Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Boynton Beach, FL | TruePane Windows & Doors
TruePane Windows & Doors provides independent CGI Boynton Beach Window Installation and door service across Boynton Beach, from roller and track rebuilds on Sentinel Series sliders to full-frame impact replacements in Leisureville. We are not a manufacturer-authorized dealer for CGI, which means we answer to you, not a brand rep. What sets our CGI work apart here is that we understand the insurance-driven reality of Boynton Beach: one flagged jalousie window can collapse a wind mitigation discount, and our service calls almost always trace back to salt air, 1960s rough openings, and paper that has to stand up to OIR-B1-1802. Call (561) 708-6771 for a free estimate on any CGI repair or replacement.
Why Boynton Beach Residents Choose Us for CGI Service
We have been working on CGI hurricane-rated lines long enough to know where they fail first in coastal Palm Beach County. Dale Kessler grew up off Lawrence Road in the Meadows section of Boynton Beach, and he learned early that a window that looks fine in March can fog up by July. He trained at Palm Beach State College and spent the better part of two decades measuring, glazing, and setting frames across the county before founding TruePane. We treat every Boynton Beach Door Installation and CGI window as a system: frame, seal, glass, hardware. A repair that ignores the frame-to-glass seal will fail again. A roller replacement on a CGI slider that ignores the track condition is wasted effort. We are independent, which means we can tell you plainly when a component is worth repairing and when it is not, without a manufacturer pushing a new unit.
Common CGI Windows & Doors Problems We Solve in Boynton Beach
- Fogged or clouded glass on CGI aluminum frames: Salt air from Boynton Beach’s Atlantic-facing position accelerates frame-to-glass seal degradation. We replace insulated glass units or reseal frames where the extrusion is still sound, and we are honest when a frame-level failure makes replacement the only code-compliant option.
- Binding or misaligned CGI horizontal sliders: Homes in this city were mostly built between the early 1960s and early 1990s with non-standard rough openings, so a slider that has worked for forty years can shift as the CBS framing settles. We replace rollers, rebuild tracks, and reset the frame rather than forcing a square peg into an out-of-square opening.
- Corroded locks and latches on CGI impact doors: Constant coastal humidity in Boynton Beach means hardware on impact-rated doors corrodes faster than it would five miles inland. We install marine-grade replacement hardware where needed and verify that every lock still engages properly for wind-load performance, not just convenience.
- Failed weatherstripping on CGI casement and awning windows: Decades of UV exposure in South Florida degrade weatherseals until air and water start working past them. We replace weatherstripping on the bench or on-site, but we always check for frame corrosion first, because replacing a seal on a corroded frame is a sales call, not a repair.
- Zero opening protection on original jalousie windows: In Leisureville and other 55-and-older communities along the Intracoastal corridor, louvered glass panels from the 1960s score zero on wind mitigation forms. We replace them with custom-sized CGI impact units that match the original rough openings and give inspectors something they can sign off on.
CGI Service in Boynton Beach: What Local Conditions Mean for Your Equipment
There is one fact about Boynton Beach that shapes almost every CGI service call we run, and it is this: the city holds one of the densest concentrations of 55-and-older retirement communities in Palm Beach County, including Leisureville along the Intracoastal corridor. That leaves a massive inventory of original single-pane aluminum sliders and jalousie windows from the 1960s through 1980s, and Florida’s property insurance crisis has turned this from a comfort issue into a financial emergency. Insurers are non-renewing policies or demanding proof of impact-rated openings, and fixed-income homeowners here are being pushed into full-house impact replacement whether they planned for it or not. The dominant job type in Boynton Beach is insurance-driven impact window replacement, not aesthetic remodeling. This local reality means CGI products here are judged less on how they look and more on how they perform in a large-missile wind-borne debris region, and whether the paperwork survives an insurance audit.
CGI Models & Products We Service in Boynton Beach
We service the CGI Sentinel Series, CGI Estate Collection, and CGI Targa Series, along with older CGI lines that are no longer produced but still in service across Boynton Beach. Our parts approach is straightforward: we use genuine CGI replacement parts when available for structural and impact-rated components, and we turn to high-grade aftermarket hardware for discontinued trim and weatherseals where OEM is no longer supplied. On any repair, we assess repair viability before recommending full replacement. For Boynton Beach specifically, we keep common CGI roller assemblies, lock sets, and weatherseal profiles in local stock so a service visit does not turn into a two-week wait for a part that should have been in the truck.
CGI Service Pricing in Boynton Beach
CGI window and door repair in Boynton Beach typically runs $150 to $450 for roller, track, hardware, and weatherseal work, while a failed insulated glass unit replacement runs $350 to $900 depending on size and glass package. Full-frame replacement of a standard opening with a CGI Sentinel Series impact window typically lands between $2,100 and $4,600 installed, with larger openings, custom sizing, and transom configurations pushing higher. What drives the cost in Boynton Beach is the age of the home: 1960s through 1990s rough openings are rarely standard, so custom-sized units are the rule, not the exception. Every free estimate includes a written line-item quote, both warranty layers stated in writing, and a straight answer on whether repair makes sense. Call (561) 708-6771 for an exact quote.
Serving Boynton Beach, FL - Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Boynton Beach
Replacing only your jalousie windows with CGI impact units may satisfy the immediate flagged opening on your wind mitigation form, but if other original single-pane aluminum sliders remain, they will likely be flagged on the next inspection. The insurance company is looking at the whole opening protection picture, not one window. Our crew was called to a home in Leisureville after a wind mitigation inspector flagged a single original jalousie window for zero opening protection. The homeowner had three other single-pane aluminum sliders already non-compliant. We replaced the full house with custom-sized CGI Sentinel impact windows to match the non-standard rough openings and closed the job with new OIR-B1-1802 documentation that restored the wind mit discount. The honest answer is that a partial job can buy you time, but a full-house replacement is what restores the discount. Call (561) 708-6771 for a free estimate and a straight read on what your policy actually requires.
Yes, CGI impact windows in Boynton Beach need regular cleaning and inspection of frame seals and hardware because salt air accelerates oxidation and seal degradation on aluminum frames. We recommend washing frames and tracks every three to four months with fresh water and a mild detergent, checking weatherseals at the start of every hurricane season, and lubricating rollers and lock mechanisms twice a year. A little attention keeps the large-missile certification intact. If a seal has already failed, contact us before water works into the frame.
Yes, in most cases we can retrofit CGI impact windows into original 1960s CBS rough openings without changing the structural opening. The challenge in Boynton Beach is that era’s rough openings are rarely the standard sizes that off-the-shelf units are built for, so we measure every opening twice and order custom-sized CGI Sentinel Series units where needed. Full frame replacement is a clean approach on CBS construction, and we have done hundreds of these in Leisureville and the Meadows. Call (561) 708-6771 and we will measure your openings and tell you what will work.
CGI Sentinel Series windows are designed for large-missile impact compliance, which is exactly what Boynton Beach’s position in Palm Beach County’s wind-borne debris region requires. They are engineered to take a 9-pound 2×4 traveling at 50 feet per second without penetration, and their aluminum frames hold up under salt-air exposure better than most, though no frame is immune to coastal corrosion. The key in Boynton Beach is that the install is done true, the frame is properly shimmed, and the seals are set right. If the pane is not true, the job is not done. That fixes performance, not paper.
It depends on the age and condition of the frame. A failed seal on a CGI window with a sound frame is a candidate for glass replacement, and that is typically the lower-cost fix. But if the aluminum extrusion is corroded, the frame-to-glass seal has failed, or the unit is old enough that its impact certification is questionable, replacement is the honest answer. Boynton Beach’s salt air degrades frames, not just glass, and a frame-level failure means the whole unit’s wind rating is compromised. We will tell you which path makes sense. Call (561) 708-6771 for a straight assessment, no charge.
Service Areas Near Boynton Beach
TruePane provides CGI service throughout Boynton Beach and the surrounding coastal communities, including CGI service in South Palm Beach, CGI service in Golf, Lantana, Manalapan, and Ocean Ridge. Our Boynton Beach service area covers every retirement community and CBS neighborhood from the Intracoastal to the western edges of the city, and our broader CGI sales & service work reaches across Palm Beach County.
Book Your CGI Service in Boynton Beach Today
We do not rush a CGI repair or replacement, and we do not leave a job until the pane is true and the paperwork is right. If it is not in writing, it is not a guarantee, it is a conversation. Call (561) 708-6771 to schedule your free estimate, and we will walk you through exactly what your CGI windows and doors need. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boynton Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.