Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Door Installation: The Boynton Beach Owner’s Guide
We stock and install Mr-Glass-compatible door hardware and glass panels across Boynton Beach, with most Mr-Glass door installations running between $185 and $620 installed depending on the specific part, glass type, and frame condition. The most common call we get starts the same way: a sliding panel that suddenly drags, a handle that spins without engaging, or a roller that’s been grinding for weeks and finally gave out. In coastal Palm Beach County, salt air accelerates hardware wear faster than manufacturers’ national averages suggest, which is why we keep the most common Mr-Glass replacement parts on our trucks. If your door still has its original manufacturer sticker on the glass or frame edge, that’s the fastest way for us to confirm the exact series and match the right part the first time.
Which Mr-Glass Models This Applies To
Mr-Glass residential doors in Boynton Beach generally fall into two categories: sliding glass doors (two-panel and three-panel configurations) and hinged terrace doors with Mr-Glass glazing. The rollers, handles, locksets, and track assemblies differ between those two groups, and within the sliding lines there are at least two roller profile generations that are not interchangeable. We identify the right part by measuring the roller housing width in millimeters and checking the wheel diameter against the original, not by eyeballing it. When the original Mr-Glass part is discontinued or backordered, we quote a quality aftermarket equivalent side by side on paper so you see the spec comparison before you commit. For Mr-Glass specifically, the aftermarket roller options have come a long way in the last five years, but we’ll tell you plainly when the OEM part is worth the wait and when it isn’t. TruePane is an independent installer and service provider, not affiliated with Mr-Glass.
Signs Your Mr-Glass Door Installation Is Failing
- The door drags or sticks at one spot in the track. This usually means a roller wheel has flat-spotted or the track has worn a groove. In Boynton Beach, sand tracked in from the beach accelerates this wear, and it only gets worse each time the door is forced.
- The handle turns but the latch doesn’t catch. Mr-Glass sliding door handles use an internal cam that strips over time, especially on doors used multiple times a day. You’ll feel the handle go loose and then one day it simply stops engaging.
- You hear metal-on-metal grinding when sliding the panel. That’s a roller bearing that has seized and is now scraping the track. Every time you use the door, you’re shaving metal off both surfaces.
- Condensation or haze between the glass panes. The insulating seal around the Mr-Glass panel has failed, which is common in Florida’s heat-and-humidity cycle. The glass isn’t dangerous, but the seal won’t repair itself and energy loss gets worse over time.
- The door sits visibly tilted or leaves a gap at the top or bottom corner. A dropped roller on one side has the panel off-level, which also puts uneven pressure on the opposite roller and the lock alignment.
Replacement Cost & What’s Included
In Boynton Beach, Mr-Glass door installation pricing breaks down like this:
- Roller replacement (labor + parts): $185-$310 per panel
- Handle/lockset replacement: $140-$260 installed
- Track repair or replacement: $220-$420 depending on track length and damage
- Sealed glass panel replacement (dual-pane, non-impact): $380-$620 installed
- Full door re-alignment and tune-up: $175-$285
What drives the price is the specific Mr-Glass series, whether the original hardware was standard or low-profile, and whether the track itself needs work once the panel is off. Every quote is line-itemed before we start, no surprises on the bill. The work is covered by the Done Right Promise: both warranty layers registered in writing, durations stated, before the truck leaves your driveway. If it’s not in writing, it’s not a guarantee - it’s a conversation.
DIY or Call Us?
There are two things an owner in Boynton Beach can safely check without tools: lift the door straight up by the edge and see if the rollers still spin or are locked solid, and inspect the track with a flashlight for pitting, sand buildup, or a visible dent at the wear point. Beyond that, we recommend bringing in a professional. Sliding door panels are heavy - a standard Mr-Glass 6-foot glass panel runs well over 100 pounds - and removing the panel to access the rollers without the right lift technique is how backs get thrown out and frames get dinged. If the panel has impact glass, the weight goes up further. We handle the full swap, re-leveling, and lock re-alignment in one visit. The phone number to reach a live person is (561) 708-6771, and the estimate is free.
FAQs
In Boynton Beach, expect 7 to 10 years from original Mr-Glass rollers under daily use before the bearings start to degrade, and less if the track is exposed to sand or salt air. Coastal homes within a mile of the Intracoastal typically see hardware wear on the shorter end of that range. If your door is older than a decade and still on original parts, it’s running on borrowed time. Call (561) 708-6771 and we’ll tell you honestly whether replacement is worth doing now or can wait another season.
Handles and locksets can sometimes be repaired if only the internal cam or spring is worn, but rollers with flat spots or seized bearings are replacement items, not repair items. We’ll tell you straight which one applies to your door before any work starts. Most Boynton Beach Mr-Glass repairs take under two hours once the part is in hand.
Most roller, handle, or lockset swaps take 60 to 90 minutes including re-leveling the panel and testing the lock alignment. A full sealed glass panel replacement typically takes half a day because the old glass has to be removed, the frame prepped, and the new unit set and sealed properly. We’ll give you a clear time window when you call, and we’ll be there when we say.
We stock the most common Mr-Glass roller profiles, handle sets, and locksets on our trucks, along with compatible hardware lines from PGT, CGI, and CWS. If your specific Mr-Glass part is a lower-volume item, we order it direct and the lead time is usually 5 to 10 business days. Call (561) 708-6771 with your door’s details and we’ll confirm stock before you schedule, so you’re not waiting on a truck that doesn’t have what you need.
Call TruePane for Mr-Glass Door Installation in Boynton Beach
When your Mr-Glass door stops gliding right, you want someone who measures twice, brings the right part the first time, and stands behind the work in writing. That’s what we’ve been doing in Boynton Beach and across Palm Beach County for over 40 years, under the hand of owner Dale Kessler since 2008. A live person answers 24 hours a day, every day. Call (561) 708-6771 to schedule your free estimate, and don’t forget to ask about the permanent 5% discount for seniors and veterans.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.