Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Window Installation: The Boynton Beach Owner’s Guide
If you have a Mr-Glass window with a failed frame, broken balance, or blown seal, we install replacement parts in Boynton Beach homes for a typical installed cost of $225 to $575 per window, and most jobs are done in a single visit. The part itself usually isn’t the expensive part. What you’re paying for is getting the window set true, shimmed correctly, and sealed so you don’t see the same failure again in three years.
Most Boynton Beach homeowners find us after noticing a draft they can’t locate, a window that suddenly won’t stay up, or condensation trapped between panes that won’t wipe away. That last one always shows up around July and August, when the humidity sits heavy and the air conditioning runs hard. Something in the installation is no longer doing its job, and the question is whether the fix gets the window back to what it was or just patches it enough to get through hurricane season.
Which Mr-Glass Models This Applies To
Mr-Glass windows installed in Florida homes are typically single-hung and horizontal slider models built around a five-eighths-inch insulated glass unit. The frames are usually aluminum or vinyl, and the single-hung models use block-and-tackle balances rather than spiral balances, which matters when it’s time to order parts. We’ve seen homeowners carry in a balance they pulled from another window in the house and find out the springs don’t match because the second window was a different series from a different install year. The label printed on the header of the panel, or etched into the corner of the glass, will tell us the series; without it, we measure the visible glass and the balance length to match the right part.
Mr-Glass has changed suppliers over the years, and parts from one decade don’t always interchange with parts from another. We stock the common OEM balances, rollers, and weatherstripping on our trucks. When a Mr-Glass OEM part has been discontinued, we quote a quality aftermarket equivalent with the same weight rating and profile on paper, side by side with any OEM option, so you can see exactly what you’re buying and why it fits.
Signs Your Mr-Glass Window Installation Is Failing
- The window won’t stay open and drops or slams shut. The block-and-tackle balance has lost spring tension or the cord has snapped. This is the most common Mr-Glass failure we see in Boynton Beach, and it usually means the balance needs replacing, not the whole window.
- Fog or moisture between the panes that won’t clean off. The IG unit’s seal has failed and the desiccant inside is saturated. In Boynton Beach’s humidity, a failed seal shows up faster than it does in drier climates because the windows are always fighting moisture from both sides.
- The panel sticks, binds, or scrapes when you slide or tilt it. Rollers on sliders wear flat, or the frame has shifted out of square over years of heat and settling. Forcing the panel just chews up the track and makes the eventual repair costlier.
- Air leaks you can feel at the sash edges, even when the window is locked. Weatherstripping compresses and loses its shape with age and sun exposure, and a gap the width of a dime is enough to spike your cooling bill every month.
- The lock doesn’t engage or the window won’t seal tight. The keeper and latch may be misaligned from frame movement, or the hardware has worn past function. On a window that won’t lock in Boynton Beach, that’s a security issue as much as a comfort issue.
Replacement Cost & What’s Included
For Mr-Glass window installation repairs in Boynton Beach, expect to pay roughly:
- Balance replacement (single-hung): $180 to $320 installed, parts and labor.
- Slider roller replacement: $140 to $260 installed, depending on how far gone the track is.
- Weatherstripping and air-seal renewal: $90 to $210 installed.
- IG replacement (fogged glass panel): $275 to $575 installed, depending on glass size and low-E coating.
What drives the range on an IG unit is glass size and whether the pane has a low-E coating that matches the surrounding windows; a mismatched pane on a Boynton Beach street with consistent sun exposure will be visible from the curb. Every job gets a written line-item quote before we start, no surprises on the bill, and the work is covered by our Done Right Promise. If it’s not done right, we make it right, and there’s no paperwork fight to get us back out.
DIY or Call Us?
This is an honest answer: window balance and roller replacement involve some risk, but it’s not the kind of high-tension danger you get with a garage door spring. Block-and-tackle balances are under tension when the window is closed; if you remove one carelessly, that tension releases fast and can take a chunk of finger or crack the glass. We’ve seen both. If you want to check whether your window is worth repairing, you can look for the label on the sash, measure the visible glass width and height, and note whether the frame is square or has visible gaps. That’s useful information to have when you call. But pulling a balance under tension is work for someone who’s done it before.
If the failure is a fogged IG unit, that’s a job for a glazing shop, period. We order the replacement panel, set it, and register the manufacturer warranty. If you’re not sure what you’re dealing with, call us at (561) 708-6771 and describe what the window’s doing; we’ll tell you straight whether it’s worth a service call.
FAQs
A block-and-tackle balance on a Mr-Glass single-hung typically lasts 8 to 12 years in Boynton Beach before spring fatigue or cord wear shows up. IG seals often fail in 10 to 15 years, but Florida’s heat and humidity push some units to failure years earlier. Call (561) 708-6771 and we can tell you what your window’s symptoms add up to.
No, a failed IG seal cannot be repaired; the sealed airspace is broken and the only honest fix is replacing the insulated glass unit with a new low-E panel matched to your frame. We’ll quote the replacement on paper before any work starts.
Balance and roller replacements are a single visit, usually under an hour per window. IG replacements take a week or so for the glass to come in, then about an hour to set. Call (561) 708-6771 and we’ll give you a straight answer for your job.
We stock the common Mr-Glass OEM balances, rollers, and weatherstripping for the models we see most in Boynton Beach, and we can order the rest. If the part is discontinued, we’ll show you a quality aftermarket equivalent with the same specs on paper, listed side by side. We’ll be there when we say, and the truck carries what the job needs.
If your Mr-Glass window is failing, don’t wait until the next storm or another month of a cooling bill you can’t explain. Call TruePane Windows & Doors at (561) 708-6771 to schedule a free estimate. We’ll give you a square deal on the parts and the work, and if the pane is not true, the job is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.