Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterEntry & Swing Doors in Boynton Beach, FL
Replacing an entry or swing door in Boynton Beach typically costs between $1,200 and $4,500, depending on material, hardware, and whether the frame requires structural adjustment. At TruePane Windows & Doors, our Door Installation services cover the entire process, from precise measurement of your existing opening to the final weather-stripping adjustment, ensuring your door operates smoothly in our humid South Florida climate. If you are noticing gaps, binding, or signs of wood rot, call us at (561) 708-6771 for a free estimate.
We understand that a front door is more than an entryway; it is your home’s first line of defense against the elements and the most visible part of your home’s exterior. As a second-generation glazier, Dale Kessler founded TruePane on the principle that if the pane is not true, the job is not done. Whether you are dealing with a door that sticks in the summer heat or a drafty unit that lets in too much humidity, our team provides the craftsmanship required for a lasting installation. You can learn more about our broader range of services on our Door Installation in Boynton Beach page.
When You Need Entry & Swing Doors
In Boynton Beach, the combination of intense UV exposure, salt air, and heavy seasonal rains puts significant stress on entry doors. We see many homeowners wait until a minor issue becomes a security risk or a structural headache. You should consider replacement or professional adjustment if you notice any of the following:
- Binding or Rubbing: If your door scrapes against the threshold or frame, especially during the humid summer months, the door may have shifted or the frame may have settled. This is common in older Boynton Beach homes where foundation settling occurs over decades.
- Visible Light Gaps: If you can see daylight around the edges of your door when it is closed, your weather stripping has failed, and your cooling costs are likely suffering as conditioned air escapes.
- Rot or Soft Spots: Check the bottom of the door frame or the door slab itself near the threshold. South Florida moisture can cause wood to rot from the bottom up, compromising both your security and the door’s structural integrity.
- Failed Hardware: If your deadbolt or handle set is loose, sticking, or difficult to turn, it may indicate that the door is misaligned, putting unnecessary strain on the locking mechanism.
- Condensation Between Glass Panes: If your entry door has decorative glass or side-lites and you see fogging or moisture inside the glass unit, the seal has failed, and the unit likely requires replacement.
- Outdated Security: Older doors often lack the multi-point locking systems or impact-rated materials that provide true peace of mind during hurricane season.
If you are experiencing these issues, call (561) 708-6771. We provide upfront pricing and honest assessments, so you know exactly what the job entails before we start.
Our Entry & Swing Doors Process
We don’t believe in quick fixes that hide problems. Our approach is rooted in The Keystone Standard, which means we treat every opening as a unique project, not a template. Here is how we manage your installation:
- Initial Assessment and Measurement: We arrive at your home with our tools to measure every opening twice. We look for signs of structural settling and inspect the surrounding wall integrity to ensure the new door will be properly anchored.
- Manufacturer Selection: We review your options using manufacturer lines like Andersen, Pella, and Marvin. We provide side-by-side quotes on paper so you can compare the thermal performance and material durability of each option before you commit.
- Preparation and Removal: We carefully remove your old door, taking care not to damage the surrounding stucco or interior trim. We inspect the rough opening for any hidden moisture damage or wood rot that needs addressing before the new unit is set.
- Precision Installation: Our technicians set the door, ensuring it is plumb, level, and square. In our climate, this step is critical; a door that is even slightly off-kilter will bind within a season. We seal the perimeter to prevent water intrusion.
- Warranty Registration: Before our truck leaves your driveway, we register both warranty layers-the manufacturer’s warranty and our own workmanship guarantee-in writing. You are never left to handle the paperwork yourself.
- Final Walkthrough: We demonstrate the operation of your new door, test the locking mechanisms, and ensure you are comfortable with how to maintain the finish.
This process is the baseline for our Done Right Promise. If it is not done right, we make it right, with no arguing and no fine print.
Entry & Swing Doors Pricing in Boynton Beach
Pricing for entry and swing doors, including Storm Doors, varies based on the material (fiberglass, steel, or wood), the level of impact protection, and the complexity of the installation. We believe in a square deal, meaning we provide upfront pricing without surprise line items. Below are typical ranges for our services in the Boynton Beach market:
| Service Type | Estimated Price Range |
|---|---|
| Standard Replacement (Fiberglass/Steel) | $1,200 - $2,500 |
| High-Performance Impact Door | $2,800 - $4,500+ |
| Hardware and Lockset Upgrades | $250 - $600 |
| Frame Repair and Adjustment | $300 - $800 |
Please note that these are estimates. Factors such as custom sizing, sidelite additions, Arched & Custom Doors, and transom windows will influence the final cost. We offer free estimates for all projects. Call (561) 708-6771 to have a technician measure your opening and provide an accurate quote.
FAQs - Entry & Swing Doors
How much does it cost to replace a front door in Boynton Beach?
A standard replacement typically ranges from $1,200 to $4,500, though this depends entirely on the material, such as impact-rated fiberglass or steel, and whether the frame requires modification. We provide fixed, upfront pricing after we measure your specific opening, so you never have to worry about surprise costs on the final bill. Call (561) 708-6771 for a free estimate.
Is it cheaper to repair a door or replace it?
If the issue is minor, such as a loose hinge or worn weather stripping, a repair is often the most cost-effective solution. However, if the door has significant wood rot, structural misalignment, or compromised seals that affect energy efficiency, replacing the unit is a better long-term investment that prevents further damage to your home. We are happy to inspect your door and give you an honest recommendation on whether a repair will suffice or if a replacement is necessary.
Can you match the style of my existing home architecture?
Yes, we work with premium manufacturer lines like Andersen, Pella, and Marvin to offer a wide variety of styles that complement South Florida architecture, from Mediterranean to modern designs, including Pivot Doors. We bring physical samples and catalogs to your home so you can see exactly how the finish and hardware will look against your existing exterior. Because we are authorized installers for over a dozen manufacturers, we have more flexibility to find the right fit for your home.
How long does an installation take?
Most standard entry door installations are completed in a single visit, typically within one day. We arrive with all necessary materials, background-checked technicians, and the tools required to get the job done right the first time. We respect your time and ensure the job site is clean and secure before we leave.
If you are ready to upgrade your entry or swing doors, our team is ready to help. We have served local communities since 2008, and we plan to be here for the next 30. We are a company that stands behind our work, our warranty, and our promises. Call us at (561) 708-6771 to schedule your free estimate and find out why our customers trust us with their homes.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boynton Beach.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.