Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Palm Beach
Sliding and patio door work in Palm Beach costs more than inland because the salt air decides the hardware before the schedule does. A standard interior-market aluminum track will oxidize and bind within five to seven years here, and we replace those failed tracks every month. Call (561) 708-6771 and we’ll give you a straight answer on what your doors actually need, what it costs, and what the Town will approve. We’ve been doing this long enough to know there’s a right way and a cheap way. The cheap way costs more by year eight.
Our Sliding & Patio Doors division handles everything from a single corroded track replacement to full panoramic slider systems on oceanfront estates. We stock marine-grade rollers, stainless jamb hardware, and NOA-certified impact glazing so Palm Beach homeowners aren’t waiting weeks on backordered parts.
Why TruePane Windows & Doors Is Palm Beach’s Preferred Sliding & Patio Doors Company
We’re an authorized installer for more than a dozen manufacturer lines, including PGT. That matters here because ARCOM – the Town of Palm Beach’s Architectural Commission – will reject a fully code-compliant impact door if the frame looks too modern for a Mizner-era estate. Most installers learn that lesson the hard way. We learn it once and plan around it from the first measurement.
Every technician who walks on your Palm Beach property is background-checked and uniformed. They measure every opening twice. They register both manufacturer warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s not a slogan. It’s the reason Dale Kessler founded this company in 2008 with years of glazing trade behind him: out-of-true installs and voided warranties are problems we fix permanently.
The Done Right Promise covers every job. If it’s not done right, we make it right without paperwork fights. A live person answers the phone 24/7, not a voicemail tree. When you call about a slider that’s jumped its track off South Ocean Boulevard, someone picks up.
Our Sliding & Patio Doors Services in Palm Beach
Patio Sliding Doors
Standard patio sliders in Palm Beach see what most doors never see: constant salt aerosol, hurricane-driven rain, and 40% higher wind pressures than inland zones. We install replacement sliders with stainless steel rollers, marine-grade weatherstripping, and butyl flashing tape behind every mounting point. A typical vinyl impact-rated patio slider replacement runs $2,800 to $5,500 installed, depending on opening size and whether ARCOM review applies.

Panoramic Sliding Systems
For homes along the Lake Worth Lagoon or on the ocean side, panoramic sliders open a wall to the view. In Palm Beach these are usually 12 to 20 feet of glass that has to pass two separate approvals: Miami-Dade HVHZ impact standards and ARCOM’s aesthetic character review. We specify bronze-anodized or custom-painted frames that read as period-appropriate, with muntin profiles that match the original 1920s character. These systems run $9,000 to $22,000 installed here, with the spread driven by frame finish, glass spec, and track hardware.

Heavy-Duty Sliding Doors
On a narrow barrier island with Atlantic exposure, a heavy panel on a cheap track is a liability. We see it all the time: powder-coated aluminum tracks that looked fine at install and started pitting within five years. Heavy-duty sliders for Palm Beach homes need hot-dip galvanized jamb hardware and track systems rated for repeated salt exposure. If you live near Phipps Ocean Park or in the Estate Section, this is the minimum spec you should accept. Expect $5,000 to $12,000 installed.

Pocket & Barn Doors
A pocket door in a 1920s Mediterranean Revival house means opening a stucco wall that was never designed for a cavity. We do it correctly, with added shear framing that keeps the wall stable in a wind event. A pocket slider in Palm Beach costs more than the same door inland because you’re modifying historic structural walls while meeting current HVHZ load paths. $4,000 to $9,000 is the honest range depending on whether you’re converting a swing door or creating a new opening.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach
We service and install PGT, Jeld-Wen, Simonton, and Ply Gem, among others. Because we install these lines daily across Palm Beach, we keep the common wear parts in local stock: stainless rollers, marine-grade seals, and replacement tracks sized for these specific manufacturers. That means when your PGT slider starts binding, we’re not waiting on a warehouse in Texas. If you have a door from a manufacturer we don’t carry, we’ll tell you honestly whether it’s repairable or whether replacement makes more financial sense. Either way you get a written answer, not a sales speech.
Common Sliding & Patio Doors Problems We See in Palm Beach Homes
- Salt-pitted aluminum tracks that bind. The Atlantic salt spray oxidizes powder-coated aluminum tracks within five to seven years. Rollers begin to drag, then panels jump the track. It’s the single most common failure we replace in Palm Beach, and it’s why we specify marine-grade stainless on anything within a mile of the beach.
- Rusted jamb-to-track screws allowing wind-driven rain intrusion. Standard stainless steel screws can’t handle Palm Beach’s salt load. They corrode at the track interface, loosen over time, and let water past the flashing tape. We use butyl flashing tape and hot-dip galvanized hardware on every exterior mount.
- Fogged impact-rated glass units with failed edge seals. Impact glass actually makes this worse when it’s not built with marine-grade edge seals. Salt crystallization creates microcracks in the seal, the argon escapes, and the unit loses its insulating performance within two to three years. The door isn’t defective; it was spec’d for an inland market.
- ARCOM rejections on doors that pass every building code. This one’s specific to Palm Beach. A door can pass Miami-Dade HVHZ testing and still get rejected because the frame profile, muntin pattern, or glass reflectivity doesn’t match the original property character. We handle the ARCOM paperwork before the permit goes in, so you’re not paying to reorder doors you already bought.
Pricing for Sliding & Patio Doors in Palm Beach, FL
A standard patio sliding door replacement in Palm Beach runs $2,800 to $5,500 installed. Heavy-duty sliders run $5,000 to $12,000. Panoramic systems start around $9,000 and go up from there depending on width, frame finish, and glazing. Pocket door conversions range from $4,000 to $9,000.
The difference between coastal-spec and inland-spec is real money, but it’s not markup. It’s the cost of marine-grade rollers instead of standard, stainless jamb hardware instead of coated, and butyl flashing instead of builder tape. The inland-spec door costs less upfront and more by year ten. We’ll quote both ways if you want to see the numbers side by side. Call (561) 708-6771 for a free estimate. Written line-item quotes, fixed pricing, no change orders.
We Also Serve Cities Near Palm Beach
TruePane serves Palm Beach and the surrounding communities including West Palm Beach, Greenacres, Royal Palm Beach, and Wellington. The spec changes when you cross the bridge inland, but the standard of work doesn’t. Same crew, same warranty, same phone number.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Palm Beach
Yes, if your property falls under ARCOM review. ARCOM can reject a Miami-Dade NOA-certified impact door because the frame profile or glass reflectivity doesn’t match the original 1920s Mediterranean Revival character. That means you need an installer who submits ARCOM paperwork before ordering doors, not after. We walk every Palm Beach client through the ARCOM muntin profile and finish approval up front, because ordering a $30,000 slider that gets rejected at permit is a mistake nobody should make twice. Call (561) 708-6771 for an exact quote and we’ll check your ARCOM status at no cost.
Salt air. Palm Beach is a barrier island with Atlantic exposure on one side and the Intracoastal on the other, and the salt aerosol corrodes standard hardware at roughly three times the rate seen five miles inland in West Palm Beach. We specify marine-grade stainless rollers, hot-dip galvanized jamb hardware, and butyl flashing tape behind every exterior mount. A door spec’d for West Palm Beach will work for a while. In Palm Beach it fails in under a decade.
Yes, but it requires structural modification to the stucco wall and additional shear framing to keep the wall stable in a hurricane wind event. We’ve done pocket doors in Mizner-era homes from the Estate Section to Phipps Ocean Park. It’s not a simple retrofit, and it will trigger both building permit and likely ARCOM review, but we handle both. Expect $4,000 to $9,000 depending on the wall.
Usually not defective, but incorrectly spec’d. Impact-rated glass units need marine-grade edge seals in Palm Beach. Salt crystallization creates microcracks in standard edge seals, the argon escapes, and the unit fogs within two to three years. If your door is under warranty, we’ll register the claim properly. If it’s not, we’ll replace the insulated glass unit with a marine-spec seal so it doesn’t fog again. Call (561) 708-6771 and we’ll tell you what you’re working with.
We flash it properly. On a 1930s Addison Mizner estate off South Ocean Boulevard, we replaced a corroded steel casement with a custom Marvin sliding door using a bronze-anodized aluminum frame milled to match the original arched transom, impact-rated laminated low-E glass, and marine-grade stainless rollers. The track had seized from salt air in under a decade, so we installed hot-dip galvanized jamb hardware and butyl flashing tape behind every mounting point. The door passed ARCOM before the permit even went in. That’s what done right looks like.
If you live in Palm Beach and your sliding or patio door is binding, leaking, fogging, or up for ARCOM review, call (561) 708-6771 today. Free estimates. Written line-item quotes. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach with years of glazing craft behind the work.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After