ES Windows Custom & Geometric Windows Nationwide | TruePane Windows & Doors

ES Windows Custom & Geometric Windows in Boynton Beach: What to Know First

Custom and geometric ES Windows in Boynton Beach typically cost $1,800 to $6,400 per opening installed, with shaped units like arches, trapezoids, and radius windows landing between $2,400 and $7,200 depending on glass package and frame finish. We’re an independent ES Windows service provider, so we handle everything from replacing a fogged geometric fixed unit to fabricating a full custom impact window package. Most custom orders take 6 to 10 weeks from template to install, and repairs on existing ES Windows units are usually done in a single visit. If you own ES Windows and one of those shaped panes has failed, call (561) 708-6771. We’ll tell you straight whether it’s a warranty path or an out-of-pocket fix before anyone rolls a truck.

Call (561) 708-6771

This page is written for Boynton Beach homeowners living with ES Windows custom and geometric units, especially the shaped glass that started this brand’s reputation. Dale Kessler grew up off Lawrence Road in the Meadows section, and he’s been measuring and setting specialty glazing across Palm Beach County for the better part of two decades. We know which ES Windows lines hold up in South Florida humidity and which ones show their age around year twelve.

How ES Windows Products Fail - and How We Fix Them

ES Windows builds handsome aluminum frames with clean sightlines, but Boynton Beach’s salt air and summer humidity work on every window eventually. Here’s what we see on custom and geometric units:

• Radius and arch units lose their seal at the apex first. The curved glass on ES Windows radius units carries more stress at the top of the arc than anywhere else. After eight to twelve years in coastal air, the butyl seal at the apex thins out and the pane fogs. We re-glaze those units with fresh tempered insulated glass cut to the original radius, not a squared-off approximation. The fix costs less than half what a full replacement does.
• Trapezoid and triangle fixed windows crack at the acute corner. ES Windows geometric fixed units cut with angles under 30 degrees concentrate stress at the sharpest point. A hard wind gust during hurricane season or even a settling header can start a hairline crack there. We replace the glass with heat-strengthened or fully tempered lite per the original spec, and we’ll tell you if a stiffer frame reinforcement is worth doing while the opening is open.
• Horizontal rolling units on ES Windows’ Miami-Dade line bind in July. The aluminum track expands in the summer heat, and if the original installer shimmed the frame too tight, the rollers drag. We see this most on wide custom sliders over eight feet. The fix is usually a track adjustment and roller replacement, done in one visit, no new frame needed.
• Custom impact units with water intrusion at the sill corner. ES Windows builds a solid impact-rated product, but geometric openings with odd angles rarely drain the way a standard rectangle does. If the sill flashing wasn’t pitched right on the original install, Boynton Beach’s afternoon thunderstorms push water into the corner. We pull the unit, correct the pitch, re-flash with a proper slope, and reset it plumb. That’s a TruePane fix, not a caulk-and-hope fix.
• OEM hardware on casement geometric units wears faster than the glass. ES Windows uses proprietary crank mechanisms that aren’t sold at the local supply house. When a crank strips on a half-round casement, the manufacturer path can take six weeks. We keep common ES Windows hardware in stock and can usually swap a crank operator same visit. If it’s a warranty item, we’ll help you file it and install the OEM part when it arrives.

Our ES Windows Custom & Geometric Windows Process

1. 1
   Call and talk to a person. You reach a live human at (561) 708-6771. Tell us what’s fogged, cracked, binding, or leaking. We’ll give you an honest sense of what you’re dealing with before we schedule.
2. 2
   We measure twice, and we template shaped openings. For any geometric or radius unit, a technician comes out and templates the actual opening. Not a tape measure guess. A physical template of the curve or angle. Dale grew up in the Meadows and learned early that a sixteenth of an inch on a radius is the difference between a window that seats and one that leaks.
3. 3
   Parts decision on paper. We lay out OEM versus quality aftermarket options side by side, with prices, in writing. If your unit is still under warranty, we’ll tell you and help you work the claim. If it’s not, we quote what we’d actually install in our own mothers’ houses.
4. 4
   Fabrication or repair, done in our shop or on site. Custom glass for shaped units gets cut at a local Palm Beach County fabricator we’ve worked with for years. Straight repairs happen at your house, usually in a single visit.
5. 5
   Install, seal, and test. We set the unit plumb, shim it properly, seal it against South Florida weather, and run a water test on the sill before we clean up. If the pane is not true, the job is not done.
6. 6
   Paperwork before we leave. We register warranties in writing, give you the durations, and back the workmanship with our Done Right Promise. If it’s not in writing, it’s not a guarantee - it’s a conversation.

What ES Windows Custom & Geometric Windows Costs in Boynton Beach

Straight numbers, because you’ve probably been given runaround pricing before. Here’s what ES Windows work runs in Boynton Beach as of this year:

• Replacing a fogged sealed unit in a fixed geometric window: $380 to $950 per pane depending on size and whether it’s tempered, laminated, or low-E.
• Full custom fixed geometric unit (triangle, trapezoid, half-round), non-impact: $1,800 to $4,200 installed.
• Custom impact geometric unit (Miami-Dade rated): $3,200 to $7,200 installed depending on glass package and frame finish.
• Radius or arch replacement glass only: $900 to $2,400 per unit, cut to your exact template.
• Hardware repair (crank operator, roller assembly, locking point): $140 to $380 including parts and labor.

What moves the price: glass thickness, impact rating, frame finish, and how complicated the shape is to fabricate. A true radius costs more than a three-stop arch. Call (561) 708-6771 and we’ll give you a written, line-item estimate. Free. No surprise charges on the back end.

Why Boynton Beach Homeowners Call TruePane Windows & Doors for ES Windows Work

We’ve been installing and servicing windows in Palm Beach County since 2008, and Dale Kessler founded TruePane in 2008 because he was tired of seeing out-of-true installs and voided warranties treated like the homeowner’s problem. We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, and ECO Window Systems, so if your ES Windows unit is beyond saving or you want to compare glass packages, we’ll quote those side by side in writing. Every job carries our Done Right Promise. Both warranty layers get registered before the truck leaves your driveway. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form. You call, a person picks up, and if we say we’ll be there Tuesday at 9, we’re there Tuesday at 9.

FAQs