Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Repair in Boynton Beach: What to Know First
We repair Therma-Tru door and window roof assemblies throughout Boynton Beach as an independent Therma-Tru service provider, not a factory-authorized dealer. Most roof repair jobs on Therma-Tru units in this area run between $240 and $520 depending on the series and what failed, and we can usually have a technician out within a few days of your call. If you own a Therma-Tru door with a roof, transom, arched top, or integrated sidelight assembly and water is getting in around the frame, call us at (561) 708-6771 for a straight answer and a free estimate.
This page is written for Boynton Beach homeowners who bought a Therma-Tru entry system years ago and now have a leak, rot, seal failure, or roof cap problem they do not want to chase twice. Dale Kessler grew up in the Meadows section of this city and has been working on door and window rough openings across Palm Beach County for the better part of two decades. We know which Therma-Tru assemblies hold up in our climate and which ones do not.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid door, but the roof assembly above it is where the trouble starts in coastal Florida. Here is what we see most in Boynton Beach, by series:
- Therma-Tru Classic-Craft and Fiber-Classic arched roof caps: The decorative roof cap is set in a channel that depends on a thin bead of caulk to stay watertight. South Florida’s afternoon sun bakes that caulk until it cracks and pulls away, usually within four to six years. We remove the old cap, clean the channel down to bare substrate, re-bed the cap with a marine-grade sealant, and run a continuous water test before we call it done.
- Therma-Tru Slim-Line transom and roof assemblies: These narrow glass-topped units rely on a drain channel behind the glass. In Boynton Beach, that channel clogs with fine windblown sand and salt film from the Intracoastal. Water backs up, then leaks through the interior seam. The fix is not just cleaning the channel; we drill supplemental weeps at the low points and verify the slope so water exits where the manufacturer intended.
- Therma-Tru multi-point lock rail misalignment after storm settlement: The roof assembly’s weight, combined with slab movement common in Boynton Beach’s sandy soil, pulls the header out of true. The door still closes but the top strike binds. We re-shim the header, reset the roof frame, and re-align the lock rail so the door swings without forcing.
- Therma-Tru door-to-roof flashing failure on south-facing exposures: South-facing entries on homes in Leisureville and Golfview Harbour catch the worst of the summer sun. The original flashing was often installed by a builder’s crew years ago and is now sun-damaged aluminum. We replace it with proper step flashing, re-wrap the nailing flanges, and detail the top cap so water cannot find the rough opening.
- Therma-Tru Fusion frame corner joints pulling apart: The composite frame on some Fusion units separates at the mitered top corners. When that happens, the roof assembly shifts and the glass in the sidelights or transom loses its seat. We disassemble the frame top, re-glue the corner joints with structural adhesive, and re-secure the roof assembly before re-glazing.
Our Therma-Tru Roof Repair Process
We do not treat a Therma-Tru roof repair as a guess-and-caulk job. Here is how a typical call goes, from your first phone conversation to the truck leaving your driveway:
- 1
Call us at (561) 708-6771. A live person answers, day or night. You describe the leak or damage; we ask which part of the door or roof is wet, when you first noticed it, and whether any repair was attempted before.
- 2
On-site diagnosis. We inspect the roof cap, flashing, frame joints, glass channels, and the rough opening above the header. We look for the actual water path, not just the wet spot you found. On a Therma-Tru with an arched top, we also check the cap’s caulk channel depth to determine whether this is a first-time fix or a repeat failure.
- 3
Parts decision, in writing. If a part needs replacing, we tell you whether true OEM Therma-Tru parts are available and what they cost, and whether a quality aftermarket component will perform as well for less. If it is not in writing, it is not a guarantee, it is a conversation. We put the scope and the number on paper before any work starts.
- 4
The repair. We re-bed cap channels, replace flashing, re-shim headers, re-glaze transom glass, or replace roof components as agreed. We measure every opening twice and torque every fastener to spec, because a roof assembly that shifts after a repair is the same job all over again.
- 5
Water test and inspection. We run water across the repair with a controlled hose test and check the interior with a moisture meter. No test, no handoff. Then we register any applicable manufacturer warranty layer in writing before we leave.
- 6
Cleanup and the Done Right Promise. We remove old caulk, flashing, and packaging. We walk you through what we fixed and what the warranty covers. Then the job is covered by our Done Right Promise: if it is not done right, we make it right.
What Therma-Tru Roof Repair Costs in Boynton Beach
We quote every Therma-Tru roof repair as a line-item price before work begins. Here are the ranges we see most often in Boynton Beach:
- Roof cap re-bed and re-caulk (Classic-Craft, Fiber-Classic, Smooth-Star): $240 to $360
- Header re-shim and lock rail re-alignment: $180 to $280
- Transom or sidelight glass re-bed and re-glaze (Slim-Line or similar): $260 to $420
- Complete door-to-roof flashing replacement: $380 to $520
- Fusion frame corner joint repair with structural adhesive: $220 to $340
- Full roof assembly replacement (parts and labor, depending on series and size): $650 to $1,150
What moves the price is the series you own, whether the damage is first-time or a repair attempt gone wrong, and how much of the surrounding frame needs rework. We do not pad the bill and we do not add surprise line items. Call (561) 708-6771 and we will give you an exact quote, on paper, before anything gets touched.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We have been serving local communities since 2008 through a heritage of craft Dale Kessler picked up at Palm Beach State College and sharpened across two decades of measuring, glazing, and setting frames in Palm Beach County. We are not a franchise crew that cycles through towns. We hire local people, train apprentices into journeymen, and plan to be in Boynton Beach thirty years from now.
Our technicians arrive uniformed and background-checked. They measure every opening twice. They show you side-by-side quotes for manufacturer lines when a replacement matters. And they register both warranty layers in writing before the truck leaves the driveway. If your Therma-Tru roof assembly is beyond sensible repair and you decide to look at another brand entirely, we service and install PGT, CGI, CWS, and ES Windows as well. We will not steer you somewhere we cannot stand behind later.
FAQs
An independent repair generally does not void a Therma-Tru warranty, provided the work is done to the manufacturer’s installation standard and the correct parts are used. We document every repair, note any OEM versus aftermarket parts decision in writing, and register any remaining manufacturer warranty layer so your coverage is clear. Call (561) 708-6771 if you want us to look at your specific unit before you decide.
In most cases yes, though lead times on factory roof caps and frame components have stretched to four to six weeks in recent years. We tell you the OEM price and lead time alongside any qualified aftermarket alternative, and we never substitute a part without your written sign-off. If we can keep your door weather-tight while parts come in, we will say so plainly.
For most Boynton Beach homes, a roof assembly repair makes sense when the door panel, hinges, and frame are still sound. If rot has reached the rough opening or the frame is out of true from storm settlement, replacement starts to look cheaper over time. We give you both numbers side by side so you can decide with real figures, not a sales pitch.
We typically schedule diagnostic visits within a few business days. If water is actively entering your home during a storm, call (561) 708-6771 and we will tell you over the phone what you can do to slow the leak until a technician arrives. A live person answers every call, around the clock.
When a permit is required in Boynton Beach, we handle it. Roof assembly work that touches the rough opening or structural header often falls under the city’s building code, and we would rather pull the permit and pass the inspection than leave you holding a problem at sale time. It is part of doing the job square.
Call (561) 708-6771 for a free estimate on any Therma-Tru roof repair in Boynton Beach. We will show up, look at the failure honestly, and put what needs to happen in writing before we touch anything.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.