatherseal replacement. Septic and well setbacks occasionally dictate where an entry can move, and we pre-scope that before ordering so you don’t end up with a permit denial.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Golf
We are an authorized installer for more than a dozen manufacturer lines, and in Golf we most often specify, chosen for their impact-rated product approvals and coastal-rated finishes. We stock common hardware and weatherstripping parts for all three lines so a warranty part or a worn seal doesn’t leave you waiting on a regional warehouse. When we quote, we put the options side by side on paper, with both warranty layers registered in writing, so you know exactly what each door costs and what stands behind it.
Common Door Installation Problems We See in Golf Homes
Golf’s combination of coastal air, county permitting, and oversized custom openings creates a specific set of failure patterns we’ve learned to spot before they become expensive problems.
- Wrong product approval paperwork: We regularly meet Golf homeowners whose previous contractor spec’d doors to Miami-Dade HVHZ standards assuming that met or beat Palm Beach County’s requirement. It doesn’t. County inspectors verify to their own wind-speed contour maps, and mismatched documentation stalls the inspection. We pull the county permit and confirm wind-speed map compliance before ordering.
- Salt-air hardware corrosion: The Atlantic is close enough that exposed aluminum frames and cheap hardware corrode noticeably faster in Golf than even 10 miles west. We’ve pulled hinges and seals off doors less than 5 years old that looked 20. Our hardware selection process favors 316 stainless and coastal-rated finishes, and we seal jambs with flashing tape so moisture isn’t wicked into the rough opening.
- Sepic and well setback violations: Golf is unincorporated, and many homes here run on septic systems and private wells. Swapping or relocating an entry door can run afoul of setback rules requiring a minimum distance from the drainfield or wellhead. We check the plat and scope the setback before we quote, so the permit application doesn’t get bounced on a technicality.
- Pooling water at the threshold: Open-lot grading on Golf’s larger properties often channels runoff toward the house after heavy rain. If the soil doesn’t slope away from the door, water sits at the saddle and rots the subfloor. Before we set any exterior door, we confirm drainage and correct the grade with a swale or threshold pan where needed.
Pricing for Door Installation in Golf, FL
Here’s what Golf homeowners can expect to budget for door work with TruePane, based on the jobs we’ve completed in this village over the last several years. These are installed prices including materials, hardware, weatherseal, and the county permit.
- Entry & Swing Door replacement: $1,800 to $4,200
- Double & French Doors (impact-rated): $3,200 to $8,500
- Pivot Door installation: $4,500 to $12,000
- Arched or fully custom door: $2,800 and up, depending on material and glazing
Custom millwork, oversized openings, and complex grading corrections can push the high end of these ranges. We quote a fixed price before any work starts, with no change orders unless you add scope. Call (561) 708-6771 for a free estimate at your Golf home, and we’ll put the numbers on paper so you can compare what you’re buying.
We Also Serve Cities Near Golf
TruePane’s crews work throughout Golf and the surrounding Palm Beach County coast, including Boynton Beach, South Palm Beach, Lantana, and Manalapan. If you’re in one of those communities and dealing with a sagging entry, a corroded French door, or a golf-ball cracked sidelight, call (561) 708-6771 and we’ll schedule a measure. We bring the same county permit knowledge and coastal hardware discipline to every job, no matter the address.
Serving Golf, FL - Our Local Coverage Area
We’re based in the Golf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Golf
Palm Beach County inspectors verify Florida Product Approval against the county’s own wind-speed contour maps, which differ from Miami-Dade’s HVHZ standards. A door spec’d only to Miami-Dade may pass its own zone but fail the county’s documentation check, stalling your inspection on one of Golf’s very few addresses. We always confirm the correct county approval before ordering.
Any door relocation, or even a jamb expansion that changes the footprint of the opening, must maintain minimum distances from your septic drainfield and wellhead under Palm Beach County code. We check your survey and scope the setback before quoting, so you don’t pay for a door that the county won’t permit. Call (561) 708-6771 and we’ll review your plat as part of the free estimate.
Yes. Impact-rated laminated glass is designed to withstand a 9-pound 2×4 fired at 34 miles per hour, which far exceeds the energy of a struck golf ball. While no manufacturer labels glass specifically as “golf-ball proof,” the laminated interlayer absorbs and disperses impact without shattering, making these doors the right call for any fairway-facing opening. For Golf homes, we recommend impact-rated French doors regardless of code, because the course is the reality.
316 marine-grade stainless steel is the most durable finish for Golf’s coastal exposure. Standard brass and zinc hardware that holds up fine in West Palm Beach will pit and bind within a few seasons of salt-air humidity here. Powder-coated finishes in a lifetime marine-grade formulation also perform well, and we specify both as standard on exterior doors in this village. The difference in cost is modest; the difference in how the hardware looks in year eight is not.
You need to verify drainage before installation, because the county inspector will check that surface water is directed away from the doorway, but a formal engineering plan is only required when you’re changing lot grading or adding substantial hardscape. In practice, we pre-check the slope at every exterior door we set in Golf, and if the existing grade drains back toward the threshold, we correct it as part of the installation. Call (561) 708-6771 and we’ll assess your specific site during the free estimate.
Ready to get a real number for your door? Call (561) 708-6771. We’ll measure, quote, and put The Keystone Standard on paper before you sign anything.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Golf and the surrounding Palm Beach County coast. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After