Mr-Glass Windows & Doors Service Nationwide | TruePane Windows & Doors

Why Boynton Beach Homeowners Choose Mr-Glass Windows & Doors

We provide independent Mr-Glass windows and doors repair and replacement across Boynton Beach, and we know these products down to the frame joinery and balance systems. If you own a Mr-Glass 8700, 8800, 8400, or 8200, we can diagnose the failure, source the correct part, and fix it without selling you a whole new opening you don’t need. We are not an authorized Mr-Glass dealer and we don’t claim to be. What we are is the shop that sees these windows every week, especially in the older CBS communities along the Intracoastal where salt air and humidity test every seal, roller, and balance.

Call (561) 708-6771

Dale Kessler has been setting glass in Palm Beach County for decades, and our techs have serviced Mr-Glass products in high-rises, canal-front condos, and the age-restricted communities that make up so much of Boynton Beach. If you need a straight answer about your Mr-Glass windows, call (561) 708-6771.

Why Trust TruePane Windows & Doors for Your Mr-Glass Windows & Doors?

Mr-Glass windows fail in predictable ways, and we know the failure patterns because we’re inside them routinely. The spiral balance on an 8800 double hung loses tension. The glazing bead on an 8700 single hung snaps at the corner. The 8400 roller flattens on the bottom track. The 8200 casement lock rod bends after years of repeated cranking. None of this is guesswork for us. We carry the OEM hardware for the common failures and keep proven aftermarket equivalents for the out-of-production series, matched to the same spring rates and tolerances as the original.

We work on Mr-Glass the way a mechanic works on a familiar engine. Not because we sell the brand, but because Boynton Beach is full of it and someone has to fix it right. Dale grew up in the Meadows section off Lawrence Road, went through the building construction program at Palm Beach State College, and spent the better part of two decades measuring, glazing, and setting frames across Palm Beach County. That background is why we measure every opening twice and why we register both manufacturer warranty layers in writing before the truck leaves your driveway. If it’s not in writing, it’s not a guarantee, it’s a conversation.

We’re background-checked, uniformed, and we answer the phone with a live person every time you call. No voicemail tree. No callback form. You call, a person picks up.

Common Mr-Glass Windows & Doors Problems We Fix in Boynton Beach

• Mr-Glass 8800 Double Hung: Spiral Balance Failure. The spiral balance on the 8800 loses tension over time, especially in Boynton Beach’s salt air, where the internal spring corrodes faster than inland. The sash starts to drop, slam shut, or refuse to stay open. We replace the balance and pivot shoe as a pair, re-tension both sides, and the window holds at any height again.
• Mr-Glass 8700 Single Hung: Cracked Vinyl Glazing Beads. The glazing beads on the 8700 are thin vinyl strips that hold the glass in the sash. After enough thermal cycling and wind flex, they snap at the corners, and the glass starts to rattle. We replace the beads and re-seat the glass. You don’t need a whole new window for this.
• Mr-Glass 8400 Horizontal Roller: Worn Rollers on the Bottom Track. The roller wheels on the 8400 flatten over time, especially when sand and salt grit work into the track. The sash drags, jams, or comes off the rail entirely. We replace the rollers, clean and lubricate the track, and the sash glides again.
• Mr-Glass 8200 Casement: Bent Multi-Point Lock Rods. The 8200 casement uses a multi-point locking rod that runs the length of the sash. Repeated cranking bends the rod, the sash loses alignment, and the window won’t seal. We carry the lock rod hardware and can straighten or replace the mechanism without replacing the sash.
• Blown Insulated Glass Units Across the Mr-Glass Line. When the seal on a dual-pane unit fails, condensation forms between the panes and the window loses its insulating value. In Boynton Beach, seal failure is accelerated by coastal humidity and salt air. If the IGU is blown, we recommend replacement of the glass unit, not a patch job, because no repair restores a failed seal.

Mr-Glass Parts & Our Repair-vs-Replace Approach

We use OEM Mr-Glass balances, rollers, lock hardware, and glazing beads whenever the part is still available. For older Mr-Glass series that have been out of production for years, we source proven aftermarket equivalents that match the original spring rates, dimensions, and tolerances. We don’t substitute cheap generics that fail after a season. If the part is not a proper match, we tell you before we install it.

Here’s our honest rule on repair versus replace. If the frame welds are intact and the failure is a wearable component like a balance, roller, or lock rod, we repair. If the insulated glass unit is blown or the vinyl corner welds are cracked, repair costs climb close to replacement cost, and we recommend replacement instead. We’d rather tell you that upfront than charge you for a repair that won’t last. Call (561) 708-6771 and we’ll give you a straight read on which side of the line your Mr-Glass window falls.

Our Mr-Glass Service Process - Step by Step

1. 1
   Diagnosis. We inspect the sash, frame, hardware, and track to identify the exact failure. On an 8800 double hung, we check the spiral balance and pivot shoe. On an 8400 horizontal roller, we lift the sash and inspect the roller wheels and track condition.
2. 2
   Repair or Install. We pull the sash, replace the failed component with the correct OEM or matched aftermarket part, and re-tension or realign everything to the window’s original spec. We measure every opening twice before any new unit goes in.
3. 3
   Test. We cycle the window through its full range of motion multiple times. The sash should hold at any height, the roller should glide without drag, the lock should seat cleanly. If the pane is not true, the job is not done.
4. 4
   Warranty. Before we leave, we register both manufacturer warranty layers in writing and confirm your coverage under our Done Right Promise. You get the durations in writing, not a verbal promise.

Mr-Glass Products We Service & Install in Boynton Beach

We service and install the full Mr-Glass residential line: the 8700 Single Hung, the 8800 Double Hung, the 8400 Horizontal Roller, and the 8200 Casement. We also handle Mr-Glass patio doors and related hardware. We keep common Mr-Glass balances, rollers, pivot shoes, lock rods, and glazing beads in local stock so most repairs happen on the first visit, not after a two-week parts wait. When you call, ask us if we have your part on the truck. Most days, the answer is yes.

We Also Service These Brands

Mr-Glass is a big part of our work, but it’s not the only window we know. TruePane Windows & Doors is an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, ES Windows. If you have a multi-brand home, one call covers it.

FAQs - Mr-Glass Windows & Doors Service in Boynton Beach

Book Your Mr-Glass Service in Boynton Beach, FL

If your Mr-Glass window is failing, don’t wait for the sash to drop or the seal to blow completely. Call TruePane Windows & Doors at (561) 708-6771 for a free estimate on Mr-Glass service in Boynton Beach. A live person answers, and we’ll schedule a visit that fits your life. We stand behind the work, in writing.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boynton Beach since 2008.