Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Impact Windows in Boynton Beach: What to Know First
PGT impact window repair and replacement in Boynton Beach typically runs $285 to $1,400 per opening depending on whether you need a new laminated glass unit, a roller or balance replacement, or a full frame swap. Most single-window repairs take one visit, and we carry the PGT parts that Boynton Beach homes actually need rather than ordering everything from the factory and making you wait. We’re an independent PGT service provider, not a factory affiliate, which means our interest is in fixing your window the right way, not steering you toward a whole-house replacement you may not need.
This page is for homeowners in Boynton Beach who already own PGT impact windows and want straight answers on repair work, realistic costs, and the failure patterns we see most often. If you have a window that fogs, a sash that binds in August, or a roller that sounds like gravel in the track, call (561) 708-6771 and we’ll talk through it.
How PGT Products Fail – and How We Fix Them
- Seal failure on PGT WinGuard casement and picture windows. This is the fogged-glass problem that shows up right around hurricane season, never in March. The laminated glass unit loses its seal and moisture creeps between the panes. We replace the insulated glass unit with a new laminated unit that holds the Miami-Dade NOA rating. On a WinGuard picture window in Leisureville, we found the original seal had failed because the frame was set slightly out of square, which put constant pressure on one corner of the glass. We shimmed the frame true before setting the new unit.
- Roller wear on PGT 5500 and 7700 sliding glass doors. Boynton Beach sand gets into the bottom track and grinds the nylon rollers down over a decade or so. The door starts dragging, then the handle jiggles loose from the extra force. We pull the door, clear the track, and set new rollers. If the track itself is worn, we’ll tell you plainly rather than putting new wheels on a bad rail.
- Sticking sashes on PGT 2300 single-hung and 2200 horizontal sliders. The aluminum frame expands in South Florida heat and the sash binds if the frame was not properly shimmed at install. We see this on homes along Lawrence Road where the afternoon sun hits the west wall for hours. The fix is not a new window; it’s pulling the sash, correcting the shim points, and resetting it so it moves cleanly through the full range.
- Corrosion at the weep holes on PGT 2500 impact windows. Ocean air carries salt that settles in the weep holes and eventually eats at the aluminum around the frame base. Left alone, the weep holes clog and water backs up into the track. We clean out the corrosion, treat the frame, and recut the weep holes if they have closed up. This is a maintenance issue specific to coastal Boynton Beach, and it’s one of the most common calls we get from the Meadows neighborhoods.
- Hinge sag on PGT WinGuard casement windows. Casement windows carry a lot of weight on their hinges, and when the hinge wears, the corner of the sash drops and the weatherstripping stops sealing. We replace the hinge with the correct weight-rated part for the sash size and realign the operator. A sagging casement is also the first warning that the frame was not set level, so we always check the opening before we mount new hardware.
Our PGT Impact Windows Process
Here’s how a PGT job goes at TruePane Windows & Doors, from the first phone call to the cleanup.
- 1
Call and diagnosis. A live person answers, 24 hours a day. We ask what you’re seeing and what you’re hearing. A grinding roller sounds different from a fogged seal, and the difference tells us which parts to bring.
- 2
Site visit and measurement. A background-checked, uniformed technician measures every opening twice and inspects the frame, not just the broken part. If the frame is out of true, fixing the part without fixing the frame means you’ll call us again in two years.
- 3
Quote on paper. We quote the PGT repair alongside comparable options from other manufacturer lines we service, including CGI, CWS, ES Windows, and ECO Window Systems. You see the line items before you agree to anything.
- 4
Repair or replacement. We use OEM PGT parts where the warranty and the job call for them, and quality aftermarket parts where they perform as well and save you real money. We tell you which is which and why.
- 5
True-pane check. After setting the glass, adjusting the sash, or mounting new hardware, we check the pane with a level and check the operation through the full range. If the pane is not true, the job is not done.
- 6
Warranty registration and cleanup. We register both manufacturer warranty layers in writing before the truck leaves the driveway, and we clean up after ourselves. Your Done Right Promise starts the day we finish.
What PGT Impact Windows Costs in Boynton Beach
| PGT Repair Type | Typical Cost in Boynton Beach |
|---|---|
| Insulated glass unit replacement (WinGuard, 2300, 5500) | $350 to $900 |
| Roller replacement on sliding glass door (5500, 7700) | $225 to $475 |
| Casement hinge and operator repair (WinGuard) | $285 to $525 |
| Sash re-shim and re-set (2300 single-hung) | $300 to $650 |
| Full frame replacement of a damaged PGT impact window | $800 to $1,400 per opening |
What moves the price is whether you need a new laminated glass unit or just new hardware, the size of the opening, and whether the frame itself needs correction. We do not charge extra for the estimate, and the quote you get is the number on the bill. No change orders, no surprise line items. Call (561) 708-6771 for a free estimate on your PGT repair.
Why Boynton Beach Homeowners Call TruePane Windows & Doors for PGT Work
We’ve been in this community since 2008 through a heritage of craft and commitment that started with Dale Kessler, a second-generation glazier who grew up off Lawrence Road in the Meadows section of Boynton Beach. We’re the company that sponsors the county fairs and the church roof funds, because we plan to be here in thirty years. When something goes wrong, we answer the phone. A live person, not a recording, not a callback form.
Our Done Right Promise means if the work isn’t done right, we make it right. Both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves your driveway. If it’s not in writing, it’s not a guarantee – it’s a conversation. And because we’re an authorized installer for more than a dozen lines including PGT, CGI, CWS, ES Windows, and ECO Window Systems, we’ll show you your options side by side on paper and let you decide.
FAQs
We’re an independent PGT service provider, not a factory-authorized warranty station. That means we work for you, not the manufacturer. We’ll keep your warranty intact by using the right parts and registering the work correctly, and we’ll tell you frankly if a factory warranty claim is the better route for your situation. Call (561) 708-6771 and we’ll help you figure it out.
Most single-opening repairs are done in one visit, usually two to four hours. If we need a custom laminated glass unit, that’s typically a week to ten days for the glass to come from the fabricator. We’ll tell you the timeline before we start, and we’ll be there when we say.
If the frame is square and sound, repair usually makes sense and costs a fraction of replacement. If the frame is corroded, bowed, or not properly shimmed, we’ll tell you straight, because repairing a bad frame just delays the replacement bill. We’ll show you both numbers side by side and let you decide.
Yes, where they’re the right call. OEM parts are the safest choice when your window is still under factory warranty or when the part is unique to the frame design. There are also quality aftermarket parts – rollers, hinges, some hardware – that perform as well and cost less. We’ll tell you which is which, and the choice is yours. Call (561) 708-6771 for an exact quote on your PGT repair.
Yes, and this is more common in Boynton Beach than most homeowners realize. A window that fogs early, binds in humid weather, or leaks at the corners often points back to a frame that was set out of true at install. We correct the shims, reset the frame, and then fix the window. That’s the TruePane difference, and it’s covered by the same Done Right Promise as everything else we do.
If you have PGT impact windows in Boynton Beach and something isn’t right, call (561) 708-6771 for a free estimate. We’ll measure twice, quote on paper, and stand behind the work in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Boynton Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.