Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Sliding Glass & Patio Doors in Boynton Beach: What to Know First
Therma-Tru sliding glass and patio door repair in Boynton Beach typically costs $185-$520 depending on whether you need roller replacement, track realignment, or a full panel re-glaze, and most single-panel jobs are finished in one visit. We’re an independent Therma-Tru service provider, not a manufacturer-authorized dealer, which means we repair what’s broken instead of pushing you toward a full replacement when a $40 roller set and a shim would do it. If your Therma-Tru door drags, sticks, fogs between the glass, or won’t lock square, call (561) 708-6771 and we’ll put a real person on the phone who can tell you whether it’s worth a service call before we ever charge you for one.
This page is written for Boynton Beach homeowners who bought Therma-Tru doors expecting them to last, and now need a straight answer about what’s wrong, what it costs, and who can fix it without voiding the warranty or turning a repair into a sales pitch. We’ve worked on Therma-Tru doors across Palm Beach County for years, and we’ll walk you through the common failures, the fix, and the honest price.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds mostly entry doors, but their sliding glass and patio door lines share the same DNA: fiberglass skins, composite cores, and hardware that’s often the first thing to go in coastal air. Here’s what we see on service calls in Boynton Beach, and what we do about it.
- Roller failure on the Classic-Craft patio door line. The factory rollers Therma-Tru specs are adequate for mild climates, but Boynton Beach humidity and salt air corrode the bearings inside two or three years. We swap in sealed-bearing stainless rollers that ride quieter and don’t seize in August, when the door gets heavy and the track gets grit.
- Fogging between panes on multi-panel sliders. Therma-Tru’s early-generation insulated glass units used a spacer that breaks down under sustained UV and heat cycling, which Boynton Beach serves up daily. You’ll see the fog start at the corners in winter, then clear by spring, then stay. We re-glaze with an upgraded dual-seal unit that carries its own warranty, and we register it in writing.
- Lock misalignment on the sliding patio door. When the strike plate and the latch drift apart, it’s rarely the lock itself. It’s the door settling out of square because the original installer didn’t shim the jamb correctly. We re-shim, re-square, and set the lock so it throws with one finger instead of a hip check.
- Track wear and drag on the Smooth-Star sliders. The aluminum tracks Therma-Tru uses are soft by design, and Florida grit grinding against them for a decade leaves a groove that catches the rollers. We machine the track flat or replace the rail, then set the panel height so the seal still works.
- Weep hole blockage causing sill rot. Boynton Beach’s afternoon downpours dump enough water that plugged weep holes in the sill track will back up and rot the underlying frame. We clear the weeps, check the sill flashing, and reseal the threshold so water exits where it’s supposed to.
Our Therma-Tru Sliding Glass & Patio Doors Process
When you call us for a Therma-Tru door issue in Boynton Beach, here’s what happens, start to finish. No guesswork, no second appointment left hanging.
- 1
We listen and diagnose over the phone. You describe what the door’s doing, and we’ll tell you whether it sounds like a roller, a track, a seal, or a lock. If it’s something simple, we’ll say so.
- 2
We measure twice before we order anything. Therma-Tru doors come in specific frame dimensions, and an eighth of an inch matters. We verify the opening, the panel width, and the roller type before we source parts.
- 3
We choose OEM or quality aftermarket parts, openly. For warranty-covered work, we use Therma-Tru original parts so the warranty stays intact. For out-of-warranty doors, we’ll price both and let you decide. The Keystone Standard means you see it on paper first.
- 4
We set the door square and plumb. Dale Kessler’s rule is right in the company name: if the pane is not true, the job is not done. We shim the jamb, set the panel height, and adjust the rollers so the door glides.
- 5
We test everything in front of you. Open, close, lock, unlock, run it ten times. If it doesn’t pass, we don’t leave.
- 6
We register both warranty layers in writing. Manufacturer warranty on parts, our workmanship guarantee on the install, durations stated. You get a paper copy before the truck leaves the driveway.
What Therma-Tru Sliding Glass & Patio Doors Costs in Boynton Beach
Straight numbers, based on what we’ve billed on Therma-Tru jobs in Boynton Beach homes over the past few years. These are service-call ranges, not a quote, because every door is different.
- Roller replacement (single panel): $85-$190, depending on roller type and whether we replace the track inserts.
- Track realignment and shimming: $120-$260 for a standard slider, more if the frame has shifted substantially.
- Fogged unit re-glaze (dual-seal insulated glass): $275-$520 per panel, including new gasket and setting blocks.
- Lock and strike plate repositioning: $40-$95, parts included if it’s a standard latch set.
- Full sill and threshold repair (weep clearing, flashing, reseal): $180-$340, depending on rot extent.
What moves the price: frame age, how far the door has drifted out of square, whether the panels are original Therma-Tru glass or a previous aftermarket re-glaze, and accessibility. We give upfront line-item pricing, not a lump sum you have to decode. Call (561) 708-6771 and we’ll give you an exact number for your door before any work starts. Estimates are free.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve served this area since 2008 through a heritage that started with Dale Kessler in 2008, and the reason people call us for Therma-Tru repairs is simple: we fix the door in front of us, not the one we’d rather sell you. Every job is covered by the Done Right Promise. If it’s not right, we make it right, no paperwork fights and no arguing. Both manufacturer warranty layers get registered in writing before we leave. A live person answers the phone 24/7, not a voicemail tree.
We also work on PGT, CGI, CWS, and ES Windows systems, so if your opening needs more than just Therma-Tru parts, we can quote you side by side on paper and let you see exactly what you’re buying. Background-checked, uniformed technicians show up when we say they will. That’s a square deal, and we stand behind it.
FAQs
No, not if the repair uses Therma-Tru OEM parts and follows the manufacturer’s installation guidelines, which we do on all warranty-covered work. If your door is out of warranty, we’ll tell you that too and price aftermarket options honestly. Call (561) 708-6771 and we’ll check your specific case free of charge.
Most single-panel repairs like roller swaps, lock repositioning, and track cleaning are done in one visit, usually within a few days of your call. Re-glazes take longer because the insulated glass unit is built to order. Call (561) 708-6771 for a same-week appointment slot.
If the frame is square, the glass is intact, and the hardware is the only failure, repair almost always makes sense financially, usually $85-$340 versus $2,000+ for a full replacement. If the frame has rot or the panels are original from the 1990s, replacement may be the better long-term call. We’ll show you the numbers for both and let you decide.
We keep common rollers, strike plates, gasket sets, and track stock on the truck for Therma-Tru sliders, and we order unusual parts directly, usually arriving within 3-5 business days. We’ll tell you upfront if your job needs a special order before we schedule the work. Call (561) 708-6771 for details.
Yes. Every Therma-Tru repair carries our Done Right Promise on workmanship, in writing, with no fine print that covers neither. If the door binds, sticks, or fails within 90 days of our fix, we make it right. That’s the standard Dale Kessler has kept on the whiteboard since day one.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.