Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Energy-Efficient Windows in Boynton Beach: What to Know First
We provide independent CGI energy-efficient window replacement and glass service in Boynton Beach, with most jobs completed in a single visit and pricing that’s set before we start. If your CGI windows are fogged, drafty, or no longer holding the temperature line, we diagnose the specific failure and fix it without voiding the manufacturer’s warranty. This page is written for CGI owners who want straight answers about repair costs, replacement timing, and what actually fails in this climate. Call (561) 708-6771 to talk through your windows.
How CGI Products Fail - and How We Fix Them
CGI builds a substantial window, and coastal Boynton Beach puts real stress on every part of it. Here’s what we see on service calls, straight from the workbench:
- Seal failure on the Madison and Estate series. These are popular choices in Boynton Beach’s gated communities, and after a decade of salt air and summer humidity, the insulated glass unit (IGU) seals can start to go. You’ll notice fog or condensation between the panes that won’t wipe off. The fix is an IGU replacement, not a whole new window, and we order the unit to match the original glass package so the warranty stays intact.
- Fading Low-E coating on south-facing elevation glass. Homes along the Intracoastal get intense reflected UV off the water. We’ve seen original Solar Low-E glass on CGI windows lose its efficiency edge after 12 to 15 years of that exposure. The tell is furniture fading faster than it used to and a room that heats up noticeably by mid-afternoon. We replace the glass with a current Low-E package rather than replacing the entire frame.
- Stiff or warped sashes from frame movement. Boynton Beach sits on a mix of sandy soil and limestone. Houses settle, and when the rough opening shifts, a CGI frame can twist just enough to make the sash bind or leave a hairline gap at the meeting rail. We don’t just shim around it; we reset the frame square and check the reveal before reinstalling the sash.
- Argon gas depletion in double-pane units. Older CGI double-pane windows used argon gas fill for insulation. Over time, especially on windows that face afternoon sun in neighborhoods like Meadows or Canyon Lakes, that gas can leak out at the edge seal. The window looks fine, but the room holds heat differently. A simple glass inspection tells us what’s left in the unit and whether replacement glass is the right call.
- Hardware that wasn’t meant to be adjusted by a handyman. CGI uses a multi-point locking system on many of its impact-rated frames. If a lock point gets forced or a roller falls out of alignment, the whole sash can sit slightly open at one corner and you’ll feel the draft. We replace OEM CGI hardware components with correct-spec parts, not universal replacements, so the energy seal stays consistent.
Our CGI Energy-Efficient Windows Process
Here’s how a typical CGI window job runs at TruePane Windows & Doors:
- 1
Call us. A live person answers, 24/7. You describe what’s wrong. If it sounds like a simple diagnosis, we’ll set a time that works for you.
- 2
On-site inspection. Our technician measures every opening twice, checks the IGU condition, inspects the weatherstripping, and notes any frame settlement. You get a written explanation of what we find.
- 3
Parts and glass decision. We tell you which parts should be OEM CGI and where a quality aftermarket option makes better sense. We don’t hide that choice; we write it out so you see the cost difference before committing.
- 4
The work. We install replacement glass, reset the sash, re-seal, and realign hardware. Background-checked, uniformed techs do the work. No subcontractors, no day labor.
- 5
Performance check. We test the operation, check the seal, and verify the lock points. If the pane is not true, the job is not done.
- 6
Paperwork and guarantee. Before the truck leaves, both manufacturer warranty layers are registered in writing, durations stated. Then we hand you the invoice with the exact line items and our Done Right Promise on the work.
What CGI Energy-Efficient Windows Costs in Boynton Beach
Cost varies by window size, glass package, and whether you’re replacing glass only or the full frame. Here’s what CGI owners in Boynton Beach can expect to pay:
- IGU (insulated glass unit) replacement, standard Low-E: $350-$650 per window, depending on size and whether it’s single-hung or casement.
- IGU replacement with impact-rated glass: $600-$1,100 per window. Impact-rated CGI glass carries a premium and requires correct glazing tape and structural sealant.
- Sash realignment and hardware replacement: $150-$400 per window. If the frame is out of square, add shimming and re-setting, which typically adds $75-$150.
- Full-frame CGI energy-efficient window replacement: $1,200-$2,800 per window, including removal of the old frame, new flashing, and interior trim if needed.
What moves the price most is the glass spec. Triple-pane and upgraded Low-E coatings cost more up front but hold their efficiency longer in Boynton Beach’s salt and sun. Every estimate is free, and the number we quote is the number you pay. No change orders, no surprise line items. Call (561) 708-6771 for an exact written quote.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving Boynton Beach neighborhoods since Dale Kessler opened the shop in 2008, after years of learning the trade and then deciding to fix the things he saw other installers get wrong. As an independent CGI service provider, we’re not tied to a manufacturer’s script. We tell you when a repair makes sense and when replacement is the honest call. Our techs have worked on CGI frames from Coral Lakes to Chapel Hill and know which series hold up well here and which ones don’t. If a replacement line is the better value, we’ll show you side-by-side quotes from CGI, PGT, Andersen, Pella so you can compare what you’re actually buying. Then we register both warranty layers in writing, every time. If it’s not in writing, it’s not a guarantee; it’s a conversation. That’s how we work.
FAQs
No, not if the replacement glass meets CGI’s original specs and the job is done with the correct glazing materials and installation methods. We order glass to match the original gas fill, Low-E coating, and thickness, so your warranty coverage stays valid. We also register the replacement work in writing before we leave.
Most standard Low-E replacement units are available within 5 to 10 business days. Custom or impact-rated glass can take longer depending on the supplier. When we inspect, we’ll give you a real timeline in writing, not an estimate that drifts. Call (561) 708-6771 and we’ll check availability while you’re on the phone.
If the frame is square, the weatherstripping is intact, and the only problem is failed glass or worn hardware, repair is almost always the better value. If the frame has shifted or the sill is rotted, replacement makes more sense. We’ll show you the condition of your frame and let the evidence decide.
When a full-frame replacement requires a permit, yes. We handle the permit paperwork and schedule the inspection. For glass-only replacement, no permit is typically required. We’ll tell you which applies to your job and note it on the written quote.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.