CWS Door Installation Nationwide | TruePane Windows & Doors

CWS Door Installation: The Boynton Beach Owner’s Guide

We install, replace, and service CWS doors throughout Boynton Beach, with most CWS door installations running between $1,800 and $6,500 depending on the door type, size, and whether you need impact-rated glass. That price includes the door, hardware, labor, and removal of the old unit. Most owners discover their CWS door has a problem the same way: it starts binding in the frame around July, or a hairline crack appears near the hinge side after a storm, or the rollers on a sliding door suddenly sound like they’re dragging gravel. By the time it’s obvious, the part has usually been failing for months, and Boynton Beach’s heat and salt air don’t give failing hardware a graceful decline.

Call (561) 708-6771

Key takeaways:

• We stock CWS-compatible door hardware, rollers, hinges, and thresholds on our trucks.
• Installed pricing in Boynton Beach runs $1,800-$6,500 for most CWS door replacements.
• We’re an independent installer, not affiliated with CWS, and we won’t pretend otherwise.
• Every CWS door install carries the Done Right Promise, in writing.

Which CWS Models This Applies To

CWS door lines cross several series, and the compatibility gotcha most Boynton Beach homeowners hit is this: CWS changed their roller housing diameter between their mid-2000s sliding door lines and their current production, so a roller that looks identical on the counter can be 3/16″ too wide for the track. We measure before we sell, every time. The main lines we work on are the CWS 7800 and 7500 sliding glass door series, the 4900 hinged patio door, and their current impact-rated CWS doors that meet Florida Product Approval for the high-velocity hurricane zone. If the CWS label is gone, look on the door edge near the strike plate or on the top rail; older CWS units often have the series stamped into the metal, not printed on a sticker.

OEM CWS parts are fine when they’re available, but lead times from the manufacturer can run three to six weeks. In many cases, a quality aftermarket equivalent matched to the correct spec, bearing count, and housing dimension does the same job at a better price. We’ll show you the side-by-side numbers on paper before we order anything. For CWS specifically, we typically recommend OEM weatherstripping and thresholds, because the aftermarket profiles for those parts rarely match the original channel well. For rollers, hinges, and handles, we’re comfortable with proven aftermarket equivalents.

Signs Your CWS Door Installation Is Failing

• The door drags or binds at the same spot every day. In Boynton Beach’s humidity, the steel reinforcement inside the stile can swell just enough to change the geometry. Once a door binds, the rollers start wearing unevenly, and you’re on a downward slope.
• The handle works but the latch won’t fully seat. This typically means the door has settled and the strike plate is no longer aligned. It’s not just an annoyance, it’s a security issue. A door that isn’t latching is a door that isn’t locked.
• You see daylight or feel air at the bottom or side of the door. That’s a failed sweep or worn weatherstripping, and in Boynton Beach it means your air conditioning is leaving the house through a three-foot-wide gap. It’s not subtle on the electric bill.
• The rollers make a grinding or ticking sound. Salt air from the Intracoastal works on the bearings. By the time you hear it, the rollers are done. They don’t recover.
• Hairline cracks near the hinge cutouts or at the bottom rail corners. This shows up most often on older CWS doors that have been in service since before the 2006 code cycle. It’s a structural failure starting, not a cosmetic blemish, and on an impact door it matters in ways we take seriously.

Replacement Cost & What’s Included

In Boynton Beach, a complete CWS door replacement typically runs from $1,800 for a basic single hinged door to $6,500 for a large impact-rated sliding unit with low-E glass and upgraded hardware. What drives the range: whether the door is an out-swing or in-swing, whether it’s impact-rated, the width (anything over 72″ starts to cost more), and whether the rough opening needs correction. Here’s the breakdown we give every CWS owner:

• Basic hinged door replacement (CWS non-impact): $1,800-$2,800
• Impact-rated hinged door: $3,200-$5,000
• Sliding door replacement (CWS non-impact): $2,200-$3,800
• Impact-rated sliding door: $3,800-$6,500
• Roller, hinge, or hardware replacement only (no new door): $180-$450 per door, parts included

Every quote includes removal and disposal of the old door, the new door, hardware, installation labor, and caulking to a standard that survives a Boynton Beach summer. We register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s not optional in our shop. If the job isn’t done right on day one, the Done Right Promise means we come back and make it right. No paperwork fight, no arguing.

DIY or Call Us?

You can safely do a few checks before you call. Watch the door move through its full travel and note where it hangs up. Check if the screws on the hinges or the roller housings are loose. Look at the threshold to see if it’s cracked or pulling away from the concrete. Those observations help us price the repair correctly on the phone.

What we don’t recommend is pulling a CWS sliding door out of its track yourself. A glass panel that size weighs more than most people expect, and a dropped panel doesn’t just break - it can cut. The same goes for an impact door with cracked glass: the laminate holds it together, but a cracked impact panel under stress is not something to handle on a Saturday morning. That’s a call to (561) 708-6771. We’ll send a technician who has taken this exact door out of this exact opening in this exact city more times than we can count.

FAQs