Awning Windows

Awning Windows in Boynton Beach, FL | TruePane Windows & Doors

Awning windows give Florida homeowners something rare: ventilation while it’s raining. They’re top-hinged and crank outward from the bottom, so the sash itself acts like a small roof over the opening. In Boynton Beach, where afternoon storms roll through from May to October, that’s a practical advantage. TruePane Windows & Doors installs impact-rated awning windows across Boynton Beach, Ocean Ridge, Hypoluxo, and the surrounding coastal communities. We carry PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and every awning window we sell is engineered for the Florida Building Code’s High-Velocity Hurricane Zone requirements. Call (561) 708-6771 to talk about your project.

Call (561) 708-6771

Product Overview - Awning Windows

An awning window is a top-hinged, crank-out impact window that sheds rain while cracked open for ventilation. The laminated impact glass sits in a weathertight frame, and because the hinge is at the top, the sash naturally deflects water away from the opening when it’s partially open. You can leave an awning window cracked during a summer downpour and not worry about water pooling on the sill. That’s the single biggest reason Boynton Beach homeowners choose this profile over a traditional single hung.

Architecturally, awning windows work well in places where other window styles struggle. They’re common above kitchen sinks, in bathrooms, along stairwells, and in wide-but-short wall openings where a tall casement wouldn’t make sense. You also see them paired with picture windows, where the fixed glass provides the view and the awning unit handles airflow. Because the crank mechanism pulls the sash tight against the frame when closed, awning windows seal well against wind-driven rain, which matters a lot in coastal Palm Beach County.

The frame materials we offer, aluminum and vinyl, each have a role in Florida construction. Aluminum frames provide a narrow sightline and excellent structural rigidity, which is why they’re common in modern and mid-century homes along the Intracoastal. Vinyl frames carry strong thermal performance and resist the salt-air corrosion we deal with in Boynton Beach. Both are paired with laminated impact glass and stainless-steel hardware that won’t seize up in humid conditions.

Technical Specifications

Here’s what you’re actually choosing from when you spec an awning window with TruePane Windows & Doors:

• Frame materials: Aluminum or vinyl, depending on the look and thermal performance you want.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass.
• Finish colors: White, almond, bronze, black, and tan across our lines.
• Screen options: Fixed screen or retractable screen, both removable for cleaning.
• Operation: Crank-out hardware with multi-point locking along the sill.
• Design pressure: Matched to your wind zone, up to +/-100. We don’t oversell rating you don’t need, and we don’t under-spec your home.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to FBC HVHZ requirements.

Exact sizes vary by manufacturer and product line. We’ll confirm maximum dimensions and hardware configurations during the quote process so you’re not guessing.

Hurricane & Compliance Performance

Laminated Impact Glass - The glass construction is two panes bonded with a PVB (polyvinyl butyral) interlayer. When debris hits the window, the glass may crack but the interlayer holds the fragments in the frame. That means no flying shards, no breach in the building envelope, and no pressure spike inside your home during a storm.

Miami-Dade NOA / Florida Product Approval - Every awning window configuration we install carries a Miami-Dade Notice of Acceptance or Florida Product Approval number. These are issued per configuration, not per product line, so the exact number depends on your size, glass package, and frame choice. We’ll list the applicable numbers on your quote and permit submittal. Verify them on your specific configuration before you buy.

FBC / HVHZ Compliance - These windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the strictest wind-borne debris region in the state, and Boynton Beach falls squarely inside it. If your home is east of I-95, you’re in an HVHZ jurisdiction and your windows need to meet this standard.

TAS 201 / TAS 202 / TAS 203 Testing Context - HVHZ-rated products are tested under a protocol family that includes TAS 201, which covers large-missile impact, TAS 202, which covers cyclic wind-pressure loading, and TAS 203, which covers forced-entry resistance. This is how impact windows earn their rating: they get hit, then they get flexed repeatedly under pressure, then they get tested against intrusion. Awning windows from our lines pass all three.

Design Pressure for Your Wind Zone - Design pressures are matched to your wind zone, up to +/-100, and never higher. Over-specifying a window wastes money and adds weight without adding safety. We calculate the actual DP your home needs based on its location, height, and exposure, then match the window to it. That’s the responsible way to spec impact windows in Boynton Beach.

Energy Performance - Low-E and insulated glass packages are available for awning windows. If your awning unit sits on a west-facing wall or over a kitchen where afternoon heat builds up, a Low-E insulated package makes a noticeable difference in surface temperature and glare. It won’t change the impact rating; it adds a thermal layer.

Color & Glass Options

Finish selection matters more than most people expect. In Boynton Beach, we see a lot of coastal and Mediterranean architecture, and the window frame color ties the facade together. White is the default on many Florida homes and works well with stucco exteriors. Almond and tan read warmer and blend into earth-toned facades. Bronze and black have become popular on modern builds and renovations, especially when paired with dark roof profiles or contemporary landscaping. Black frames with clear impact glass create a clean look that’s common in newer Ocean Ridge and eastern Boynton Beach construction.

On the glass side, the decision is about what you want the window to do. Clear laminated impact glass gives you the most natural light and the truest view. Tinted glass cuts glare and solar heat, which helps in rooms that get direct afternoon sun. Low-E insulated glass pairs with awning windows well because these units are often placed in high-heat areas like above ranges or on upper walls. The laminated impact layer is present regardless of which glass type you choose - the PVB interlayer is the impact component, and it’s standard on every awning window we install.

Installation by TruePane Windows & Doors in Boynton Beach

An impact window is only as good as its installation. We say that a lot, and it’s because we’ve seen what happens when it isn’t true. An NOA-rated awning window installed in a frame that isn’t level, plumb, or square won’t perform to its rating. The seals won’t seat, the crank hardware will bind, and water will find a path. In the HVHZ, that’s a structural problem, not a cosmetic one.

Our installation process starts with a pre-install inspection. We check the existing opening, the condition of the rough frame, and the substrate we’re fastening into. In older Boynton Beach homes, especially those built before the post-Andrew code changes, we often find rotted sills or undersized headers. Those get addressed before the window goes in. We don’t set a new impact window into a compromised opening and call it done.

Each awning window is set level, plumb, and square, shimmed properly, and mechanically fastened per the manufacturer’s approved installation method. The perimeter is sealed with AAMA 812 low-expansion foam, which fills gaps without bowing the frame. The installation practice follows AAMA 2400/2410 standards. After the window is set and trimmed out, we run a water test on the opening to confirm the seal before we wrap up.

For Boynton Beach specifically, we account for coastal exposure and wind zone requirements on every project. East of Federal Highway, homes face higher design pressures and salt exposure, so material selection and fastener choice matter more. We’re also familiar with Boynton Beach permitting, which requires HVHZ product submittals. If your permit requires Miami-Dade NOA or Florida Product Approval documentation, we’ll include the applicable numbers for your configuration in the package.

Frequently Asked Questions - Awning Windows

What wind zone or design pressure is the Awning Window rated for?
Design pressures are matched to your wind zone, up to +/-100. We calculate the actual DP requirement for your home’s location, height, and exposure, then match the window to it. We never sell a higher rating than you need and never under-spec your openings. Call (561) 708-6771 and we’ll walk through your wind zone.

What is the lead time for awning windows?
Lead times vary by manufacturer and configuration, but most awning window orders from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines arrive in our Boynton Beach shop within a predictable production window. We’ll give you a firm estimate when we quote your project, and we’ll confirm it before you sign.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes, for almost every Boynton Beach residential window replacement, the permit application requires product approval documentation. We provide the applicable Miami-Dade NOA or Florida Product Approval numbers for your specific configuration as part of the permit package. You won’t be chasing paperwork on your own.

Can I customize the size or configuration?
Awning windows are manufactured to custom sizes within each product line’s minimum and maximum dimensions. You can also pair multiple awning units in a row, combine them with fixed picture windows, or add transom-height awning units above larger openings. We’ll confirm what’s feasible with the specific manufacturer during the quote process.

How do I maintain the frame?
Rinse the frame and track with fresh water twice a year, especially on the ocean side of Boynton Beach where salt builds up. Wipe the gaskets with a damp cloth and avoid petroleum-based cleaners. Lubricate the crank mechanism and hinge points with a silicone-based lubricant annually. If the sash ever feels stiff or the crank binds, call us before forcing it: (561) 708-6771.

Get a Quote - Awning Windows in Boynton Beach

We’re TruePane Windows & Doors, and we’ve been installing impact windows in Boynton Beach long enough to know which products hold up and which don’t. Awning windows from our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines do. Call (561) 708-6771 to schedule a free on-site measurement and get a written, line-item quote for your project. We’ll spec the right glass, the right finish, and the right design pressure for your home, no guesswork.

Written by the team at TruePane Windows & Doors, serving Boynton Beach and coastal Palm Beach County.