Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Window Installation: The Boynton Beach Owner’s Guide
CGI window installation in Boynton Beach typically runs $85 to $185 per window for a straightforward sash or hardware replacement, and $400 to $900 per opening when the full frame needs to be pulled and reset. We stock CGI-compatible replacement parts on our trucks and can usually complete the work the same day we arrive. Most homeowners discover the problem the way you probably did: a crank that suddenly spins without moving the sash, a latch that won’t catch, or a window that’s never quite sat right in its frame since the house settled a few years after it was built.
CGI builds impact-rated windows and doors to a higher standard than most of what’s sold in Florida, so when a part fails, it’s rarely the glass. It’s almost always the hardware, the weatherstripping, or an installation that was out of square from day one. TruePane Windows & Doors is an independent service provider, not affiliated with CGI, and we’ve been matching, replacing, and installing these parts across Palm Beach County long enough to know which ones give out first.
Which CGI Models This Applies To
This guide covers the CGI product lines most common in Boynton Beach homes: the Estate Collection, the Estate Entrances, and the Classic and Sentinel Series, along with earlier models that may predate the current catalog. If your window has a CGI label on the frame, an etched logo in the corner of the glass, or a Florida Product Approval sticker still attached, we can match the part. If the sticker’s gone, don’t guess. We identify the series by the frame profile, the hinge geometry, and the hardware style, which are more reliable than memory when a house has had multiple window replacements over the years.
The practical question is always OEM versus aftermarket. CGI OEM parts carry the manufacturer’s own warranty and fit with no modification. Quality aftermarket equivalents, particularly roller assemblies and weatherstripping profiles from suppliers like CRL and Strybuc, cost 20 to 40 percent less and work well when matched correctly. The gotcha is compatibility. CGI changed its interlock profile and hinge pin sizing between certain production years, and an aftermarket roller that works in a 2008 Estate window may not fit a 2018 one. We carry both and check the fit before we leave the truck, not after the window’s apart on your floor.
We also work on Andersen, and Pella hardware for Boynton Beach homeowners who have mixed brands across their house.
Signs Your CGI Window Installation Is Failing
- The sash drags or binds when you open or close it. In coastal Florida air, the most common cause is corrosion on the roller bearings or debris packed into the track. If it binds worst in July, that’s often frame expansion, not the roller itself.
- The window locks but still rattles in wind. The nylon keeper or the lock’s strike plate has worn to the point where the sash isn’t being pulled tight against the weatherstripping. Off Ocean Avenue and near the Intracoastal, this is the first thing that announces itself during August storms.
- Condensation forms between the panes. That’s a failed seal, and on an impact window it means the laminated glass unit has lost its inert gas fill. It won’t be fixed by tightening anything; the unit needs replacement. In Boynton Beach, this rarely shows up in the dry months. It announces itself right around hurricane season.
- The crank handle turns more than it used to before the window moves. The gear inside the operator has stripped or the linkage arm has bent. This one gets worse fast once it starts.
- Water stains appear along the sill or the interior drywall after rain. On a CGI window, this usually means the installation flashing was never lapped correctly or the frame wasn’t sealed at the rough opening. The window itself may be fine. The original install wasn’t. We see this one most often in the Meadows and Renaissance Commons neighborhoods where homes went up in the early 2000s.
Replacement Cost & What’s Included
For Boynton Beach, expect the following installed ranges, which are honest numbers, not bait:
- Roller and balance replacement: $85 to $140 per sash
- Operator, crank, and lock set replacement: $120 to $185 per window
- Weatherstripping replacement (full perimeter): $75 to $125 per window
- Complete sash replacement with CGI-compatible glass: $350 to $700 per window
- Full-frame window removal and reinstallation: $400 to $900 per opening
The range depends on the series, whether the opening is second-story, and whether the original install left anything for us to correct. Every quote is line-item: the part, the labor, and the disposal, in writing before we begin. The Done Right Promise covers the workmanship, and The Keystone Standard means both warranty layers are registered on paper before our truck leaves your driveway. If the pane is not true, the job is not done.
DIY or Call Us?
There’s an honest split here. If you can’t identify your CGI series or your window shows any of the symptoms above, that’s a call to (561) 708-6771. A CGI window is an engineered impact assembly, and when a sash is lifted off its track incorrectly, the weight of a laminated glass unit can take a finger with it or crack a frame corner that wasn’t cheap. The spring-loaded balances carry enough tension to cause injury if released wrong.
What a homeowner can reasonably do is remove the screen, vacuum the track, and note exactly which part seems loose or worn before calling. That saves time. What we’d rather you not do is order a part off a blurry photo from a listing you found at 1 a.m. and hand it to us expecting it to fit. If it’s not in writing, it’s not a guarantee. It’s a conversation. We’d rather have the conversation before the wrong part is on your kitchen counter.
Call (561) 708-6771 and describe what you’re seeing. We’ll tell you straight whether it’s a quick fix or a full install, and we’ll come out prepared.
FAQs
In Boynton Beach’s salt air and summer humidity, CGI rollers, operators, and weatherstripping typically last 7 to 12 years before showing wear, with coastal homes off the Intracoastal on the shorter end of that range. Condensation between panes has no wear cycle; a failed seal is permanent from the day it fails. If your windows are approaching or past the decade mark and you hear rattling in August storms, call (561) 708-6771.
Yes, most hardware failures are repaired rather than replaced. A stripped operator, a worn roller, and a broken lock set are all repairable with the right part and no new glass. Failed seals and cracked frames are replacement jobs, not repairs. We’ll tell you which one you have before any work is scheduled.
A single part replacement, like a roller or operator, takes 30 to 90 minutes once our technician is at your home. A full-frame reinstallation typically takes 2 to 4 hours per window depending on what the original install left behind. Most jobs are completed in one visit.
We stock the most common CGI replacement parts on our trucks: rollers, operators, crank handles, lock sets, and weatherstripping profiles. If your window needs an uncommon part, we order it and give you a written timeline, not a vague estimate. Call (561) 708-6771 and we can tell you before we come out whether the part is likely already on our truck.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.