French & Double Doors

French & Double Doors in Boynton Beach, FL | TruePane Windows & Doors

French and double doors bring something no sliding panel can: a true open-wall moment. Two full-height doors that swing wide, or one active leaf with a fixed mate, both carrying impact-rated laminated glass in every lite. In Boynton Beach, where building codes treat every window and door opening as part of the wind-load system, this product has to do two jobs at once. It needs to look light and elegant on a calm afternoon, and it needs to hold its frame when a named storm pushes against it. TruePane Windows & Doors has installed impact French and double doors throughout Boynton Beach for years, across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. Call (561) 708-6771 to talk through your opening.

Call (561) 708-6771

Product Overview - French & Double Doors

French doors in Florida are not a cosmetic choice first. They are a structural decision that happens to be beautiful. The paired impact-rated configuration uses laminated glass in every single lite, so there is no weak pane in the assembly. Symmetrical sightlines mean the left and right doors read as mirrors of each other, which matters on rear elevations, patio transitions, and any opening where the door is the focal point of a room. Multi-point locking hardware ties the active panel to the frame at the top, bottom, and center, so the door is not relying on a single latch point when wind pressure bears against it.

In Boynton Beach homes, these doors typically connect a living room, dining room, or primary suite to a covered lanai, pool deck, or garden. The frame materials we specify are aluminum or vinyl. Aluminum gives us the narrowest sightlines and the most rigid frame for wide openings. Vinyl offers excellent thermal performance and a softer cost profile for standard residential openings. Both are paired with impact glass packages that carry Miami-Dade NOA and Florida Product Approval documentation per configuration. We measure every opening before the order is placed, because a French door system that is even a quarter-inch out of square will fight you for the life of the house. TruePane Windows & Doors installs these doors level, plumb, and square, with the perimeter sealed per AAMA 812 practice.

Technical Specifications

Here is what you are actually specifying when you choose French and double doors through TruePane Windows & Doors in Boynton Beach:

• Frame materials: Aluminum or vinyl, selected for the opening size and wind zone
• Maximum size: Up to 96 inches wide across the paired assembly
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Finish options: White, almond, bronze, black, tan
• Hardware: Multi-point locking system on the active leaf
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration
• Design pressure: Matched to your wind zone, up to +/-100, never higher

We do not pad the spec sheet with features you cannot actually order. Every glass option above is a real, quotable configuration. If you want tinted Low-E laminated glass in a bronze frame, we can price that exactly. Call (561) 708-6771 and we will build the spec with you.

Hurricane & Compliance Performance

These doors are not marketed as storm-rated. They are engineered and documented as storm-rated, which is a different thing. Here is what that means in plain terms.

Laminated Impact Glass - Every lite carries a PVB (polyvinyl butyral) interlayer. When impact occurs, the glass may crack, but the interlayer holds the fragments bonded in the frame. The opening stays sealed. That is the entire point of an impact system: the building envelope does not breach.

Miami-Dade NOA / FL Product Approval - Each configuration has its own Notice of Acceptance or Florida Product Approval number. You cannot take a number from one width and apply it to another. We verify the exact documentation against your specific quote before the permit package goes in.

FBC / HVHZ Compliance - The doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Boynton Beach sits inside the HVHZ. That means the product has to meet a stricter rule set than most of the country ever deals with.

TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under a family of protocols: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. When someone says a door is Miami-Dade approved, this is the testing family behind the number.

Design Pressure for Your Wind Zone - We match design pressure to your specific wind zone, up to +/-100, never higher. There is no reason to pay for a DP rating your home does not require, and no reason to underspec one it does. The engineering determines the number. We order to the engineering.

Energy Performance - Low-E insulated glass options are available for these doors. If the opening faces west in Boynton Beach, afternoon heat load is a real consideration. Low-E coatings and insulated construction reduce solar heat gain without changing the door’s impact capability.

Color & Glass Options

Boynton Beach architecture runs from 1970s ranch to new coastal-contemporary. The finish palette on these doors covers that range. White is the default for a reason: it stays cool to the touch, hides salt haze better than dark finishes, and reads classic on stucco. Almond and tan warm up older facades and pair well with terracotta or wood tones. Bronze and black are the strongest contrast choices, and they show palm shadows beautifully on a lanai wall, though they do absorb more afternoon heat. We will tell you that honestly before you order.

Glass selection follows the room, not the door. Clear laminated impact glass is the standard for maximum visible light transmission. Tinted glass helps on direct-sun exposures where glare is a daily issue. Low-E insulated glass is the upgrade for energy performance, and it is available in combination with the impact interlayer. If you want a specific glass package, we will spec it precisely and show you the product approval documentation for that exact build. Call (561) 708-6771 to walk through glass samples at your Boynton Beach home.

Installation by TruePane Windows & Doors in Boynton Beach

An impact-rated French door is only as good as its installation. The NOA number applies to the manufactured assembly. The moment it is set into a rough opening, the installer becomes the quality control. We treat it that way.

Every installation starts with a pre-install inspection. We check the rough opening for square, level, and plumb before the door ever comes off the truck. Warped framing or an out-of-level sill gets corrected first, because no door can be shimmed into compliance with an impact rating. We set the frame level, plumb, and square, then secure it to the structure per the approved anchoring schedule for your wind zone. The perimeter gets sealed with AAMA 812 low-expansion foam, which fills the gap without distorting the frame. Flashing and sealant follow, then a final water test on the sill and threshold.

Our installation practice follows AAMA 2400 and 2410 standards for fenestration installation. That matters in Boynton Beach, where coastal exposure means wind-driven rain is normal, not rare. We also know the local permitting rhythm. Palm Beach County and the City of Boynton Beach both require product approval documentation as part of the permit package for impact doors. We provide the NOA and Florida Product Approval numbers for your exact configuration so the permit review does not stall. Improper installation compromises the rated system. We install these doors the way the engineering assumes they will be installed.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Boynton Beach

If you are planning a French or double door installation in Boynton Beach, start with a measurement and a real quote. We will visit the site, check the opening, confirm your wind zone, and price the exact configuration with the product approval documentation to match. Call (561) 708-6771 to schedule your free on-site measurement and project quote.

Written by the team at TruePane Windows & Doors, serving Boynton Beach and surrounding Palm Beach County communities with impact-rated window and door installations.