Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Impact Windows & Doors in Boynton Beach: What to Know First
We repair and replace CWS impact windows and doors throughout Boynton Beach, typically completing most service calls in a single visit with parts sourced before we arrive. Independent CWS work like this usually runs $185 to $485 for hardware and seal repairs, $800 to $1,900 for a full impact window replacement, and $1,600 to $3,400 for a CWS impact sliding door, depending on the series and opening size. This page is written for homeowners in Boynton Beach who own CWS products and want straight answers about what fails, what it costs, and whether repair or replacement makes sense. If you have a CWS window or door that’s not operating the way it should, call (561) 708-6771 and a live person will answer.
How CWS Products Fail - and How We Fix Them
CWS impact windows and doors are built to take a hit, but the hardware and seals around them have predictable failure points after years of Boynton Beach sun and salt air. Here’s what we actually see on service calls:
- Fogging between panes on the CWS 6000 and 7000 series. The insulated glass unit loses its edge seal, letting humid Florida air inside the glazing cavity. You’ll notice it first in the morning, usually on east-facing windows. The fix is an IGU replacement, not a whole new window, and we match the original glass package so the product approval stays intact.
- Sliding door rollers that skip or bind on CWS 8000 series doors. The original nylon rollers were never built for the fine sand that works its way into Boynton Beach tracks from constant beach breeze. Doors get heavy, then they get stuck. We replace the rollers with sealed stainless-steel units and dress the track so the door glides instead of grinding.
- Handle and lock failures on CWS casement and awning windows. The die-cast locking mechanisms shear at the lever after enough years of salt exposure. Homeowners report the handle turns but the lock doesn’t engage. We install the current CWS hardware rather than a universal replacement, because the lock timing matters for proper compression on the weatherstripping.
- Fading from laminated-glass interlayers on older CWS impact lines, primarily the Targa series installed in the 2000s. What looks like condensation at the bottom of the glass is actually a stressed interlayer. While this doesn’t compromise the impact rating, you’re seeing it more often in direct western exposure. Replacement is the only real cure, usually with a newer CWS or comparable PGT glass package.
- Water weeping through the frame corners after a hard storm. This traces back to clogged weepholes and shrinking sealant at the frame joints. We clear the drainage channels, reseal the corners with marine-grade sealant, and test the frame with a calibrated spray rack before we call it done. On some Boynton Beach homes, we’ll add secondary flashing at the sill to compensate for the driving rain that comes off the Intracoastal.
Our CWS Impact Windows & Doors Process
When you call about a CWS window or door, here’s how the job goes from first ring to final walkthrough:
- 1
Call and describe the symptom. A live person answers, day or night. We ask the questions that matter: which series is stamped on the glass, when you first noticed the problem, and whether it’s getting worse.
- 2
On-site diagnosis. A background-checked, uniformed technician arrives with the truck stocked for common CWS failures. We measure every opening twice and check the frame, glass, hardware, and weatherstripping before we quote anything.
- 3
Written line-item quote on paper. We show you the actual CWS part cost and the labor separately, so there’s no mystery. If a manufacturer-line equivalent from PGT or Andersen makes better sense for the same opening, we’ll show you that option side by side with honest numbers.
- 4
The repair or replacement. We source CWS hardware through legitimate channels and use only components that protect the product approval. No generic parts that void your warranty and compromise the impact rating.
- 5
Function test and cleanup. We cycle the window or door through its full range, check compression on the weatherstripping, and run water tests where it matters. The worksite is left clean.
- 6
Company guarantee in writing. We register both warranty layers before the truck leaves the driveway. The Done Right Promise covers the work, and you’ll have it on paper. If it’s not in writing, it’s not a guarantee - it’s a conversation.
What CWS Impact Windows & Doors Costs in Boynton Beach
Here are the numbers we quote most often on CWS work in Boynton Beach:
- Seal or weatherstripping repair: $185 to $485 depending on the opening size and frame condition
- Hardware replacement (handle, lock, roller set): $140 to $380 per unit
- IGU glass replacement on a CWS 6000 or 7000 series window: $550 to $1,100 per panel
- Full impact window replacement: $800 to $1,900 installed, depending on size and series
- Impact sliding door replacement: $1,600 to $3,400 for an 8-foot CWS 8000 series configuration
What moves the price: the size of the opening, which CWS series you have, whether the frame is salvageable or needs full replacement, and permit requirements. We pull all necessary permits in Boynton Beach, and we’ll be there when we say. Call (561) 708-6771 for a free estimate with a written line-item quote.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for CWS Work
We’re an independent CWS service provider, not a factory representative, which means two things: we tell you when a repair is smarter than a replacement, and we have no quota pushing us toward the most expensive option. Dale Kessler grew up off Lawrence Road in the Meadows section of Boynton Beach, so he knows exactly what this coastal climate does to window frames, and he’s still bothered by a frame that’s plumb but not properly shimmed. Our technicians know CWS lines, and they also know Andersen, Pella, and PGT, so you’ll always get an honest comparison when it makes financial and practical sense for your home. Every job carries the Done Right Promise. We stand behind it, in writing.
FAQs
No. We are an independent CWS service provider, so we’re not bound by factory-service territory restrictions and we can usually get to your Boynton Beach home faster. What matters for your warranty is that the work is done correctly with legitimate parts, and we make sure of that on every job.
Yes. We keep the common hardware, rollers, and weatherstripping for CWS 6000, 7000, and 8000 series on the truck. For older Targa lines, some components are no longer manufactured, but we can often retrofit current CWS hardware without changing the opening or compromising the impact rating. Call (561) 708-6771 and we’ll tell you honestly what’s available before you spend a dollar.
Repair the hardware or seal if the glass is still clear, the frame is square, and the impact rating is intact. Replace when the IGU has failed, the frame shows corrosion at the corners, or the window is over 20 years old and no longer meets current code. We’ll give you both numbers on paper and let you decide. Estimates are free.
Most CWS jobs are completed in a single visit, and we schedule around your availability rather than making you wait on a window. A live person answers the phone 24 hours a day, 7 days a week, so call (561) 708-6771 and we’ll get you on the schedule.
It might, especially if the repair changes the glazing or hardware in a way the manufacturer can point to later. That’s exactly the kind of thing we help you avoid. We source the right parts and do the work clean, so your warranty stays intact and your impact rating holds. Call (561) 708-6771 for a free estimate before you attempt a repair that could cost more down the road.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After