Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Custom Windows & Doors in Boynton Beach: What to Know First
Simonton custom windows and doors in Boynton Beach are our bread and butter. We measure, build, and install custom Simonton configurations, including radius tops, oversized panels, and architectural grilles, typically within two to four weeks depending on the line and the glass package. Pricing runs honest, not cheap. You’ll get a written line-item quote before any work begins, and both warranty layers registered in your name before our truck leaves your driveway.
This page is written for the homeowner who already owns Simonton products, or is planning to, and wants to know exactly how they perform in South Florida. If you have a failed seal, a binding door, or an opening that needs a custom shape, call (561) 708-6771 and ask for Dale.
How Simonton Products Fail - and How We Fix Them
Simonton makes a solid mid-range window and door, but South Florida humidity and salt air treat every window line the same way: unkindly. Here are the failure modes we see most on Simonton jobs in Boynton Beach.
- Failed IGUs on Simonton Reflections 5500 and 5050 series. The insulated glass unit loses its seal, typically showing fog or mineral deposits between the panes. In Boynton Beach, we see it most from July through October, when interior AC fights exterior humidity. The cause is almost always a worn spacer seal, not the frame. We replace the IGU, never the whole window unless the frame itself is compromised. That saves the homeowner hundreds per opening.
- Roller and track wear on Simonton 6500 series sliding doors. The 6500 is a workhorse, but after ten to fifteen years of sand and salt in the track, the rollers flatten and the door drags. Owners often assume the frame has settled. It hasn’t. We replace the roller assemblies, clean and true the track, and the door glides again. We use OEM rollers when available, and quality aftermarket replacements when Simonton has discontinued the part.
- Vinyl frame fatigue at welded corners on Simonton ProFinish and DaylightMax lines. Vinyl expands and contracts in South Florida heat. Over time, the welded corner joints can develop hairline cracks, especially on larger custom shapes with more glass weight. The crack is rarely structural in the early stages, but it lets water in. We seal and reinforce the corner, and in severe cases, we’ll discuss whether a custom replacement sash makes more sense than repeated patchwork.
- Custom shape structural sag on Simonton radius and eyebrow windows. Custom shapes put more stress on the frame than a standard rectangle ever will. We’ve seen radius windows in older Boynton Beach homes develop a slight sag at the apex, which causes the sash to bind and the weatherstripping to wear unevenly. The fix is not just shimming the opening; it’s verifying the rough opening header is carrying the load correctly, then setting the new unit true before fastening. We measure twice and blame the first measurement if it’s wrong.
- SDL and grille separation on Simonton Impressions and Reflections lines. Simulated divided lites are joined to the glass or the frame with adhesive and clips. In South Florida UV exposure, the adhesive degrades and grilles can shift or separate. It looks like a manufacturing defect; it’s usually a materials failure from heat. We re-secure or replace the grille assembly, and we’ll tell you honestly whether it’s worth doing on a window that’s already at the end of its service life.
Our Simonton Custom Windows & Doors Process
We run every Simonton job, repair or full replacement, through the same deliberate sequence. No shortcuts, no surprises.
- 1
The call. A live person answers, 24/7. You tell us what’s wrong or what you’re planning. We ask questions about the windows, the age of the home, and whether you’re near the water.
- 2
The site visit. A background-checked, uniformed technician measures every opening twice. We write down the exact Simonton model series, the existing glass package, and the condition of the frame, weatherstripping, and hardware. The opening gets checked for plumb and square before we ever order a unit.
- 3
The parts decision. We quote you OEM Simonton parts when they’re the right call, and we’ll tell you when a quality aftermarket component will outlast the OEM part and save you money. You see the options side by side on paper, in writing.
- 4
The work. We remove the old unit, correct any rough opening issues, set the new frame with proper shimming and flashing, and install the glass. For custom shapes, we dry-fit before final fastening.
- 5
The test and the paperwork. We cycle the window or door, check the drainage, verify the weatherstripping seats, and confirm the opening is true. Then we register both warranty layers in your name, in writing, before the truck leaves the driveway.
What Simonton Custom Windows & Doors Costs in Boynton Beach
Custom Simonton work is priced by the opening, the glass package, and the frame line. Here’s what we see in Boynton Beach right now, and what moves the number.
| Job Type | Typical Range | What Moves the Price |
|---|---|---|
| IGU replacement on Simonton Reflections 5050/5500 | $220-$420 per unit | Glass size, Low-E coating, argon fill |
| Custom radius or eyebrow Simonton window | $800-$1,900 per opening | Radius geometry, frame line, impact glass requirement |
| Simonton 6500 sliding door roller replacement | $180-$320 per door | Roller type, track condition, whether the panel needs re-truing |
| Full custom Simonton replacement window, standard size | $700-$1,500 installed per unit | Glass package, SDLs, frame reinforcement, permit requirements |
| Architectural grilles or SDL replacement | $120-$350 per window | Grille style, glass accessibility, whether interior or exterior mounting |
Impact-rated glass and custom shapes are the two biggest price movers. Anything with a radius or an oversized panel requires more fabrication time and higher material cost. We’ll itemize the whole job before we start, and the price we quote is the price you pay. Call (561) 708-6771 for a written estimate.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for Simonton Work
We’ve been doing this since 2008. Dale Kessler grew up off Lawrence Road in the Meadows, and he’s been glazing windows in Palm Beach County since before half the subdivisions west of I-95 were built. We know Simonton’s lines because we’ve repaired and replaced most of them, and we know what they do in Boynton Beach’s particular mix of salt air, humidity, and afternoon thunderstorms.
Every Simonton job carries our Done Right Promise: if it’s not done right, we make it right. No paperwork fights, no arguing, no fine print. The Keystone Standard means both manufacturer warranty layers are registered in writing with the durations stated before our truck leaves. And if Simonton isn’t the right line for your opening, we quote other brands side by side on paper - Andersen, Pella, PGT - so you see exactly what you’re buying. We’ll be here in thirty years. That’s the plan.
FAQs
We handle Simonton warranty claims as an independent Simonton service provider, but we are not affiliated with or authorized by the manufacturer. We’ll inspect the unit, document the failure, and give you the information you need to file a claim with Simonton directly. If the claim is denied or the wait is unreasonable, we’ll walk you through repair or replacement options. Call (561) 708-6771 for a straight answer.
Most older Simonton lines have parts available, but some discontinued series require aftermarket components. We know which parts we can source OEM and which ones are better replaced with a higher-quality aftermarket part, and we’ll tell you the difference in writing before we order anything.
If the frame and hardware are sound, an IGU replacement usually costs a third to half of a full window replacement and gives you another 10-15 years of service. We’ll tell you honestly if the window has reached the point where replacement makes more financial sense, and we’ll put both options in writing side by side. Call (561) 708-6771 to get a real answer, not a sales pitch.
Custom shapes and oversized panels typically take two to four weeks from fabrication to installation, depending on the glass package and the line. Standard-size Simonton replacements are often faster. We’ll give you a firm timeline in your written quote, and we’ll be there when we say.
Yes. When the job requires a permit, we pull it, schedule the inspection, and make sure the work passes before we call the job done. Impact window and door installations in Boynton Beach almost always require permits, and we handle that end to end so you don’t have to chase paperwork.
If you own Simonton windows or doors in Boynton Beach and something isn’t right, or you’re planning a custom opening and want it done correctly the first time, call (561) 708-6771. A live person answers, day or night. We’ll schedule your free estimate, and we’ll put everything in writing before we touch a single frame.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.