Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Impact Windows in Boynton Beach: What to Know First
Therma-Tru impact windows in Boynton Beach typically run between $900 and $2,800 per opening installed, depending on the series, size, and whether we’re replacing the full frame or retrofitting into an existing opening. Most Therma-Tru impact window jobs take one day per three to five openings, and we provide free estimates with line-item pricing before any work begins. If you own a Therma-Tru entry door or window system and need impact-rated replacements or repairs in Boynton Beach, call (561) 708-6771 and a live person answers, day or night.
This page is for homeowners in Boynton Beach and nearby areas who already know the Therma-Tru name and want straight answers about impact windows, repair costs, and what goes wrong with these units in our salt air and storm seasons. We’re an independent Therma-Tru service provider, not a manufacturer-authorized dealer, which means we recommend what’s right for your house, not what a factory rep needs moved this quarter.
How Therma-Tru Products Fail - and How We Fix Them
After four decades of glazing work across Palm Beach County, we’ve learned that Therma-Tru builds a solid door and window frame, but certain things go wrong here that don’t show up in the manufacturer’s brochure. Here’s what we see on Boynton Beach jobs:
- Sill rot on Therma-Tru Slim-Line and Classic-Craft entry door systems. The southern exposure homes in Boynton Beach, especially along Federal Highway and in the Meadows, get driven rain in summer storms that sits against the composite sill. When the original installer didn’t slope the sill pan correctly, water wicks back under the threshold. We pull the unit, rebuild the rough opening with proper flashing, and reset the frame so the sill drains away from the house, not into it.
- Failed IGUs in Therma-Tru’s early-batch impact units. Homes built in the 2005-2009 wave along Quantum Boulevard and around Hunters Run got impact-rated Therma-Tru windows where the insulated glass seals started failing years before anyone expected. You’ll notice condensation between the panes that never clears. We replace the glass pack with a current Miami-Dade approved unit and register the glass warranty in writing before we leave.
- Sticking or binding sashes on Therma-Tru casement impact windows after salt-air exposure. The hardware on these units is decent, but Boynton Beach’s salt air and humidity corrode the crank mechanisms faster than inland sites. We replace the operator and hinge assembly with corrosion-resistant hardware rather than forcing the original parts.
- Frame sag on wide Therma-Tru sliding door frames with impact glazing. The glass is heavy, and if the header wasn’t properly load-rated during the original install, the frame settles and the door starts dragging. Dale Kessler often spots this on Canal Drive homes where the slab has shifted a quarter inch over decades. We re-level the frame, re-shim it properly, and fix the header so the weight of the impact glass doesn’t pull the opening out of square again.
- Leaking at the head jamb on Therma-Tru impact windows after interior gutter blow-off. Boynton Beach gets those fast summer squalls that come in sideways. If the drip cap was installed flat instead of sloped, water runs back under it and stains the interior drywall above the window. We remove the cap, slope it properly, reflash, and usually fix the drywall damage too.
Our Therma-Tru Impact Windows Process
We’ve done enough Therma-Tru jobs in Boynton Beach that the process is predictable. Here’s how it goes from first call to final walkthrough:
- 1
Call and talk to a person. You call (561) 708-6771 and describe the problem. A live person answers, 24/7. No voicemail tree, no callback form.
- 2
We come out and measure twice. Our technicians are background-checked and uniformed. They measure every opening twice, check the rough opening for shim gaps or water damage, and document what’s there before touching anything.
- 3
We quote on paper. You get side-by-side line items: OEM Therma-Tru parts, quality aftermarket where it makes sense, and the labor to install either. Durations and warranty layers stated in writing. If it’s not in writing, it’s not a guarantee, it’s a conversation.
- 4
We do the work in one visit. Most Therma-Tru impact window replacements are done the same day we arrive, unless we’re doing a full multi-opening retrofit that spans multiple days. No surprise line items show up on the bill.
- 5
We test and register everything. We cycle every sash, check the locking points, and register both manufacturer warranty layers before the truck leaves your driveway. If the pane isn’t true, the job isn’t done.
- 6
Done Right Promise. If anything slips after we leave, we come back and make it right. No paperwork fights, no arguing.
What Therma-Tru Impact Windows Cost in Boynton Beach
We give straight numbers because that’s what you’re calling for. Here’s what Therma-Tru impact window work runs in Boynton Beach right now:
- Single impact window replacement (glass pack only): $600-$1,400, depending on glass package and size.
- Full-frame impact window replacement (standard bedroom or bath opening): $900-$1,800 per opening.
- Therma-Tru casement or awning impact window (full unit): $1,200-$2,800 per opening. Hardware replacement is cheaper than glass replacement, and we’ll tell you which one you actually need.
- Therma-Tru impact sliding door or entry door with sidelites: $3,500-$7,500 installed, depending on whether the frame needs rebuilding.
- Emergency board-up or temporary seal after a storm: $200-$500, credited toward the permanent repair.
What moves the price: whether the rough opening is rotted, whether you need OEM glass packs or can use equivalent aftermarket, and whether your home is in a coastal wind zone that requires higher-design-pressure ratings. Call (561) 708-6771 and we’ll price your specific openings during a free estimate.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve been serving local communities since 2008 through Dale Kessler’s craft tradition. Dale grew up off Lawrence Road in the Meadows, learned the trade at Palm Beach State College’s building construction program, and spent two decades measuring and glazing across Palm Beach County before founding TruePane in 2008. His father was a finish carpenter, and Dale still gets bothered by a frame that’s plumb but not properly shimmed. Close enough isn’t something we charge people for.
Our techs know Therma-Tru units, but we’re also authorized installers for PGT, CGI, CWS, and ES Windows. If a Therma-Tru part isn’t the right fix for your opening, we’ll show you the comparison on paper and let you decide. We register both warranty layers in writing, stand behind our work for 90 days with the Done Right Promise, and answer the phone when you call. Seniors and veterans get a permanent 5% discount. That’s a square deal, and it’s been our standard since the first day we opened the door.
FAQs
Yes, but only if the warranty layers are registered in writing at installation. Many Boynton Beach homeowners find out too late that the previous installer never filed the paperwork, leaving them with a voided glass warranty. We register both manufacturer warranty layers while our truck is still in your driveway and we give you copies with durations stated. Call (561) 708-6771 and ask us to check your current coverage.
Yes. The seal has failed, and the glass pack needs replacement, not just a surface repair. In Boynton Beach’s humidity, that condensation only gets worse. We replace the IGU with a current impact-rated glass package and register the new warranty in writing. Estimates are free.
If the frame is solid and the opening is square, a glass pack or hardware replacement usually does the job for another decade. If the frame is rotted or the rough opening has shifted, replacement is cheaper long-term than repeated patchwork. We’ll tell you which one applies to your opening after the free estimate.
Most single-window jobs can be scheduled within a few days to a week, and the work itself is usually done in one visit. If a storm has left you with no functional weather barrier, call us right away and we’ll board up or seal the opening while we order parts. A live person answers the phone no matter the hour.
No. We quote on paper before we touch your window, and we do not surprise you with line items you didn’t approve. The only thing that changes a price is a hidden condition discovered after we open the wall, and we’ll tell you before we proceed. That’s the square deal.
Call TruePane Windows & Doors at (561) 708-6771 for a free estimate on Therma-Tru impact windows in Boynton Beach. A live person answers, and we’ll walk you through what’s actually wrong, what it costs, and what we’ll do about it, in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.