Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Custom & Geometric Windows in Boynton Beach: What to Know First
Independent CWS service for custom and geometric windows in Boynton Beach typically runs $240 to $1,800 depending on whether we’re replacing a failed glass unit, rebuilding a geometric frame section, or sourcing a specialized radius sash for an oversized opening. Most jobs are completed in a single visit, though curved and arched orders sometimes carry an eight to ten day lead time when the glass has to be cut to spec. We’re not a CWS dealer, and we don’t pretend to be one - as an independent CWS service provider, we quote the fix honestly and let you decide.
This page is for CWS owners in and around Boynton Beach who need straight answers about their custom and geometric windows: what fails, why it fails, what a correct repair looks like, and what it should cost. If you’ve already called around and heard three different stories, you’re in the right place. Call (561) 708-6771 for a free estimate.
Key Takeaways
- We service CWS custom, arched, radius, and oversized geometric windows as an independent provider - warranty-safe practices, no dealer markup on parts.
- Most custom CWS repairs are completed same visit; curved and oversized glass replacements may need 8 to 10 days for fabrication.
- Every job carries our Done Right Promise and The Keystone Standard: both warranty layers registered in writing before we leave your driveway.
- Boynton Beach humidity and salt air attack CWS geometric seals faster than inland locations - we account for that in every estimate.
How CWS Products Fail - and How We Fix Them
CWS built its name on custom architectural windows for coastal homes, and that’s exactly where Boynton Beach properties show the strain first. Here’s what we see on CWS geometric and custom units in this market, and what we do about it.
- Radius and arch units fogging along the lower curve. CWS radius sashes, particularly on second-story arched feature windows in communities like Palm Beach Leisureville and Lakes of Delray, trap condensation at the lowest point of the curve. The seal fails there first because water sits against the spacer. We pull the sash, measure the true radius on-site, and order the replacement insulated unit cut to that exact arc - not a “close enough” stock curve.
- Geometric frame racking on oversized openings. Large trapezoid and parallelogram windows over doors or stair landings put tremendous shear on the frame. We’ve seen CWS frames in Boynton Beach homes where the miter joints open up a quarter inch under hurricane wind load. The fix is a full frame square-and-reinforce: we pull the glass, reset the frame with steel corner keys, and reinstall before resealing. Skipping this step means the new glass fails the same way in two years.
- Sealant breakdown at the frame-to-glass line on coastal-side elevations. Homes east of Federal Highway in Boynton Beach - Ocean Ridge, Briny Breezes, the barrier island - take salt spray constantly. CWS factory sealant on exterior glazing beads dries and cracks, and wind-driven rain finds its way in. We strip the old sealant, inspect the glazing channel for hidden corrosion, and rebed with a marine-grade product rated for constant salt exposure.
- Specialty hardware on CWS geometric casements binding or stripping. Custom angle casements and triangle awning windows rely on hardware that CWS sourced in relatively small production runs. When a crank operator strips or a multi-point lock binds, sourcing the exact OEM replacement can take weeks. We maintain relationships with aftermarket suppliers who machine compatible pieces for CWS geometry, and we’ll walk you through OEM-versus-aftermarket on paper before ordering either way.
- Interior condensation staining the drywall reveal around geometric transoms. This shows up in Boynton Beach ranch homes built in the 1980s and 1990s, where CWS was a popular upgrade for entry foyers. The window itself isn’t leaking - the rough opening was never properly flashed for a shape that sheds water unevenly. We fix the flashing on the frame, seal the reveal, and give you a straight answer on whether the drywall needs a patch or just paint.
Our CWS Custom & Geometric Windows Process
You call, a person answers. Here’s how the actual job goes from there.
- 1
Call and describe what you’re seeing. Fog between the panes, a window that won’t close flat, water staining under a geometric transom. We ask about the window’s location, the year it was installed if you know it, and whether it’s east-facing or west-facing. That last question matters in Boynton Beach.
- 2
On-site inspection and measurement. A background-checked, uniformed technician arrives, removes the interior trim to access the frame, and measures every opening twice. For radius work, we trace the actual curve - no estimating off the old glass.
- 3
Written line-item quote on the spot. You get real numbers in writing, and if a part is back-ordered or has a lead time, the quote says that in plain language. No surprises on the bill later because there are never surprise line items to begin with.
- 4
Parts decision together. OEM when it’s available and sensible, quality aftermarket when the factory lead time is unacceptable or the part is discontinued. We quote both lines side by side on paper so you see exactly what you’re buying.
- 5
Repair or replacement, done in one visit when possible. Glass cut to spec, frame squared and shimmed correctly, new sealant, hardware adjusted to close flat and lock true. Dale Kessler’s rule governs every step: if the pane is not true, the job is not done.
- 6
Test, clean, register warranties in writing. We open and close the unit, check the seal with a moisture meter, and register both manufacturer warranty layers before the truck leaves your driveway. You get copies. We stand behind it.
What CWS Custom & Geometric Windows Costs in Boynton Beach
Here are honest ranges based on jobs we’ve done across Boynton Beach over the years. Every estimate is written, line-itemed, and free.
- Replacement insulated glass unit in a standard CWS double-hung or casement: $240 to $520 installed, depending on glass package and low-e coating.
- Radius or arched CWS glass replacement: $680 to $1,400, driven by the fabrication cost of cutting true curves and the additional labor to reset the sash correctly.
- Geometric frame square-and-reinforce (trapezoid, parallelogram, oversized triangle): $450 to $1,100, depending on size and whether we’re replacing corner keys, adding steel reinforcement, or both.
- Full CWS geometric sash replacement (frame and glass together): $1,200 to $1,800 for most sizes; wider or taller custom spans push toward $2,400.
What moves the price: size, whether the shape is a true radius or a segmented curve, east-facing salt exposure (coastal-side homes need marine-grade sealants and sometimes stouter hardware), and whether the frame itself is still square. A repair that skips the frame check is cheaper on paper and more expensive in two years. Call (561) 708-6771 for a free estimate and a real number, not a range.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for CWS Work
We’ve been doing this in Palm Beach County since 2008 through a heritage of craft that started with Dale Kessler’s hands and his father’s finish-carpenter instincts. TruePane Windows & Doors was founded in 2008 because Dale kept seeing the same thing on CWS and other custom lines: windows installed out of true, warranties voided by shortcut work, and homeowners left holding the bill. We fixed that by putting the guarantee in writing and meaning it.
Our techs know CWS geometry, but we also install and service PGT, CGI, ES Windows, and ECO Window Systems. That matters when a CWS part is discontinued and the honest answer is a compatible line from a manufacturer we already trust. Every job carries our Done Right Promise: if it’s not done right, we make it right, no paperwork and no arguing. A live person answers our phone 24 hours a day, seven days a week. Call (561) 708-6771 and someone who knows windows picks up.
FAQs
Yes, in most cases. CWS arched and radius windows are built so the sash comes out separately from the frame, which means we can order replacement glass cut to the exact curve of your unit and reinstall without touching the structural opening. Where the frame itself has racked or the miter joints have opened, we’ll tell you honestly before any work starts.
Call (561) 708-6771 for a free inspection and straight answer on your specific arched unit.
For standard CWS hardware and rectangular replacement units, most parts arrive within three to five business days. Radius and curved glass fabrication typically runs eight to ten days because the glass must be cut to the measured arc rather than pulled from stock. If a CWS part is discontinued, we quote compatible aftermarket options side by side on paper so you can decide what’s worth it.
Call (561) 708-6771 for a written quote with real lead times, not estimates.
A correct repair done with compatible parts will not void a warranty that is still active, but we never assume. Before any work starts we confirm what your CWS warranty actually covers, whether it’s still in effect, and whether a repair through us makes more sense than pursuing the manufacturer claim. Some CWS original warranties were tied to the installation and expired long ago, especially on Boynton Beach homes built decades before the current owner’s time.
Call (561) 708-6771 and we’ll help you understand exactly what your warranty does and doesn’t cover.
It depends on where the failure is. A fogged radius glass unit is almost always worth repairing - the frame, hardware, and structural opening are typically fine, and a replacement glass package costs a fraction of a new custom window. If the frame has racked, the miter joints are separating, or the original flashing was wrong from day one, replacement may be the honest answer. We’ll show you the numbers for both options and let you decide with a square deal in writing.
Call (561) 708-6771 for a free estimate that covers repair and replacement side by side.
No. We quote a fixed price in writing before we begin, and the number on that quote is the number on your bill. If we find hidden damage - which happens on older Boynton Beach homes - we stop, explain what we found, and give you a new written quote before touching another square inch. You always decide. We don’t work any other way, and we’ve been doing it like that for over four decades.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.