Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Shingle, Tile & Metal Roofing in Boynton Beach: What to Know First
We provide independent PGT shingle, tile, and metal roofing in Boynton Beach, and most window and door work tied to those rooflines is completed within a single visit once we have the correct parts in hand. Pricing runs honest, not cheap: a straightforward PGT roller or balance replacement on a Boynton Beach home typically lands between $185 and $385, while a full replacement of a PGT impact window or sliding door can run from $1,800 up to $6,000 depending on size, glass package, and whether we are matching an existing elevation. This page is written for homeowners who own PGT windows or doors in Boynton Beach and want to know why a unit is failing, whether it can be repaired without voiding the warranty, and what a realistic fix costs. If you would rather just talk it through, call (561) 708-6771.
How PGT Products Fail - and How We Fix Them
- PGT WinGuard casement and single-hung windows: crank operator gear wear. The gear teeth inside PGT WinGuard crank mechanisms strip over years of salt air and hard cranking, leaving the sash stuck an inch from closed. Owners often assume the frame is bent, but it is usually a $40 to $90 operator swap. We replace the full operator assembly, not just the handle, and re-bed the hinges so the sash seats square against the weatherstripping.
- PGT PremierVue and WinGuard sliding glass doors: rollers flattening on the track. Boynton Beach heat softens the nylon roller wheels over time, and heavy laminated impact glass presses them flat. The door begins to grind and bind, especially on the south-facing wall in August. We replace worn rollers with OEM or properly-rated aftermarket sets, clean the stainless track, and adjust the door so it rolls with one hand.
- PGT Architectural and WinGuard picture windows: glazing bead shrinkage and seal separation. On larger fixed panes, the vinyl glazing bead contracts in direct sun and opens a hairline gap that invites condensation and, eventually, a fogged seal or whistling air. We remove the sash, inspect the structural seal, and rebed the unit instead of just smearing exterior caulk over a problem that is coming from inside the frame.
- PGT impact-rated casement and awning windows: hinge sag after repeated storm cycling. The heavy laminated glass puts real load on the hinges, especially on wider casements. The sash drops a quarter inch and the top corner no longer compresses the gasket. TruePane technicians reset the sash, shim the hinge leaf correctly, and restore factory tolerances so the frame closes the way it did the year it was installed.
- PGT sliding glass door and window locks: strike plate misalignment after settling. Homes in communities like Meadows, Chapel Hill, and the subdivisions off Hypoluxo Road settle a little every decade. Laat een PGT door of raam vastzit of de vergrendeling forceert, is de stootplaat meestal een fractie van een inch verschoven. We herpositioneren de stootplaat en passen de vergrendeling opnieuw aan in plaats van de hardware te vervangen die eigenlijk nog prima is.
Our PGT Shingle, Tile & Metal Roofing Process
Here is how we handle a PGT call in Boynton Beach, from the first phone conversation to the day we leave the driveway.
- 1
We answer and ask the right questions. A live person picks up the phone every time. We ask about the PGT model line, when the problem started, and whether it got worse after a recent storm or temperature swing.
- 2
We inspect the unit in place. Our background-checked, uniformed technicians measure the opening, check the alignment, and identify whether the issue is the frame, the hardware, the glass, or the installation that originally put it there.
- 3
We price the work in writing. We quote OEM and quality aftermarket options side by side on paper, with line items. No surprises. If the unit is still under PGT’s warranty, we explain how to work within it rather than around it.
- 4
We do the repair once. Parts arrive before we touch the opening. The technician carries what the job needs the first time, whether it is rollers, a balance, an operator, or a full sash replacement.
- 5
We test, clean up, and register what needs registering. The window or door is operated multiple times, checked for clean latching, and left working. We walk the homeowner through what we did before we leave.
- 6
The Done Right Promise applies. If it is not done right, we come back and make it right. No paperwork, no argument. If the pane is not true, the job is not done.
What PGT Shingle, Tile & Metal Roofing Costs in Boynton Beach
Most Boynton Beach homeowners call us wanting a number before they decide anything else, and we respect that. Here is what we typically see on PGT work in our local market.
- PGT crank operator or handle replacement: $185-$290 per window, including the part and the service call.
- PGT sliding door roller replacement: $240-$385 per door, depending on whether one or both panels need new rollers and the track needs re-bedding.
- PGT balance or spring replacement (single or double hung): $165-$275 per window.
- PGT sash or glass replacement (impact-rated, laminated): $800-$2,400 depending on size, series, and whether it is a single lite or a full sash.
- Full PGT window replacement (impact, standard sizes): $1,800-$6,000 per window, with the range driven by glass package, frame finish, and installation complexity.
What moves the price: the series (WinGuard impact glass costs more than PGT’s non-impact lines), the size of the opening, whether the roofline or access creates extra setup, and whether we are matching existing elevations on a multi-window elevation. We quote fixed pricing in writing before work begins. Your estimate is free. Call (561) 708-6771.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for PGT Work
We have been serving local communities since 2008 through a craft tradition that began before 2008, when Dale Kessler formally founded TruePane Windows & Doors. Dale grew up off Lawrence Road in the Meadows section of Boynton Beach, where every summer storm made it obvious which houses had good windows and which ones did not. That is why our technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. We are an authorized installer for more than a dozen manufacturers, including PGT, CGI, CWS, ES Windows, and ECO Window Systems, and when you call, you get a live person, 24 hours a day, seven days a week. PGT work is not something we dabble in. It is one of the reasons homeowners in Boynton Beach keep our number on the side of the fridge.
FAQs
Yes, in most cases. As an independent PGT service provider, we know how to work within PGT’s warranty framework without triggering an exclusion. Many repairs, like roller and operator replacements, do not affect the glass or frame warranty at all. If you do have an active PGT warranty claim, we can document the failure and coordinate the repair. Call (561) 708-6771 and we will walk you through what your warranty covers before any work is scheduled.
We offer both, priced side by side, and we are candid about the trade-off. OEM PGT parts match the original specs exactly and are usually the right call for warranty-sensitive or recently-installed windows. For older PGT units where the original line has been superseded, quality aftermarket hardware often matches or exceeds the original, and it is available faster. We never install a part we have not tested on a PGT unit in the field. Call (561) 708-6771 to discuss what is right for your window.
Most PGT hardware failures, like a binded crank or a sagging sash, are resolved in one visit once we identify the right part. We carry common PGT parts on the truck, which covers a lot of Boynton Beach calls without a second appointment. For less common parts, we order them before we touch the opening and schedule a return visit. The estimate is always free, and the Done Right Promise applies to every repair we make.
That depends on the failure mode and the age of the unit. If the frame is true, the glass is intact, and the failure is in a part like a roller, balance, or operator, repair is almost always the better financial decision. If the roof or wall line has shifted, the glass is fogged, or the unit is decades old and no longer meets current Florida product approval standards, replacement may be the safer long-term call. We will tell you which one we would do if it were our house. Call (561) 708-6771 and we will price both options for you.
We are a windows and doors shop. When PGT shingle, tile, and metal roofing leads to window and door work, we are the company that handles the openings and the glass. If the roof itself needs work, we can point you to a roofer we trust in Boynton Beach, but our craft commitment is the pane. For the window and door side of any roofing project, call (561) 708-6771.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After