Andersen Window Replacement Nationwide | TruePane Windows & Doors

Andersen Window Replacement in Boynton Beach: What to Know First

Andersen window replacement in Boynton Beach typically runs $850 to $2,800 per opening depending on the series, glass package, and whether you need a full frame replacement or can reuse the existing frame. Most Andersen jobs we handle in Boynton Beach are completed within one to two days per window, and we always quote the job on paper before any work begins. Our pricing sits in the middle of the Palm Beach County market because we do the work right the first time and stand behind it for 90 days with the Done Right Promise. This page is for homeowners who own Andersen windows and need straight answers about replacement, failure patterns, and what the job should cost. Call (561) 708-6771 and a live person answers, day or night.

Call (561) 708-6771

How Andersen Products Fail - and How We Fix Them

• Andersen 200 Series (Narrex and wood core): In Boynton Beach’s salt-heavy air, the vinyl cladding on the 200 Series can separate at the corners where the frame meets the sash. That gap lets moisture drip down into the wood core, which swells and binds the sash in the frame. We see this most often on east-facing homes near the Intracoastal. The fix is usually a full frame replacement rather than a sash swap, because by the time the binding shows up, the core is already soft at the corners.
• Andersen 400 Series (woodwright and tilt-wash): The 400 Series tilt-wash pins and balances wear out faster in South Florida humidity because the spring tension in the balance system loses integrity when exposed to constant moisture and salt. Homeowners report sashes that won’t stay up or that slam when tilted in. We replace the full balance assemblies with OEM Andersen cartridges when available, and if the frame itself is still square, this is often a same-day repair without a full replacement.
• Andersen Perma-Shield (older cladding): These are the windows we pull out of homes built in the 1980s and early 1990s around Golfview Harbour and Lake Boynton Estates. The Perma-Shield aluminum cladding was durable for its day, but the glazing tape Andersen used in that era dries out and fails. The result is a fogged seal between the panes. Once that seal is gone, the insulated gas is gone with it. Replacement is the only real fix, and we typically recommend a current Andersen series or a comparable line from PGT or CGI, quoted side by side on paper so you see the exact difference.
• Andersen Frenchwood gliding doors: In Boynton Beach, the rollers on Andersen Frenchwood sliders wear out from sand and grit that blows in off the coastal roads. The door starts to drag, then it jumps the track. Homeowners often think they need a whole new door, but if the frame and glass are intact, we replace the roller assemblies and rebalance the door. That saves thousands compared to full door replacement and keeps the original Andersen look.
• Andersen A-Series and E-Series (architectural lines): These higher-end lines hold up better structurally, but the exterior wood on A-Series and E-Series requires disciplined sealing and painting in our climate. We regularly see A-Series windows on custom homes in Canyon Lakes and Valencia Lakes where the bottom rail has rot because the homeowner was told the factory finish was maintenance-free. It isn’t. We replace the sash with factory-finished units and show the owner exactly which surfaces need annual attention down here.

Our Andersen Window Replacement Process

Every Andersen job starts with the same first step, and it’s the one that matters most.

1. 1
   Call and talk to a person. A live person answers at (561) 708-6771, 24/7. No phone tree, no callback form. You tell us what’s failing and we set a time that works.
2. 2
   On-site diagnostics. Our technician measures every opening twice and identifies exactly what’s failed, whether it’s in the sash, the frame, the balance system, or the glazing. We write it down so you can see it.
3. 3
   Parts decision. We lay out the options: OEM Andersen parts where the warranty and fit matter, quality aftermarket where the savings are real and the performance is equal. We never use aftermarket without telling you first. You decide on paper.
4. 4
   The replacement. We set the new unit, shim the frame properly (Dale Kessler’s father was a finish carpenter; we don’t leave a frame plumb but improperly shimmed), and seal it with materials rated for South Florida wind and rain.
5. 5
   Test everything. Sash balance, lock alignment, weatherstrip contact, and the reveal around the frame. If the pane is not true, the job is not done.
6. 6
   Registration and cleanup. We register both manufacturer warranty layers in writing before the truck leaves the driveway. We carry out the debris. The only thing left behind is the window, working.

What Andersen Window Replacement Costs in Boynton Beach

Straight numbers, because that’s what you called about.

• Sash replacement only (200 or 400 Series): $350 to $650 per sash, installed.
• Insert window replacement (reusing the existing Andersen frame): $850 to $1,400 per opening.
• Full frame replacement (common when Perma-Shield seals have failed or the wood core is soft): $1,400 to $2,800 per opening.
• Frenchwood gliding door roller and track repair: $250 to $600, depending on door weight and track condition.

What moves the price: whether the original frame is still square, what glass package you choose (impact-rated glass adds cost but may be required by code in Boynton Beach), and how many openings you’re doing at once. We do volume pricing on multi-window jobs. Call (561) 708-6771 for a free estimate, written down, no surprises on the bill.

Why Boynton Beach Homeowners Call TruePane Windows & Doors for Andersen Work

We’ve been doing this since 2008, and we were founded by second-generation glazier Dale Kessler in 2008 to fix one specific problem: installs that were out of true and warranties that got voided because nobody registered the paperwork. On every Andersen job, you get both warranty layers registered in writing before the truck leaves, and you get the Done Right Promise. If it isn’t done right, we make it right. A live person answers the phone day and night, and the technician who shows up at your door in Boynton Beach wears a uniform, has passed a background check, and knows Andersen products well enough to explain exactly what failed and what we’re doing about it. We also install and service Pella, PGT, and CGI, so if a full replacement makes more sense than a repair, we can quote the alternatives side by side on paper. We stand behind it all because we plan to be here in thirty years.

FAQs