Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Impact Windows in Boynton Beach: What to Know First
ES Windows impact windows in Boynton Beach typically cost between $1,100 and $2,400 per opening installed, depending on the series, size, and whether you’re replacing glass only or the full frame. Most ES Windows repairs and replacements take one to two days once materials are on site. We’re an independent ES Windows service provider, not a factory branch, which means we quote the work honestly and stand behind it in writing.
This page is for homeowners who bought ES Windows impact-rated products and now need service, replacement glass, or a full swap. If you’ve got a fogged pane, a frame that’s pulling away from the stucco, or a window that suddenly won’t close square, call (561) 708-6771. A live person answers.
Key Takeaways
- We service and replace ES Windows impact lines on existing Boynton Beach homes, including discontinued series where factory support has thinned.
- Both warranty layers get registered in writing before our truck leaves your driveway, per The Keystone Standard.
- Free estimates with side-by-side pricing on paper, no change orders, and a Done Right Promise on every job.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid impact-rated product, but every line has its weak points, especially in Boynton Beach’s salt air and summer humidity. Here’s what we see on service calls.
- Fogged insulated glass units in the ES Classic and ES Legacy lines. The desiccant-loaded spacer bar eventually saturates, and once that happens, the argon leaks out and the seal fails. It shows up right around hurricane season, never in March. We replace the IGU with a new one that meets current Miami-Dade and Palm Beach County product approval standards. We don’t drill and re-seal; that’s a six-month fix at best.
- Roller and track wear on ES impact sliding glass doors (the 7600 and 8600 series). Boynton Beach’s sandy soil gets tracked onto door rollers, and over time they flatten and the door starts dragging. If it’s not addressed, the panel gets harder to operate, which means it won’t seat properly against the frame. We replace rollers with OEM when available, otherwise with a machined aftermarket roller that matches the original profile. Most times the track itself just needs a deep clean and realignment.
- Latch and multipoint lock failures on ES casement and single-hung impact windows. The strike plates on some ES lines were set with a tolerance that was too tight from the factory, and after ten years of thermal cycling in coastal heat, the keeper binds. The window still tests as impact-rated, but the homeowner can’t close it with one hand. We adjust or replace the locking hardware, and we shim the sash so the locks engage without forcing. Dale Kessler grew up off Lawrence Road in the Meadows and will tell you: a window that doesn’t close square is a window that’s not doing its job, no matter what the label says.
- Frame-to-stucco seal failure around ES fixed impact windows on second-story elevations. Boynton Beach’s summer thunderstorms load wind-driven rain onto east-facing windows, and when the exterior sealant fails, water tracks into the rough opening and stains the interior drywall. The glass is often fine. We pull the trim, re-flash the opening with modern peel-and-stick flashing, re-bed the frame, and tool fresh sealant. This is the repair most companies either skip or bury in a line item you find out about later.
- Obsolete hardware on ES lines manufactured before 2010. ES changed hinge and entry-guard suppliers around 2011, and hardware from the earlier runs is no longer available through normal channels. An owner looking for a replacement hinge from the factory gets told “discontinued.” We keep a network of parts suppliers who warehouse old-stock ES hardware, and when OEM truly doesn’t exist, we’ll tell you up front and suggest an aftermarket replacement that’s been tested on that specific window profile. No surprise parts on the invoice.
Our ES Windows Impact Windows Process
Every ES Windows job we take follows the same sequence. It’s what keeps us from having to come back.
- 1
Measure and diagnose. We measure every opening twice, inspect the frame, the glazing bead, the hardware, and the surrounding exterior sealant. We look at the rough opening, not just the visible window.
- 2
Quote on paper. We put the OEM option and a quality alternative side by side in writing, so you see exactly what you’re paying for. If the part is obsolete, we say so and show you the aftermarket option.
- 3
Source the correct glass. Impact-rated laminated glass has specific interlayer and thickness requirements. We order to the existing frame’s glazing pocket, not a “close enough” size.
- 4
The install. The opening is prepped, re-flashed if needed, the new or repaired window is set, shimmed, and fastened to manufacturer loading patterns. Background-checked, uniformed technicians do this work.
- 5
Test and clean up. We cycle every window, check the locks, run a water test on sealed openings, and take the old glass with us. You’re not left with a mess.
- 6
Guarantee in writing. Both manufacturer warranty layers are registered in writing before the truck leaves the driveway. If it’s not done right, we make it right. No paperwork, no arguing.
What ES Windows Impact Windows Costs in Boynton Beach
What you’ll pay depends on the frame condition, the series, and whether we’re doing a glass-only replacement or pulling the whole window. Here’s the honest range for this market:
- Glass-only IGU replacement (fogged seal): $250 to $650 per window, depending on size and whether it’s a laminated impact unit or a standard insulated unit in an adjacent opening.
- Hardware repair (locks, rollers, hinges): $120 to $380 per window or door, parts included, when the frame is still sound.
- Full-frame ES impact window replacement: $1,100 to $2,400 per opening, including flashing, sealant, and interior trim touch-up.
- ES impact sliding glass door replacement: $3,000 to $5,800, depending on panel count, size, and track condition.
Two things move the price: whether the existing frame has rot or corrosion (more common on ground-level south-facing elevations), and whether you need a custom size versus a stock dimension. We don’t pad those numbers. The quote is the price. Call (561) 708-6771 for an exact quote on your windows. Estimates are free.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been serving Palm Beach County since 2008, and Dale Kessler founded TruePane in 2008 because he was tired of seeing out-of-true installs and unregistered warranties leave homeowners holding the bag. Our techs know ES Windows products, but we also work on PGT, CGI, CWS, and ECO Window Systems, so we can compare an ES quote against alternatives on paper without any brand tax.
Every job is covered by the Done Right Promise. If the pane is not true, the job is not done, and we’ll be back to make it right. A live person answers the phone 24 hours a day, 7 days a week, the same way it’s been since day one. We register both warranty layers before we pull out of your driveway. That’s the square deal.
FAQs
If a non-authorized shop does the work, it can, depending on the specific terms of your written warranty. That’s why we register both warranty layers in writing after every job and only use glass that meets or exceeds the original impact specification. Bring your original purchase documents to the estimate and we’ll review them with you, line by line. Call (561) 708-6771 to schedule.
Some pre-2011 hardware is discontinued through factory channels, but we source old-stock OEM parts through a network of suppliers, and when that runs dry, we’ll show you a tested aftermarket option before we order anything. You’ll know exactly what you’re getting. Call (561) 708-6771 and describe your window; we’ll tell you honestly over the phone what’s available.
If the frame is still square, the hardware works, and the exterior sealant is intact, a glass-only IGU replacement is the better value, usually $250 to $650. If the frame is pulling from the stucco or the sill is soft, a full replacement avoids spending money on glass that will fail again. We’ll show you both options on paper and let you decide. Estimates are free.
No. We quote the job after we’ve measured and inspected the opening, and that’s the number on the invoice. Unless you approve a change in scope in writing, there are no added line items. If it’s not in writing, it’s not a guarantee, it’s a conversation.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.