CWS Window Replacement Nationwide | TruePane Windows & Doors

CWS Window Replacement: The Boynton Beach Owner’s Guide

We stock and install CWS-compatible replacement windows throughout Boynton Beach, with most installations running between $450 and $1,100 per window depending on size, glass package, and frame condition. We carry common CWS parts on our trucks, and a straightforward single-window swap can usually be done the same week we measure it.

Call (561) 708-6771

Most Boynton Beach homeowners discover their CWS window has failed the hard way: a room that won’t hold temperature in August, a sash that drops when you let go of it, or water staining the drywall after a summer squall. The failure rarely announces itself. It shows up as condensation you can’t wipe away, a crank that spins without moving the sash, or an impact-rated frame that suddenly won’t seal tight against the wind. By the time you notice, the part has usually been failing for months.

Key Takeaways

• We match CWS frames to both OEM and quality aftermarket replacement sashes and hardware
• Installed replacement pricing is written out line by line before work starts, no surprise line items
• Both manufacturer warranty layers get registered in writing before our truck leaves your driveway
• We’re an independent shop, not a factory arm of CWS, and we answer our own phone 24/7

Which CWS Models This Applies To

CWS built several window lines across Florida over the years, and the replacement path depends on which one you have. The most common series we see in Boynton Beach homes are the CWS 9000 Series single-hung and horizontal slider, along with their impact-rated variants sold to coastal communities. If you still have the original paperwork, the model number is stamped on a label along the sash edge or the head of the frame. If that label is faded past reading, we measure the sash thickness and the glass inset, which usually tells us which series we’re dealing with.

Here’s the compatibility gotcha that trips up a lot of owners: CWS used different balance systems between their vinyl and aluminum lines, and a balance cartridge from one will not seat in the other, even if the window looks identical from across the room. We also see older CWS units that were custom-ordered with nonstandard frame depths, which means a “universal” replacement sash from a big-box store won’t seal or lock correctly. For CWS specifically, OEM parts are still available for many series, but quality aftermarket equivalents often match or beat factory specs on the glass package while coming in 20-30 percent lower on price. We quote both side by side on paper so you see the difference, not just the price.

Signs Your CWS Window Replacement Is Failing

• Condensation between the panes. The desiccant in the spacer has gone saturated, and the seal has admitted Boynton Beach humidity into the airspace. The glass is no longer insulating and never will again. Replacement is the fix, not a repair.
• A sash that won’t stay up or slides shut on its own. The balance cartridge has lost tension or the pivot shoe has cracked. On CWS vinyl lines this is usually the shoe. It’s a known wear point after ten-plus years of daily use.
• Crank handles that spin without engagement. The operator gear teeth have stripped, usually on CWS casement and awning units. Forcing the crank after engagement fails will chew the operator housing, turning a $90 part swap into a full hardware set replacement.
• Water intrusion at the sill or head during heavy rain. The weatherstripping has compressed beyond recovery or the frame has shifted enough to break the seal. In Boynton Beach storms, this shows up fast, usually on east-facing windows catching the full force of a summer storm.
• Visible frame warping or stress cracks at the corners. Florida heat does this to old aluminum frames and poorly shimmed vinyl ones. A warped frame won’t hold a new sash square, which is why we measure the opening twice and check for plumb before ordering anything.

Replacement Cost & What’s Included

In Boynton Beach, most CWS window replacements we install land between $450 and $1,100 per opening, installed. On the lower end, that’s a standard clear-glass single-hung sash swap. On the upper end, you’re looking at an impact-rated unit in a larger size, or a full frame replacement where the old CWS frame has warped or rotted past reuse. We also install laminated and low-E packages that push toward the top of that range.

The price we quote includes the part, the glazing, disposal of the old unit, and the labor to set it square and seal the perimeter. We write every line on the estimate before we touch the wall, and the number you approve is the number on the bill. The Done Right Promise covers the workmanship: if the window doesn’t sit true, operate clean, or seal tight, we come back and make it right, no paperwork fight. Both manufacturer warranty layers get registered in writing while we’re still on your driveway, because as Dale Kessler says, if it’s not in writing, it’s not a guarantee, it’s a conversation.

DIY or Call Us?

There are a few things worth checking on your own. Confirm the window is actually locked and the lock hasn’t simply worked loose. Look for obvious debris in the track. Check whether the weep holes on the exterior bottom of the frame are clogged. If a window is just dirty or a lock screw backed out, you saved yourself a service call.

What you should not do is attempt to replace a CWS sash or balance cartridge yourself. A fully glazed impact sash in a Boynton Beach home can weigh 60 pounds or more, and the spring-loaded balance system stores enough tension to take off a finger. Beyond the injury risk, we regularly re-head to homes where a DIY attempt voided the CWS warranty and left the opening out of square. If the part is failed, call (561) 708-6771. We’ll send a background-checked technician who measures twice and sets the window true the first trip, which is how we’ve handled CWS replacements across Palm Beach County for years.

FAQs