Custom Windows & Doors in South Palm Beach - Free In-Home Measure, Written Price

Fast, Reliable Custom Windows & Doors Across South Palm Beach

Custom windows and doors in South Palm Beach aren’t a one-size-fits-all job. This town is a narrow barrier island strip where nearly every building is a 1970s or 1980s condo tower facing salt air from the Atlantic on one side and the Intracoastal on the other. That double exposure eats aluminum frames faster than almost anywhere in Florida, which means replacements here have to meet Palm Beach County’s high-wind-zone code and survive the corrosion your original 1980s windows never really stood a chance against. We’re TruePane Windows & Doors, and we’ve handled enough South Palm Beach condo approvals, board packet submissions, and pitted-frame replacements to know the process cold. Call (561) 708-6771 for a free estimate on Custom Windows & Doors that actually get documented, permitted, and installed right.

Call (561) 708-6771

Key takeaways:

• South Palm Beach replacements almost always require Florida Product Approval NOA documentation submitted to the condo board before you sign a contract.
• Impact-rated glazing is not optional here. Palm Beach County’s wind zone demands protected openings.
• We register both manufacturer warranty layers in writing and back the workmanship with a Done Right Promise.
• Call (561) 708-6771 and a live person answers. No voicemail tree, no call center.

Why TruePane Windows & Doors Is South Palm Beach’s Preferred Custom Windows & Doors Company

We’ve been doing this work since 2008 across South Florida, and the difference in South Palm Beach comes down to process. A single-family house in Boynton Beach doesn’t have a condo board reviewing your product line before you even get a quote. Here, you do. We submit Florida Product Approval NOA documentation to the board’s property manager up front, quote from the association’s pre-approved manufacturer lines, and get the permit pulled before the glass ever arrives. We’ve seen what happens when that step gets skipped: a homeowner pays for a beautiful impact window, the board rejects it weeks later, and the whole thing has to come out and get reinstalled with a different product. That’s an expensive education. We make sure it doesn’t happen to you.

Beyond the board paperwork, we know the buildings themselves. The towers along South Ocean Boulevard weren’t built with modern flashing details. The jambs are often pitted, the original anchor screws corroded, the seal planes broken down. We don’t just swap glass into a rotted opening. We pull the frame, inspect what’s behind it, and rebuild the rough opening so the new unit actually seals. Our crews are background-checked, uniformed, and trained to work inside occupied condo units the way they’d work in their own mother’s kitchen. Dale Kessler founded this company on a rule that’s still on the whiteboard: if the pane is not true, the job is not done.

We’re an authorized installer for more than a dozen manufacturer lines, including PGT, Ply Gem, and CGI. That matters in South Palm Beach because most boards have short lists. We quote side by side on paper so you can see exactly what each line costs and what each warranty covers. No fuzzy verbal promises. No missing line items when the bill comes. Call (561) 708-6771 and talk to a person who knows this island’s buildings.

Our Custom Windows & Doors Services in South Palm Beach

Impact-Rated Sliding Glass Doors

Sliding glass doors in South Palm Beach condos take abuse from two directions: ocean spray from the east and Intracoastal humidity from the west. Original 1970s and 1980s tracks were typically uncoated aluminum, and by now they’re pitted, binding, and leaking air even when the door is closed. A replacement sliding door in a South Palm Beach tower runs roughly $3,800 to $8,500 installed, depending on panel width, finish, and whether the board’s pre-approved list includes the line you want. Every quote we write includes the NOA documentation package for board submittal, the county permit fee, and removal of the old frame so we can inspect the rough opening before the new track goes in. We don’t install over pitted metal. That’s how you get a track that fails in three years even though the glass is brand new.

Custom Shape Windows

Older South Palm Beach buildings often have unique openings: radius transoms over balcony doors, angled corner lites, semicircular units that nobody stocks off the shelf. Custom shape windows are exactly what they sound like: built to the opening, not adapted to it. For South Palm Beach condos, custom shape windows typically run $1,800 to $5,500 per unit depending on geometry, glass package, and whether the board requires a specific manufacturer. We measure twice, quote from approved lines, and register both warranty layers before the truck leaves your building’s loading dock.

Architectural Grilles & SDLs

If your South Palm Beach building has a specific aesthetic, the board will care about sightlines. Simulated divided lites, or SDLs, give a new impact window the same divided look as the original 1980s aluminum frame without sacrificing wind-load performance. Architectural grilles and SDLs typically add $180 to $450 per opening depending on grille profile, finish, and whether they’re applied to the interior, the exterior, or both. We coordinate with the board’s architectural review committee so the replacement matches the rest of the elevation. Boards notice when a new window doesn’t match. We make sure they never have to ask.

Commercial Storefront Glazing & Curtain Wall Systems

South Palm Beach’s commercial spaces, lobbies, and community rooms sit in the same salt-air corridor as the residential towers above them. Storefront glazing and curtain wall systems here need finishes rated for marine exposure, not the inland aluminum package a generic supplier might default to. A commercial storefront replacement in South Palm Beach typically runs $120 to $280 per square foot installed, depending on the system, sightlines, and wind-load requirements. Curtain wall work runs higher, $180 to $400 per square foot, because the engineering and anchoring requirements are more demanding. We pull the permit, submit the NOA package, and coordinate with building management so common-area work doesn’t shut down your lobby longer than it has to. Call (561) 708-6771 to get a line-item quote on the system your building actually needs, not the one a supplier has in stock.

Trusted Brands We Service in South Palm Beach

We install and service more than a dozen manufacturer lines, including PGT, Ply Gem, and we’re an authorized installer for each. That authorization matters here. When a South Palm Beach condo board asks for proof that the installer is factory-certified on the specific line they’ve approved, we hand them the certificate. We also keep local stock on common hardware and parts for these brands so a track repair, roller replacement, or grille repair in a South Palm Beach unit doesn’t sit waiting on a shipment from a regional warehouse. If you’re not sure which manufacturer your board has pre-approved, call (561) 708-6771 and we’ll walk through the list with you. Custom Windows & Doors in South Palm Beach don’t have to be a guessing game.

Common Custom Windows & Doors Problems We See in South Palm Beach Homes

• Oxidized original aluminum frames - The original single-pane aluminum windows and sliders in South Palm Beach’s 1970s and 1980s towers were never designed for decades of ocean spray from the east and Intracoastal salt from the west. The frames pit, the corners lose seal, and the glass fogs permanently. In South Palm Beach, this isn’t a cosmetic issue. Pitted frames leak air and water into the wall cavity during a wind event, which is exactly what impact-rated replacements are supposed to prevent.
• Condo board rejection after installation - We see this too often: a homeowner replaces a sliding door with impact glass, the board never received the Florida Product Approval NOA for that specific product line, and the unit gets a violation letter. The fix is removal and replacement with an approved line. That’s a double expense nobody needs. We submit the NOA packet before the contract is even signed.
• Sliding door tracks that bind and leak - South Palm Beach’s salt air glazes over uncoated aluminum tracks within a few years. The door starts sticking in July, then the track pitting lets water ride into the wall during a heavy storm. Replacing the glass doesn’t fix the track. We replace the entire door assembly, including the sill and jamb, so the new unit seals true.
• Missing or unregistered warranty paperwork - A lot of Florida homeowners have impact windows but can’t prove they’re compliant because the permit was never pulled or the NOA was never filed with the county. When it’s time to renew insurance or sell the unit, the paperwork isn’t there. We register both manufacturer warranty layers in writing and provide a compliance letter you can file with your insurance carrier and the condo association.

Pricing for Custom Windows & Doors in South Palm Beach, FL

We Also Serve Cities Near South Palm Beach

TruePane Windows & Doors serves South Palm Beach and the surrounding communities including Boynton Beach, Golf, Lantana, and Manalapan. If you’re just across the bridge or a few blocks south, the same compliance process applies, and the same crew shows up. The work is identical. The paperwork is identical. The only thing that changes is the address on the permit.

FAQs - Custom Windows & Doors in South Palm Beach