Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Window Installation in Boynton Beach: What to Know First
PGT window installation in Boynton Beach typically runs between $450 and $1,300 per opening for a full frame replacement, depending on the series and whether you’re working with a retrofit or new construction setup. Most single-opening jobs are finished in one day, and a whole-house PGT replacement usually takes two to four working days. We’re an independent PGT service provider, not a manufacturer dealer, which means we quote the labor honestly and let you decide which parts make sense for your budget instead of steering you toward whatever carries the biggest margin.
This page is for Boynton Beach homeowners who already own PGT windows or are planning to buy them and want installation done by a crew that actually knows these products. If you’ve got a PGT window that leaks, binds, fogs, or simply won’t close square anymore, call (561) 708-6771 and a live person will answer. We’ll talk through what you’re seeing and set up a time to look at it in person.
How PGT Products Fail - and How We Fix Them
PGT builds a solid window, but every product line has its patterns. After years in Palm Beach County, we know what shows up in Boynton Beach homes and why. Here’s what we see most often:
- Fogged glass on WinGuard and SpectraGuard units. The laminated impact glass holds up, but the seal between the panes eventually fails in coastal humidity. When that seal goes, you get condensation you can’t wipe off. We replace the insulated glass unit, keeping the original frame intact when it’s still square and sound. That’s usually half the cost of a full window replacement.
- Roller failures on WinGuard sliding windows. Boynton Beach sand and salt air work their way into the bottom track, and the nylon rollers PGT uses grind down over time. The window gets heavier every season until it won’t move without a fight. We swap in stainless or heavy-duty aftermarket rollers rated for coastal exposure, not the same OEM plastic that failed.
- Warped sashes on older Series 700 windows. Heat and humidity cycles take a toll on aluminum frames that have seen twenty or more Boynton Beach summers. A sash that’s bowed even an eighth of an inch won’t seat against the weatherstripping, and that’s where drafts come from. We measure the opening, confirm whether the sash can be re-glazed square or needs replacing, and give you a straight answer on paper.
- Hardware fatigue on WinGuard casement and awning units. The crank mechanisms and hinge arms PGT uses are decent, but they’re not built for daily use over two decades. When the operator strips or the hinge sags, the window won’t close tight enough to hold its impact rating. We replace operators, friction hinges, and locking hardware with parts matched to your series, and we register the repair so your warranty stays intact where applicable.
- Leaks around the rough opening on retrofit installs. This one’s not the window’s fault. When a PGT unit gets dropped into an opening that was never properly flashed, water finds its way in around the frame. We pull the trim, correct the flashing and sealant around the opening, re-set the window, and verify the drainage plane works before we put anything back together.
Our PGT Window Installation Process
Here’s exactly how a PGT installation goes with us, from first phone call to final walkthrough:
- 1
Call and talk to a person. You call (561) 708-6771, describe what’s going on with your PGT windows, and we schedule a time. No call center, no form, no waiting for someone to get back to you.
- 2
On-site measurement and diagnosis. A background-checked, uniformed technician comes out, measures every opening twice, and figures out what’s actually wrong. We check the rough opening, the condition of the frame, the hardware, and the glazing before we quote anything.
- 3
Written line-item quote. We put manufacturer lines side by side on paper so you see exactly what you’re paying for. Original PGT parts where it matters, quality aftermarket where they hold up better near salt air. No surprise line items later.
- 4
Installation day. The old unit comes out, the opening gets inspected and corrected if needed, and the new window goes in plumb, level, and square. Our founder’s rule governs here: if the pane is not true, the job is not done.
- 5
Weatherseal and operation test. We run the window through its full range, check the seal with a hose where the install allows, and confirm the drainage plane is working. You test it too, before we call it finished.
- 6
Warranty registration and cleanup. Both warranty layers get registered in writing before the truck leaves the driveway. We haul off the old window and leave the work area clean enough that you’d never know we were there, except for the window that finally works right.
What PGT Window Installation Costs in Boynton Beach
Straight numbers, because that’s what people actually want. A simple PGT single-hung replacement in a standard opening runs $450 to $750. Casement and awning windows with new hardware land between $600 and $950 per opening. Bay and bow configurations with PGT units start around $1,800 and go up depending on seat depth and roofline work. A full house of 10 to 14 PGT impact windows in a Boynton Beach ranch typically falls between $6,500 and $14,500.
What moves the price: opening size, whether the rough opening needs correction, accessibility, and whether we’re doing a retrofit or a full tear-out with new flashing. Call (561) 708-6771 and we’ll give you an exact line-item quote, in writing, before any work starts. Estimates are free, and the price on the quote is the price on the bill.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for PGT Work
Dale Kessler founded this company in 2008 out of a simple frustration: too many window installs were out of true, and too many warranties were voided by sloppy workmanship before the first summer storm. So we built the company around The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. We don’t hand you a verbal promise and hope for the best. If it’s not in writing, it’s not a guarantee, it’s a conversation.
Every PGT job carries the Done Right Promise. If it’s not done right, we make it right, no paperwork fight, no fine print. We also install Andersen, Pella, and CGI, so if PGT isn’t the right fit for a particular opening, we’ll tell you and quote the alternative side by side. A live person answers our phone 24 hours a day, 7 days a week. We sponsor county fairs and church roof funds because we plan to be in Boynton Beach thirty years from now, still answering that phone.
FAQs
PGT’s warranty covers the product itself, and proper installation by a licensed contractor is what keeps that warranty valid. We’re an independent PGT service provider, not a manufacturer dealer, which means we install to PGT’s published specifications and register your warranty in writing with The Keystone Standard. If the manufacturer warranty has a claim, you’re covered on the product side, and our workmanship guarantee covers the install side. Call (561) 708-6771 and we’ll walk you through exactly what’s in writing before you commit.
PGT window installation in Boynton Beach typically runs $450 to $1,300 per opening for full replacements, with bay and bow configurations starting around $1,800. Retrofit installs into existing frames cost less than full tear-outs, and whole-house projects of 10 to 14 windows generally fall between $6,500 and $14,500. That’s real Boynton Beach pricing, not a national average. Call (561) 708-6771 for a free, written, line-by-line estimate.
Most single PGT window installations are finished in one day. A full house of 10 to 14 windows takes two to four working days, depending on how many rough openings need correction and whether we’re working on a second-floor exterior. We’ll give you a schedule in writing when we quote the job, and we honor it. Call (561) 708-6771 if you want to lock in a date.
If the frame is square, the rough opening is sound, and the failure is a fogged pane, a stripped operator, or worn rollers, repair is usually the smarter money. If the sash is warped, the frame is corroded, or the window was never flashed correctly to begin with, replacement makes more sense. We’ll tell you which one you need and put the numbers on paper either way. Call (561) 708-6771 and we’ll come look at it, no charge for the diagnosis.
Where Boynton Beach code requires a permit for window replacement, we pull it, schedule the inspection, and make sure the job passes before we consider it done. Florida product approval matters here, especially for impact-rated openings, and we’re familiar with what Palm Beach County inspectors look for. That’s part of The Keystone Standard. Call (561) 708-6771 if you want to talk through what your specific project needs.
If your PGT windows need work, call TruePane Windows & Doors at (561) 708-6771. A live person answers, we’ll talk through the problem, and we’ll schedule a free estimate at your Boynton Beach home. Done right, in writing, from a company that plans to be here when you need us again.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.